How-to: Greddy-style Plenum Install

[H@ME]

hey guys here is one of the pics in the tutorial..you can see the blue plug lying there @ the back...just wanna know where it goes. i already have the intake on. see above. any help is muchly appreciated. Hame

[H@ME]

all good guys found it on the undersie of the plenumn just tricky to see all good now thankz.

[johnbarry88]

think that one goes to the heater exchange unit under the plenum...

[dkslong]

thanks man ive been looking on how to actually do this ur the best

[skymugs]

has anyone actually fit top feed injectors to this manifold..? i did and there leaking. i used standard rb20 seals.. any idea's

i seen collars u can get to put in there ive seen ppl use on sr20's.. cant find em anywhere though

[Jum]

How do you get at the bolts on the bottom row in this pic? Some sort of swivel ratchet?

I cant get at them to undo em

[Craved]

i think from memory a straight bar extension should allow you to get to them from underneath.

[skymugs]

i used a 1/4 drive rachet wit extention underneath lol

[Bliksem]

Yup another for extension and underneath

[Jum]

Cheers guys, managed to get it off!

Should I replace the gaskets when putting it all back together?

[WilYawn]

Yes. At least the gasket between plenum and head, but I replaced all of them for peace of mind

Edited December 3, 2008 by WilYawn

[Jum]

ok cool, and is nissan the best/only place to get them?

oh and use locktite on all the bolts?

(sorry, not too familiar with all the basics )

Edited December 3, 2008 by Jum

[WilYawn]

Great thread, answered all my questions regarding this install.

Started her up yesterday, idles smooth as silk

Can't wait to try her on the road, f**king winter here now...

[Fat_Tony]

Great thread, answered all my questions regarding this install.

Started her up yesterday, idles smooth as silk

Can't wait to try her on the road, f**king winter here now...

Dude, looks like you hooked up your coolant bleed valve. Where did all the hoses go?

[Bliksem]

You block off the coolant bleed. Most of the hoses are covered in this thread have a read from page 1

Edited December 21, 2008 by MintR33

[Fat_Tony]

You block off the coolant bleed. Most of the hoses are covered in this thread have a read from page 1

Sydney Kid said it wasn't a good idea in one of his posts. I'd like to keep as many of the factory bits as possible.

But if I can block it off, it'll be blocked off.

[WilYawn]

Dude, looks like you hooked up your coolant bleed valve. Where did all the hoses go?

I took a good look where the water hoses for the bleed valve goes, before i took the old plenum off.

Didn't like the idea of not being able to bleed the air out of the cooling system

[Turbotonic]

xllent work

[WilYawn]

This way you don't have to block off any pipes. Just remember to mount the bleed valve so its the highest spot on the cooling system.

Edited December 23, 2008 by WilYawn

[89CAL]

Why hasnt this been stickied yet

lots of good information, should be a sticky in either this thread or the DIY/Tutorials thread really

Appreciate the guide, will come in handy when it comes time to put mine on