Jump to content
SAU Community

Recommended Posts

I read the specs on the stagea a while back as I am havin a good think about getting one someday, and wondered what they perform like in the everyday carpark scinario. Turning circle in the specs = 5.3 metres, and that's huge! Can you get a steering rack that makes the turning radius smaller?

Link to comment
https://www.sau.com.au/forums/topic/181049-stageas-in-carparks/
Share on other sites

Huge? are you used to driving a barina or something?

Turning circle is hardly a factor i'd decide whether a car is good or not. I mean, I have a skyline - same gear. I have never found it a PROBLEM. e.g. I don't go oh shit, ran out of steering lock when trying to park...

In answer to your question, yes you can

Barina - no. Ford Laser - yes. it has...or should I say - had, a nice small turning circle. Thanks for answering the question too. I don't rate it steering as a major factor, but thought i'd throw the questions out there.

Well, as a direct comparison to my last car (eb falcon) I think the stag parked beautifully. Before you compare it to a laser, you may want to compare the wheelbase and interior space too.....

The Stagea has a pretty decent turning circle considering the fact that there are drive-shafts running to the front wheels too (unless you go for a RWD version). I came from a Corolla, and my old man still has a 2003 Camry. The turning circle on the Corolla was great (obviously, because it was a small car), but the Camry's turning circle is worse than my car's...

One thing with the Stagea is the rear overhang, but what's good is that the rear window is almost vertical, so it's pretty easy to judge how much room you have behind you if you reverse park into a spot. It's also good because it makes the load area much more useful, compared to a hatchback or a wagon with a steeply-sloping rear window area.

FFS you buy a car and you are worried about the tunring circle? Forgive me for saying this but how long have you had your license for?

In a car thats 4wd the turning circle is going to be always a large one. It doesnt mattes wheter is a sedan or suv. Why? Like they say theres Cv joints in the front wheels that drives it. Thats the factor that limiting the turning circle. Get it?

Driving skills is all you need to drive in a car park. One advise when driving such a long vehicle always go for a rear entry :P:D . Which means rverse in instead of parking head in first try it.

Rather than start a new topic i'm going to follow on with a similar question:

How's the reverse parking go with the Stagea? I'm coming from a Subaru Liberty Sedan and it's easy enough to park in tight spaces - I"m guessing Stag's aren't too bad in that respect?

Rather than start a new topic i'm going to follow on with a similar question:

How's the reverse parking go with the Stagea? I'm coming from a Subaru Liberty Sedan and it's easy enough to park in tight spaces - I"m guessing Stag's aren't too bad in that respect?

Like I mentioned above, Ian, having a good-sized rear window and an almost vertical tailgate helps heaps. You know that if there's roughly 2ft to the rear window from a wall, that roughly half of that should be left for the bumper. Of course, if you're gonna open the tailgate later to get the shopping in or whatever, don't forget to leave more room.

I find it enormously better than my 70 series Supra in carparks, for the simple fact that the Supra's doors are about 3 km long, and you had to take at least 6 months of yoga before even contemplating using anything but the aerotop for ingress/egress. Sure, the turning circle is a little wider than a Lotus Elise, but it's a Large car!

Ive never had an issue in a carpark and ive had to park in some stupid stupid spots.

On another note, want more lock, get aftermarket tie rod ends and adjust them for more lock, then a wheel alignment to adjust toe.

Otherwise, remove the rod ends and insert some spacers, aka washers, when screwing the rod end back in. This will do the same thing but in a less safe more borro drifter kinda way....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Another question sorry, what stainless do u use in the turbo external WG plumb back piping? Is it 321, 316 or 304?
    • Right, its been a while for updating this car, but I made some small but important progress today. In the end I bought an Ecutek dongle from the Australian distributor Tunehouse (for local hardware support) but have gone with a remote tune from Racebox in the US (because they have done millions of these, and I could not find any tuner where I could access the tune anyway as they are all password locked). The App is reasonably easy to work with, but the PC software reminds me of Haltech's ECU Manager that you need to use with the Plat Pro ECUs, it is a nightmare.  Anyway, I sent the details over, got back a tune file and a request for data logs. I finally got a chance to access a private test track today as they want redline logs in 3rd and 4th, and have sent them back for the first round of reviews. The main difference in the tune is going from 1.0 (stock) to 1.3 bar (19psi), although I'm sure is a lot of other stuff in the background. Keeping in mind this is a dead stock car with 125,000klm, this is what the App's performance test claimed: Before After Interesting to note that both 400m tests had the same terminal speed (158klm/h) but different ETs. And no, the speed limiter seems to be higher than that at 186kl/h. Summary of the key logged parameters for the 3rd and 4th gear runs were: Those little turbos were certainly whizzing at 200,000rpm+.  Also I'm really not that excited about oil pressure 55psi at redline so I think I'll go thicker than 5w30 (nissan recommend 0w20....) and see if that improves it. Other than that (and the big boost spike....) everything looks good as a start to me.
    • Just one more post to show the final result and the original "janky" solution for a laugh. Everything feels really tight and no wobbling at all, very pleased 🙂
    • After drying a few days, time to put her back together 
×
×
  • Create New...