Jump to content
SAU Community

Recommended Posts

Thanks to some ford owner, i now have a new rear end on the skyline. :)

He was towing a trailer, and somehow didn't see me stopped in traffic on Springvale Rd last night and went straight through me.

I guess that the damage is not all that bad. The bumper is pretty messed up and popping out at the sides. It has been pushed in enough so that the boot lid is sticking out about 5cm. The lights aren't broken, but their housing now has a gap between it and the panel.

The worst part, he is not insured, but he said that he will pay for it all.

So, now i have to get quotes for it all, and was wondering if anyone knows of any good body shops that will do the work well.

I'm in the SE suburbs, around Glen Waverley.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/18137-body-shops/
Share on other sites

  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

theres a good one down this way near the moorabbin airport... ive seen plenty of Skylines, 350zs, porsches, Turbo Fords etc getting fixed there... getting a quote off them today about my car and got them to paint the filler flap off my gfs soarer... will get some details and let u know.

Link to comment
https://www.sau.com.au/forums/topic/18137-body-shops/#findComment-378564
Share on other sites

Yep, nark i vouch for those guys

Palm Motors on Center Dandenong Road just after the Moorabbin Airport heading towards Nepean Hwy

Con is the boss, he may be expensive, but will do the job properly

His done a fair amount of work for us through our company

And seeing as your not paying and he run up YOUR ass get the best job for the car

DONT take it to a place that the guy that caused the incident suggested, youll never get the job done properly and have problems later on

Link to comment
https://www.sau.com.au/forums/topic/18137-body-shops/#findComment-378585
Share on other sites

I'll have to give these guys a call.

As you said, I'm not paying for it, so I'm happy to go to someone who might cost a bit more, but will do it right the first time. I will just have to make sure that i get a few other quotes around their price.

I agree with what your saying regarding not going to a place he might suggest. For all i know, it could be one of his mates doing the dodgy for him. He is in the wrong, so he will do as i want. I don't want to screw this guy over, but I'm not going to get screwed in the process of being decent.

Link to comment
https://www.sau.com.au/forums/topic/18137-body-shops/#findComment-378638
Share on other sites

arsn i actualyy work at a panel shop in clayton nth is ya still need help with you car drop me a pm and ill be glad to give ya the address

just a note ive repaired enough skylines in my time and i know where to get brand new parts if needed

i have 15yrs experiance in the industry

Link to comment
https://www.sau.com.au/forums/topic/18137-body-shops/#findComment-380189
Share on other sites

lol whistla... might go for another midnight run past ur house :D oh wait its 2am already

went down today and yeah they know what they are doing.. hes also got a pair (not all 4) of 18" 350z wheels and tyres which im guessing he wants to offload if anyone wants em :P

will be going back to drop off my 32 (they had a 32, 2x 33s, s14 and a few others in there at the time) to get the GTR front end put on and sprayed... will attach all the parts myself and repair the minor dints then get them to do the rest.

Link to comment
https://www.sau.com.au/forums/topic/18137-body-shops/#findComment-380230
Share on other sites

hey narkeh... u gonna use you're stock front right hand guard? I've got a few dents in mine and want a clean black one.

BTW do you know how to take the rear bumper off? think its about time I bent that bracket back into shape.

Link to comment
https://www.sau.com.au/forums/topic/18137-body-shops/#findComment-380264
Share on other sites

it aint hard dude... judging by the way the bar joins the main body i would assume it has 2 10m bolts/nuts u need to undo inside the boot on each side... im sure u can find the rest with a little rummaging... right hand guard (stock one on mine) has some scratches on it... ones that wont buff out.

Link to comment
https://www.sau.com.au/forums/topic/18137-body-shops/#findComment-380269
Share on other sites

Why is it that every ****stick that hits you never has insurance??

I've had about 2 guys hit me over the years, and neither have had insurance. Least my insurance policy has the "we **** them up the ass in court and you still get your car fixed" :P With people like that, they deserve it.

