Jump to content
SAU Community

Air Con Probs R33

klenn

By klenn,
in General Maintenance

 Share

Recommended Posts

klenn Contributor

klenn

Posted
Posted

hi guys thort id try and pick your brains and see if anyone knows much about air con in these skylines.

when I change from the different settings from demister to feet it makes a click click clack noise from somewhere it sounds somewhere at the top of the dash, I have done a search and apparently it is the plastic cogs on the stepper motors, whats involved in getting these stepper motors out??

Also when switching the climate control it is only cold at 18 and the rest are all warm which is annoying, I have done a diagnostics on it and its coming up with

outside air sensor

inside air sensor

sunload sensor (not sure if this would be faulty because I did the test when it was in my garage.)

How can I find the other 2 sensors? and how can I test them?

Any help would be much appreciated, im sure with all the r33's around theres gota be someone whos had these probs aswell.

Link to comment
Share on other sites
Stormchaser Enthusiast

Stormchaser

Posted
Posted

It seems that I have the same problem as you. (you can only turn the stereo up to cover it for so long lol)

Im really keen to find out what is involved in getting to the controls.

Somone here had an english workshop manual maybe there might be some help in there??

Jason.

Link to comment
Share on other sites
rgr34 Proficient

rgr34

Posted
Posted (edited)

should be the same for r33 in my car the sensor in a little vent to the left of the steering wheel was disconnected which caused problem u described, could be any of the sensors thou....cold air at 18....anything more it went hot. also when u did the diagnostic did it tell u the temp the sensors were reading were they all similar? because my the faulty sensor in mine was given a really different reading......as for the noise i get that too is abit annoying!

Edited by rgr34
Link to comment
Share on other sites
skytemplar Apprentice

skytemplar

Posted
Posted

i'm having the same problem. where is the sunload sensor located? i've only found the inside sensor as descripted by rod. i've no idea if it's working not. how can you check the readings from them and if the sensors are working? thanks.

Link to comment
Share on other sites
Gazee Grand Master

Gazee

Posted
Posted

i also have the same problem, but mine only happens when i put the temp over 24-25, pretty weird sounding

i've tried kicking it a couple of times and it hasn't helped :)

Link to comment
Share on other sites
Richie33 Contributor

Richie33

Posted
Posted

I've found I can stop the clicking if I leave the air on face and feet all the time... then it doesn't click when I start the car. It will still click when I turn on the climate control or change the direction of the air, but by then the stereo is on. Bloody annoying but from what I understand its a whole days work removing the entire dash to fix it then put the dash back together. maybe I'll fix it one day... maybe

Link to comment
Share on other sites
adam-__- Grand Master

adam-__-

Posted
Posted

The sound you guys/girls (if any) is the sound of the gears slipping on each other when you're trying to change the direction. The gears have probably just worn out over time. To change it, I think you have to take out the whole dash to get to the heater core.

Link to comment
Share on other sites
Stormchaser Enthusiast

Stormchaser

Posted
Posted
The sound you guys/girls (if any) is the sound of the gears slipping on each other when you're trying to change the direction. The gears have probably just worn out over time. To change it, I think you have to take out the whole dash to get to the heater core.

I dont mind doing that as long as I know what Im doing once I get it off and can get the parts to replace them.

Not looking forward to pulling off dash and then having to put it back together if I cannot find out what the problem is or source parts.

Link to comment
Share on other sites
adam-__- Grand Master

adam-__-

Posted
Posted

I'm not positive that your problem is the gears, but I heard it was common problem on the 33's heating system. I'm just giving you ideas mate. I don't want you to rip out the dash and found nothing wrong inside. Taking the dash out seems like a huge job.

Link to comment
Share on other sites
seriesII Mentor

seriesII

Posted
Posted
I'm not positive that your problem is the gears, but I heard it was common problem on the 33's heating system. I'm just giving you ideas mate. I don't want you to rip out the dash and found nothing wrong inside. Taking the dash out seems like a huge job.

that sounds like my issue. the gears, mine only does it for 5 seconds when it turns on or off.. dash is easy. just need to find the gear thats clicking//:action-smiley-069:

Link to comment
Share on other sites
klenn Contributor

klenn

Posted
  • Author
Posted
should be the same for r33 in my car the sensor in a little vent to the left of the steering wheel was disconnected which caused problem u described, could be any of the sensors thou....cold air at 18....anything more it went hot. also when u did the diagnostic did it tell u the temp the sensors were reading were they all similar? because my the faulty sensor in mine was given a really different reading......as for the noise i get that too is abit annoying!

Hey mate thanks for that, have the cover off and the only thing that leads to that vent is a pipe.... so does this mean the sensor is missing or is it in a different place?

