Jump to content
SAU Community

Recommended Posts

I want to install a 38mm external wastegate and screamer pipe on my GTS25t on the standard extractors. I have looked around on these forums and havnt been able to find any guides an i was wondering if anybody knew where there was one on these forums or anywhere else? Any help would be much appreciated, cheers.

Edited by jUsT-dRiFt-iT
Dont waste your time unless you absolutly need it. And as for a screemer - im guessing you dont need your car on the road for too long.. they sound shiet on 25's any way

Hey i have one and it sounds sweet as, but i dont drive it on the street much.

Each there own. :)

why?

You wont be able to do this at home unless you have a die grinder, an oxy set and a tig welder

I have all those things as my dad is an engineer but just need instructions on hooking up all the lines, blocking/removing the internal etc..so nobody knows where there is any guides on this forum?

Edited by jUsT-dRiFt-iT
Hey i have one and it sounds sweet as, but i dont drive it on the street much.

Each there own. :)

Yeah i have heard many on 25t's an i rekn they sound nice as!

no difference in the sound of a screamer...atleast none i can tell from a 20, 25 or 26 even on the rb30dets... Ive had ones on both 25 and 25/30's and ive heard em on 26/30's. unless my ears are playing up i reckon they all sound the same. Like a huge arse exhaust leak, but tough on the race track, its just lame when they spit flames and melt the steering rack boots haha.

lol someone wants to be an attention whore.

Just put a Vent to atmosphere BOV in it, some neons, and a big sign on top that flashes and says "cops, PLEASE throw the book at me"

no difference in the sound of a screamer...atleast none i can tell from a 20, 25 or 26 even on the rb30dets... Ive had ones on both 25 and 25/30's and ive heard em on 26/30's. unless my ears are playing up i reckon they all sound the same. Like a huge arse exhaust leak, but tough on the race track, its just lame when they spit flames and melt the steering rack boots haha.

Every screamer will sound different depending on

Manifold

Gate size

Screamer exit pipe size/angle/position etc

Gate position on the manifold

etc etc.

But on a stocker turbo - pointless, even with the stock manifold i dont think there is a lot to gain

You need to disable your internal gate you could weld it shut or have something hold it shut from outside where its hooked up to the actuator. Tehn you to find a location in front of the turbo entry where exhaust gas can be made to bypass the turbo (hope you're good at welding cast iron as its nearly impossible) bolt on your external gate and screamer pipe, run manifold pressure to it and there you go!

man you're going to be going to a lot of trouble. it would be easier to buy an aftermarket manifold with the facility for an external gate and save yourself some brain damage.

hope this helped

Matt.

lol someone wants to be an attention whore.

Just put a Vent to atmosphere BOV in it, some neons, and a big sign on top that flashes and says "cops, PLEASE throw the book at me"

FTP

You need to disable your internal gate you could weld it shut or have something hold it shut from outside where its hooked up to the actuator. Tehn you to find a location in front of the turbo entry where exhaust gas can be made to bypass the turbo (hope you're good at welding cast iron as its nearly impossible) bolt on your external gate and screamer pipe, run manifold pressure to it and there you go!

man you're going to be going to a lot of trouble. it would be easier to buy an aftermarket manifold with the facility for an external gate and save yourself some brain damage.

hope this helped

Matt.

Yeah i think i mite just get some extractors ay it seems like it would be alot easier. If i get extractors with a place to bolt on the external what would i have to do then? Would i still have to find a place in front of the turbo entry to bypass the exhaust gas from the turbo or would the extractors take care of that?

Cheers.

And hopefully the person that steals your car is screaming "FTP" out the window as he drives off with it.

Then you might get some respect when you actually need them, unfortunately they wont say "FHNH?" (fck who now huh?) as they are forced to respond to even the biggest morons

And hopefully the person that steals your car is screaming "FTP" out the window as he drives off with it.

Then you might get some respect when you actually need them, unfortunately they wont say "FHNH?" (fck who now huh?) as they are forced to respond to even the biggest morons

I have needed them on a couple of occacions and every time they have ended up turning everyting on me and my mates instead of the people that have auctually started the sh*t..the New Zealand law is pathetic, it protects the criminal more than it does the victim..and this is now why i believe FTP as i have only had bad experiences with them..

Edited by jUsT-dRiFt-iT

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Price seems pretty good to me. Also seems a hell of a lot cheaper then buying another vehicle that only ever gets used for towing.  I'm a long way from you mate, I'm a couple of hours out of Brizzy. 
    • New [400]Z, they're available in manual and you don't have to worry about parts scarcity. 
    • Just planning to have the wiring neat and hide as much as possible.
    • The sodium acetate, mixed with citric acid, doesn't actually buffer each other. Interestingly though, if you used Sodium Acetate, and acetic acid, THAT becomes a buffer solution. Additionally, a weak acid that can attack a metal, is still a weak acid that can attack a metal. If you don't neutralise it, and wash it off, it's going to be able to keep attacking. It works the same way when battery acid dries, get that stuff somewhere, and then it gets wet, and off it goes again breaking things down. There's a reason why people prefer a weak acid, and it's because they want TIME to be able to be on their side. IE, DIY guys are happy to leave some mild steel in vinegar for 24 hours to get mill scale off. However, if you want to do it chemically in industry, you grab the muriatic acid. If you want to do it quicker at home, go for the acetic acid if you don't want muriatic around. At the end of the day, look at the above thumbnail, as it proves what I said in the earlier post, you can clean that fuel tank up all you want with the solution, but the rust that has now been removed was once the metal of the fuel tank. So how thin in spots is your fuel tank getting? If the magazine on the left, is the actual same magazine as on the right, you'll notice it even introduces more holes... Well, rust removal in general actually does that. The fuel tank isn't very thick. So, I'll state again, look to replace the tank, replace the fuel hanger, and pump, work out how the rust and shit is making it past the fuel filter, and getting into the injectors. That is the real problem. If the fuel filter were doing its job, the injectors wouldn't be blocked.
    • Despite having minimal clothing because of the hot weather right now, I did have rubber gloves and safety glasses on just in-case for most of the time. Yes, I was scrubbing with my gloves on before, but brushing with a brush removes the remaining rust. To neutralize, I was thinking distilled water and baking soda, or do you think that would be overkill?
×
×
  • Create New...