R34gtt Firewall Entry?

[silverr34gtt]

Hi all.

Im trying to find a solution to feeding wires from engine bay into cabin on an r34 gtt coupe. has anyone done it? my searches have found a few ideas but none have worked for me. any ideas would be appreciated.

[666DAN]

Near the factory boost sensor on the drivers side, out behind the fusebox on the kick panel. Take the plastic guard liner out to make things easier.

[silverr34gtt]

Ok, your response was a little confusing, but i did find a grommit/ plug near the drivers door wire entry. that is big enough to get the wire and hose through.

thanks for your help. If anyone else has a photo or any more ways to get wires into r34 gtt cabin through firewall please post.

[Advent34]

take your inner guards off the driver hand side. there's a big rubber protector there, feed it though that.

[rgr34]

u can feed a few wires through a rubber grommet which the bonnet release cable goes through....it comes out a small hole near the corner drivers firewall.... when installing boost gauge i fed a steel wire through first then attached wiring/tubing to that. to get to it the kick panel will need to be removed.