Link to comment
Share on other sites
rgr34 Proficient

rgr34

Posted
Posted

hey mate in my r34 there is the plastic pipe u describe and another plug for sensor connected in........ someone with a r33 needs to confirm its the same.......i would imagine it is thou....the plastic pipe connects to the back of the unit and the from memory the plug is on the side u see anything like that?

Link to comment
Share on other sites
DK1983 Explorer

DK1983

Posted
Posted

same issue as above, but only for around 6 clicks, but then if you listen closely espcially in the mornings i can hear like "water running down the sink" sound coming from the engine bay???? could be related to the air con issue im not sure. wondering if anyone has heard a simular thing??

Link to comment
Share on other sites
nizmokid Mentor

nizmokid

Posted
Posted

guys it it the motor on which switches the vent over, mine does the same thing but I have got a second hand motor and just have to find the time to be stuffed to pull the whole Dash , cluster ...pretty much everything aroundthe dash to get to the motor.

5-6 hour job I believe....I will get around to it some day......car is only driven on the weekends anyway!

Link to comment
Share on other sites
klenn Contributor

klenn

Posted
  • Author
Posted
hey mate in my r34 there is the plastic pipe u describe and another plug for sensor connected in........ someone with a r33 needs to confirm its the same.......i would imagine it is thou....the plastic pipe connects to the back of the unit and the from memory the plug is on the side u see anything like that?

Hey thanks man yeah it would be good if someone can confirm if there is a sensor there because that must be the climate control problem if it is missing, seems abit werd tho because there are no wires there or anything.

cheers.

Link to comment
Share on other sites
adam-__- Grand Master

adam-__-

Posted
Posted
guys it it the motor on which switches the vent over, mine does the same thing but I have got a second hand motor and just have to find the time to be stuffed to pull the whole Dash , cluster ...pretty much everything aroundthe dash to get to the motor.

5-6 hour job I believe....I will get around to it some day......car is only driven on the weekends anyway!

Some say that it'll take about 6 hours, some say that if you know what you're doing, it'll only take 1 hour. I think it's best to get someone who's taken out the dash before to help save some time.

Link to comment
Share on other sites
siddr20 Grand Master

siddr20

Posted
Posted

Yes it does take 4-5 hours..

Its a big job taking the WHOLE dash out..

thats right, you gotta take everything off..

This guy had pics up here on how to take the dash out: http://gtr.ferni.net/misc/dash_removal/

BUt seems like the link isnt work anymore :(

"ferni"-- hmm that name sounds familar.. im pretty sure hes on this website..

hope he sees this

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Count Grantleyish
      Vic Wasteland Thread - 15.0

      By Count Grantleyish · Posted

      People still have Skylines? I thought they're non-existent now. 
    • pogman
      George's R33 GTST build

      By pogman · Posted

      Harness update time have had great fun and learnt so much already so far with this project. I started off making both the ignition and injector sub harnesses in the hope any mistakes i made here aren't as hard to undo and learn from as the main harness.  A cool comparison of the old harness using presumably TXL wire and the new which is using Tezel. Also opted to use DTM plugs to keep the whole setup as neat and tidy as possible and tucked the wiring under the coil bracket to try and keep it all from sticking out too much. Although the injector harness, I'm not overly happy with as I'm still using the rubber boots that are supplied with the type of plugs it just looks ugly and sticks out like a sore thumb with the white identifiers so a slight redesign may be done.   Then it was main harness time and most importantly trying to route it nice and away from the heat it will use the OEM heater hose routing which is no longer present to keep the harness up high and secure. it's amazing how much smaller this harness is able to be compared to the old one. plugged everything into the emtron and with the help of the tuner again attempted to start it up and instantly fired up and running smoothly on all 6 which was a big shock to myself. So still some routing and adjusting to be done for the final fit up and installing a knock sensor harness plug which is in the post all has gone surprisingly well.     The old harness for shits and giggles.
    • GTSBoy
      Hello Everyone

      By GTSBoy · Posted

      They do that at random every now and then, with almost no detectable cause. Mine has done it a couple of times (over 25 years!!). Never worked out why.
    • Triple OG
      Hello Everyone

      By Triple OG · Posted

      I don't post on here and have been lurking for some time now. Many of the topics have helped me out more times than i can count. I was racing yesterday (11/9) and blew a front right CV shaft. I have spares so I popped a new one in. A thread i read previously said to check the engine mounts if you blow a front CV. Upon inspection, the front right mount was completely separated from the upper plate. This discovery saved me time and money, because i would have blown another CV if i went back out. Just wanted to thank you guys and wish everyone luck with with their builds. (Now if we could only come up with a solution for my power steering belt flying off after hitting the rev limiter, lol)
    • r32-25t
      GReddy Injector Help!

      By r32-25t · Posted

      Either way he still need those style of spacer to go into the manifold because the photo he currently has is not going to work 
×
×
  • Create New...