Throttle Body Adaptor

[teazn_r33]

ppl im chasing a throttle boby adaptor plate so i can put my standard throttle body on my greddy plenum

cau you please help me on where to get one or one like it ??

[ix9]

Right here sir!

http://purchasenet.com.au/shopping/stock-t...tor-p-1371.html

[STATUS]

any autobarn part number 13920450 about $120 ish or you could buy the copy version above (from memory the copy does not come with the silicon joiner/adapter and high tensile bolts which means you end up at the same cost anyway)

[r33_racer]

why not just make one?

Made mine out of 10mm ally plate, bored out the guts to suit and drilled the relevent holes of which two are tapped from memory. I think there are 6 holes in total, two pick up the originals, two into the tapped holes and the other two pick up the last two q45 ones in the actual manifold.

Cost me nothing, just time. A piece of ally plate wont cost bugger all and if you have the tools to do it well why not give it a go?

Though i spose 90bux isnt that much if your abit slack.

[ix9]

or you could buy the copy version above (from memory the copy does not come with the silicon joiner/adapter and high tensile bolts which means you end up at the same cost anyway)

$9 of gasket maker and you're done.

And I'd say you wouldn't need high tensile bolts for it's application, its not getting that hot anyway.

[STATUS]

$9 of gasket maker and you're done.

And I'd say you wouldn't need high tensile bolts for it's application, its not getting that hot anyway.

gasket maker? for what?

[teazn_r33]

yer not quite sure

anyways i went to autobarn 139 i might as well buy a bigger throttle body