Jump to content
SAU Community

Recommended Posts

Hey,

Got a major issue. My car will drive fine in 1st and 2nd, but once it gets to 3rd all it does is REV, it won't actually drive the car.... It is like its in neutral

I know its a bit hard to say, but what could it be? has it happened to anyone else? what could cause it?

Before you ask, yes there is trans fluid in there and its not low.

Could it be clutchpack? valve body?

Pls help :D

Edited by benny bobo
Hey,

Got a major issue. My car will drive fine in 1st and 2nd, but once it gets to 3rd all it does is REV, it won't actually drive the car.... It is like its in neutral

I know its a bit hard to say, but what could it be? has it happened to anyone else? what could cause it?

Before you ask, yes there is trans fluid in there and its not low.

Could it be clutchpack? valve body?

Pls help :D

hi,

i had a similar problem with my mates car.. have you tried changing the transmission fluid?

I just ran the diagnostics and got 1 long flash and 10 short flashes

the "The Sky is the limit" pdf document states this means:

- Line pressure solenoid shorted or disconnected

Could this be the reason for the problem?

How do I fix this?

  • 2 weeks later...

The Reason Why The Engine Is Free Reving Is It Sounds Like The 3-4 Clutch Pack Is Burnt Out. Common Problem. What Needs To Happen Is That The Transmission Needs To Come Out Of The Vehicle And Either Be Repaired Or Rebuilt. There Is No Easy Fix For This Problem. What Happens Is The Line Pressure Solenoid Fails And Drops The Line (Clutch) Pressure Which Burns The 3-4 Clutch Out. Probably Get Shitty Into Second As Well. The Guys At GoldCoast Automatics Do A Good Job. Ask For Robby ( The Boss )

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Did a conversion on my rb20 with rb25 cam and pulley, controlled it with a solenoid (forgot the port diameter of the solenoid)  and made an oil port on the cam cap to lower pressure in the journal. Difference  is day and night, the rb20 isn't dogshit down low anymore, not a powerhouse but this had add much welcomed torque down low. Boost build a bit sooner and torque rise way more when it start building boost. Only need to deactivate the VTC past 6500/7000rpm.   Knowing how it help with only 2L, having it on 2.6L it should be a mod to think about early on as it gives a lot of performance on most on the rev range.
    • https://www.nengun.com/hks/valcon-rb26-v-cam-system   no controller but most will use ECU to control anyhow
    • Not too sure, the throttle body has 4separate plugs going to it. Im not sure if the throttle is driven by cable and the motor is for traction, cruise and something there light blue one is TPS. i don't understand why the throttle won't open with the cable until about 3/4 on them only moves the valves very slightly
    • There are other crowds doing 25Neo conversion kits.
×
×
  • Create New...