Jump to content
SAU Community

Recommended Posts

Hey guys

My r34 has been fooling me around a bit for past 2 weeks or so. First it started off misfiring after about 4000 revs. It was like that for a week or so and then the other night, it was misfiring right after 2000 revs and was barely driveable. In fact, I had trouble starting it then left it for about 10 mins and barely was able to start it and take it home.

Can anyone provide some advice so I know what to look for? Is it the coilpacks? Maybe spark-plugs (never been changed)? AFM? Crank angle sensor? anything else possibly?

Thanks guys and all feedback is much appreciated as I need to know what it could be as my mechanic mate is not really too familiar with lines.

My cousin had the same problem on one of his car's, Toyota Aristo.

We changed the plugs and it was ok, but still miss firing, on the way to the petrol station the fuel pump actually died.

Do your fuel pump prime at all? Fuel pump failure is generally caused due to old age, or running the petrol level really low, below 1/4 tank usually.

Check if the fuel pump primes when you turn the ignition, if that doesn't work then its your fuel pump.

If it does actually prime, then it could be your spark plugs, or a number of things such as your AFM, blocked injectors coilpacks etc..

Hope that helps.

Thanks,

Abu

have u in any way screwed around with ur BOV?

nope... i blocked the vacuum line from bov over a year ago (to flutter) for a period of one day and then set it back and have never had any problems with the car until just week or so ago.

hmmmmm any1 got any more concrete suggestions?

Can anyone provide some advice so I know what to look for? Is it the coilpacks? Maybe spark-plugs (never been changed)? AFM? Crank angle sensor? anything else possibly?

I'd be looking in the following order

1, coil packs and/or power transistor

2, spark plugs

3, afm

4, cas

I've had all of the above problems on every nissan i've owned - to me it sounds more like a coil pack and/or power transistor than an afm problem (but just in case, check for filter remnants or gunk on the afm and give it a good electrical contact clean for safe measure.

If it's the cas, your timing will change frequently, check with a timing light. Or if you're inclined take the cas out and check for wear on the spindle.

Edited by Howie

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...