Jump to content
SAU Community

Air Con Probs R33

klenn

By klenn,
in General Maintenance

 Share

Recommended Posts

klenn Contributor

klenn

Posted
Posted

hi guys thort id try and pick your brains and see if anyone knows much about air con in these skylines.

when I change from the different settings from demister to feet it makes a click click clack noise from somewhere it sounds somewhere at the top of the dash, I have done a search and apparently it is the plastic cogs on the stepper motors, whats involved in getting these stepper motors out??

Also when switching the climate control it is only cold at 18 and the rest are all warm which is annoying, I have done a diagnostics on it and its coming up with

outside air sensor

inside air sensor

sunload sensor (not sure if this would be faulty because I did the test when it was in my garage.)

How can I find the other 2 sensors? and how can I test them?

Any help would be much appreciated, im sure with all the r33's around theres gota be someone whos had these probs aswell.

Link to comment
https://www.sau.com.au/forums/topic/181553-air-con-probs-r33/
Share on other sites
Stormchaser Enthusiast

Stormchaser

Posted
Posted

It seems that I have the same problem as you. (you can only turn the stereo up to cover it for so long lol)

Im really keen to find out what is involved in getting to the controls.

Somone here had an english workshop manual maybe there might be some help in there??

Jason.

rgr34 Proficient

rgr34

Posted
Posted (edited)

should be the same for r33 in my car the sensor in a little vent to the left of the steering wheel was disconnected which caused problem u described, could be any of the sensors thou....cold air at 18....anything more it went hot. also when u did the diagnostic did it tell u the temp the sensors were reading were they all similar? because my the faulty sensor in mine was given a really different reading......as for the noise i get that too is abit annoying!

Edited by rgr34
Richie33 Contributor

Richie33

Posted
Posted

I've found I can stop the clicking if I leave the air on face and feet all the time... then it doesn't click when I start the car. It will still click when I turn on the climate control or change the direction of the air, but by then the stereo is on. Bloody annoying but from what I understand its a whole days work removing the entire dash to fix it then put the dash back together. maybe I'll fix it one day... maybe

adam-__- Grand Master

adam-__-

Posted
Posted

The sound you guys/girls (if any) is the sound of the gears slipping on each other when you're trying to change the direction. The gears have probably just worn out over time. To change it, I think you have to take out the whole dash to get to the heater core.

Stormchaser Enthusiast

Stormchaser

Posted
Posted
The sound you guys/girls (if any) is the sound of the gears slipping on each other when you're trying to change the direction. The gears have probably just worn out over time. To change it, I think you have to take out the whole dash to get to the heater core.

I dont mind doing that as long as I know what Im doing once I get it off and can get the parts to replace them.

Not looking forward to pulling off dash and then having to put it back together if I cannot find out what the problem is or source parts.

adam-__- Grand Master

adam-__-

Posted
Posted

I'm not positive that your problem is the gears, but I heard it was common problem on the 33's heating system. I'm just giving you ideas mate. I don't want you to rip out the dash and found nothing wrong inside. Taking the dash out seems like a huge job.

seriesII Mentor

seriesII

Posted
Posted
I'm not positive that your problem is the gears, but I heard it was common problem on the 33's heating system. I'm just giving you ideas mate. I don't want you to rip out the dash and found nothing wrong inside. Taking the dash out seems like a huge job.

that sounds like my issue. the gears, mine only does it for 5 seconds when it turns on or off.. dash is easy. just need to find the gear thats clicking//:action-smiley-069:

klenn Contributor

klenn

Posted
  • Author
Posted
should be the same for r33 in my car the sensor in a little vent to the left of the steering wheel was disconnected which caused problem u described, could be any of the sensors thou....cold air at 18....anything more it went hot. also when u did the diagnostic did it tell u the temp the sensors were reading were they all similar? because my the faulty sensor in mine was given a really different reading......as for the noise i get that too is abit annoying!

Hey mate thanks for that, have the cover off and the only thing that leads to that vent is a pipe.... so does this mean the sensor is missing or is it in a different place?

rgr34 Proficient

rgr34

Posted
Posted

hey mate in my r34 there is the plastic pipe u describe and another plug for sensor connected in........ someone with a r33 needs to confirm its the same.......i would imagine it is thou....the plastic pipe connects to the back of the unit and the from memory the plug is on the side u see anything like that?

DK1983 Explorer

DK1983

Posted
Posted

same issue as above, but only for around 6 clicks, but then if you listen closely espcially in the mornings i can hear like "water running down the sink" sound coming from the engine bay???? could be related to the air con issue im not sure. wondering if anyone has heard a simular thing??

nizmokid Mentor

nizmokid

Posted
Posted

guys it it the motor on which switches the vent over, mine does the same thing but I have got a second hand motor and just have to find the time to be stuffed to pull the whole Dash , cluster ...pretty much everything aroundthe dash to get to the motor.