Link to comment
https://www.sau.com.au/forums/topic/18137-body-shops/#findComment-380343
Share on other sites

I dropped into that Palms place on Saturday morning. He said that it is going to take a bit of work to get it all fixed. Said that it should cost about $4000, and he'll need my car for about 2 weeks.

But he did really sound like he knows what he is doing, so i figure that i will go back there. I'm just going to go through my insurance company and let them chase him for the money.

I'm now wondering what I'm going to do for 2 weeks without my line. I don't think that I'll be able to handle it.

Link to comment
https://www.sau.com.au/forums/topic/18137-body-shops/#findComment-383571
Share on other sites

ouch 4k... that sux. 2 weeks is a long time to go without ur car... i feel for u. I will have to do the same once i take mine there to get the car sprayed and GTR front end fitted.

but i';ll have the gfs soarer so it wont be all bad

Link to comment
https://www.sau.com.au/forums/topic/18137-body-shops/#findComment-384092
Share on other sites

I might have to steal my mothers car so that i can get around, but that is a dodgy seca. That thing is way too slow for me.

I just called the insurance company and they want me to take it to one of their approved repairers to get a quote from. I just hope that it is high so that i can take it back to Palms and get them to look after it. I don't want someone who knows nothing about skylines to look after it. I might have to shock him with some info about how hard they are to fix.

Any ideas?

Link to comment
https://www.sau.com.au/forums/topic/18137-body-shops/#findComment-384171
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Actually,  just remembered there should be info in the threads (somewhere) about swapping to a manual steering rack and deleting power steering all together. 
    • Also had a look at the Nissan JP website looks like the 400r has a slightly shorter ratio than than the regular V37 3.133 VS 2.937 which from a guy who has driven both 3.69 vs 4.11 ratios in the S15 is bugger all. Seems that the AUTO Z runs the same ratio as the 400R but can't find any info as to if its an open or LSD? More often than not the auto LSD is open
    • Do not replace the power steering lines with this stuff. If it's anything like the Chase Bays stuff it will leak and be worse than stock. The reason why the reservoir is on the LH/passenger side of the car is because that's just where the reservoir was most convenient to fit. Don't overthink this stuff. The intake/cold side of the engine is pretty busy on these cars. And again, the hardpipe is designed to be a janky power steering cooler. In theory you can replace it with a real power steering cooler but that's really only for track use where boiling the fluid is a distinct possibility. Start with the low pressure lines feeding the pump from the reservoir. Make sure there isn't a bunch of junk in the reservoir filter. Be careful to not get ATF all over the engine bay. I hate dealing with ATF spills, you can clean it up and the slightest crevice will still release more oil that can still drip over time. You also want to inspect for leaks before you make a mess and can't tell what happened. Most likely you have a leak somewhere that is allowing fluid out and air in. Failing that it's allowing air in but not fluid out. Only place I can really see that happening is on the low pressure side because the pump will pull a slight vacuum to draw fluid in. Everything after the pump is high pressure or lower pressure, approaching atmospheric by the time it returns to the reservoir.
    • I did a skidpan night at SMSP this week, it was much cheaper than $350. But yeah, you need to slap an LSD in that thing.  I put an OS Giken in the 370Z and it's f**king MARVELOUS even compared to Nissan's viscous LSD. So you're saying it's free now that it's a housing estate? 😂
    • Nah, the car seems to run exactly as it did prior, in saying this it does "seem" to be better down low, like more eager to rev, but that may be 100% placebo effect from intake noise But, I'm not worried about it at all, in the end it is a fairly low compression NA engine that has a well shrouded intake,  if it is getting hotter IAT I cannot notice anything negative performance wise from the seat of my pants thrashing it about on the street or sitting in traffic, so meh, car now now makes induction noise so I'm happy
×
×
  • Create New...