Where To Fix Blender Motor In Melb?

[charlieR34]

hey there

i think the blender motor behind the climate control aint working... does anyone know a place in melb that actually fixes these kinda thing?

thank you

[Rekin]

Got similar problem in my r32.

Better off buying a second hand one from a wrecker or a new one from Nissan.

TypeM wreckers (in dandenong) quoted me $70 for a 2nd hand blend door motor and $100 for installation.

Else, you can buy the motor and go to any reputable air conditioner mechanic and they should be able to do it.

[adam-__-]

Just make sure that the motor is actually dead first mate. From my experience, something like a shake of a cable could get it working.

[Rekin]

yeah run the ac diagnosis test to see if you get blend door servo motor (not sure if r34 has it, r32 and r33 do)

Mine is messed, sometimes it locks up and sometimes it works lol

[foznice]

R34 has the AC diagnostics too. If the cable is rooted the test should let you know about it.

The r32 blend doors cost $100 brand new from Nissan. I got one second hand for $80. I don't really think you need to be an air conditioning mechanic to do it, as replacing the blend door is a matter of unplugging it, and unscrewing 4 screws. If your comfortable with pulling out bits of your interior then its definatly worth doing yourself.

[boomtheroom]

i might have this problem my air con is blowing hot air most of the time , then sometimes it works, i got a code 26 error a few times doing diagnostics which means pbr according to the manual, is this refering to the blender?

[boomtheroom]

where is it actually located?

[femno]

Is the motor clicking when you move between modes?

If so, you can fix it by cleaning and lubricating the slides and flap pivots.

I did it, takes a while but its easy.

[Rekin]

i noticed that the wireloom running next to the blend door motor is the cause of most malfunctions.

By pushing the connector harder into its socket the blend door starts moving as i put the temperature up/down.

The blend door motor is located;

1. go passenger side, stick head into feet area, try and look behind the console (where the headunit is). Basically look at where the feet air vent is.

2. You will then see a metal rod, this is the rod which opens/closes the flap. There should be a wire loom located right next to it, try pushing that upwards whilst mashing the temp up/down. Hopefully it will start to move