5-6 hour job I believe....I will get around to it some day......car is only driven on the weekends anyway!

klenn Contributor

klenn

Posted
  • Author
Posted
hey mate in my r34 there is the plastic pipe u describe and another plug for sensor connected in........ someone with a r33 needs to confirm its the same.......i would imagine it is thou....the plastic pipe connects to the back of the unit and the from memory the plug is on the side u see anything like that?

Hey thanks man yeah it would be good if someone can confirm if there is a sensor there because that must be the climate control problem if it is missing, seems abit werd tho because there are no wires there or anything.

cheers.

adam-__- Grand Master

adam-__-

Posted
Posted
guys it it the motor on which switches the vent over, mine does the same thing but I have got a second hand motor and just have to find the time to be stuffed to pull the whole Dash , cluster ...pretty much everything aroundthe dash to get to the motor.

5-6 hour job I believe....I will get around to it some day......car is only driven on the weekends anyway!

Some say that it'll take about 6 hours, some say that if you know what you're doing, it'll only take 1 hour. I think it's best to get someone who's taken out the dash before to help save some time.

siddr20 Grand Master

siddr20

Posted
Posted

Yes it does take 4-5 hours..

Its a big job taking the WHOLE dash out..

thats right, you gotta take everything off..

This guy had pics up here on how to take the dash out: http://gtr.ferni.net/misc/dash_removal/

BUt seems like the link isnt work anymore :(

"ferni"-- hmm that name sounds familar.. im pretty sure hes on this website..

hope he sees this

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • 25debt
      MAJOR FUEL ISSUES 25det neo r32

      By 25debt · Posted

      Hey to anyone that reads this, long time lurker first time posting, sorry if it’s been answered before but I’ve been looking for nearly a year now for answers. ive got a 25det neo in an r32 that works awesome when it works (made 500whp on 21psi) but works 45% of the time, 1st issue there’s a harness that runs under the passengers side front fender that my tire keeps rubbing through and one wire seems to power the fuel pump even though I’ve done the relay “mod” some people like to call it, and when it does rub through it kills the car, yes next time I’m with the car I want to take the fender off and try tuck the harness well out of the way but I’d also like to try and by pass this mysterious wire as well lol, also wouldn’t mind getting power from the alternator as I’ve read it supplies the pump with 13v ? But no idea where to run the power wire too. 2nd issue, when replacing my fuel pump and fuel hanger I managed to break the factory fuel level sender leaving me with no fuel gauge, I’d like to buy the fpg fuel level sender for r32/s13 but the plug it comes with confuses me, I’ve got a detschwerks x1 fuel hanger which has light + pump - level + pump + and a ground, I’m no auto sparky but I’m wondering if I can cut the plug off the fuel level sender and wire the negative to the pump negative and wire the positive to the level positive to get a fuel gauge back ?🥴 3rd and final issue, the reason I want a fuel gauge is because whenever it’s below half a tank, it fuel starves like crazy and runs like a bag of shit even without doing a pull or sloshing the fuel round in the tank, I’d also like to fix this but have no idea what’s causing it, I’ve got a dw420 and a dead head fuel setup meaning the fuel is regulated before it gets to the engine, my only theory is that the return line is to close to the pickup on the pump and when it’s at half a tank the return line is causing the pump to cavitate enough to cause fuel pressure issues, that or the pump isn’t low enough in the tank which I would find strange considering I can’t find a single thing online about it, also if ya wondering how I figured out it happens at half a tank without a fuel gauge, I waited until it started happening and went and filled up and the car took exactly 30 litres every time I tested it, if ya managed to read through this mess I appreciate that and any recommendations , cheers
    • joshuaho96
      Is r33 gtr steering wheel the same as the gtst?

      By joshuaho96 · Posted

      ChatGPT is trash and lies about things I would not expect it to lie about considering many things it's wrong about are very easily verified with google. The S3 R33 GTR shares its steering wheel with R33 GTSTs of the same production year. Part number is 48430-26U17. I'm guessing you have to get it from a car that came with HICAS though, the ER33 is 48430-26U18, but the HR33 diagrams note that part number is still leather vs 48430-26U13 which is not leather-wrapped. They all use the same airbags, so if you need another one you can get it off basically any same year R33 or Stagea.
    • Dose Pipe Sutututu
      Never ending fuel pump drama

      By Dose Pipe Sutututu · Posted

      I'm going to run hard lines front to back in the future. That should help dissipate a bit more heat. If not, a fuel cooler might be next 
    • MBS206
      rb25 Degreeing cams with hydraulic lifters?

      By MBS206 · Posted

      No. The mark is with respect to the cam rotation. None of those things have altered it. When stationary, the cam position stays in sync with the crank position. It doesn't matter if you moved the head 4 feet up. Hence, that mark needs to stay exactly where it is.  
    • Predator1
      Never ending fuel pump drama

      By Predator1 · Posted

      Toasty! I was around the same. Around 50 but with a fuel cooler. Got my tuner to dial down the pumps and its so much better.. i think last time I drove it was around 35-40 during summer. PWM makes a huge diff. I have the 1 PWM controller running my feeds.
×
×
  • Create New...