Jump to content
SAU Community

Recommended Posts

1. Modify your new inlet to be able to take the ventilation hose (and this has to be done BEFORE the afm)

no, you want it after the afm (which is where it is stock) so your afm doesn't get covered in oil.

whatever you do don't block the ventilation pipe. if you do you will just blow your pcv out the moment you boost it. the pcv only works under vaccum. just put a breather on it for now ,then either get a catch can or plum it back into the intake pipe.

no, you want it after the afm (which is where it is stock) so your afm doesn't get covered in oil.

whatever you do don't block the ventilation pipe. if you do you will just blow your pcv out the moment you boost it. the pcv only works under vaccum. just put a breather on it for now ,then either get a catch can or plum it back into the intake pipe.

thats what i meant, in betweem the turbo and the afm, i was just picturing it my head and if i saw the pod, afm, hose then turbo in a straight line i would say before the afm but thats just me lol.

But like i said i meant in between the inlet of the turbo and afm...

Edited by R34GTFOUR

i've picked up an oil breather for now, i planned on getting a catch can in the near future, so is it wise to get a catch can with an oil breather on it or is it pretty imperative that the air come from the intake pipe and i get an inlet welded in?

next time, buy a 1m vacum hose of the right diameter and run it from the top of the cam cover where the other end connects to, and have the other dangle under the car somewhere or on a cable tie. all that comes out is oily air, not really oil flow type oil.

you will notice no performance difference, just an odour all the time until you fix properly. make sure not to have it in front of a tyre or on the exhaust and your set.

*TEMPORARY* you wont hurt the motor but will not be helping the environment.

you will not have to change oil more frequently, as the tiny bit of oil in this pipe was about to be burnt up with your petrol anyway. racecars dont want motor oil in their petrol because it produces inconsistent octane leading to detonation. if there is a lot of oil coming out, you have much bigger problems than a missing inlet pipe.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
    • I would agree, unless you need something specific to the HV motor/battery side repaired or investigated, any mechanic will be able to perform normal services, but if you prefer, maybe look for a mechanic who regularly services/repairs Nissans, the VQ engines are pretty common in the Nissan lineup.  Sorry, I can't make any suggestions, I don't live in Vic.
    • Some of them keep working fine. 9 out of 10 of them end up causing an absolute misery bleeding the system and get thrown on the workshop floor in a tantrum and never thought about again because they were never really needed and just added crap to the car that we could have done without. Same-same with HICAS, A-LSD, and various other stupidities that over eager 10x engineers thought we had to have.
×
×
  • Create New...