How-to: Greddy-style Plenum Install

[89CAL]

What exactly do you want to know? Someone might be able to give you quick answers + more specific photos of what your chasing

[55psi]

Anyone having issues viewing the OP pictures of the install???!

[GTSBoy]

What? You're surprised that the photos linked to a 7 year old thread don't work any more?

[55psi]

Well the pictures worked a few weeks ago! And I need the guide now to install my plenum, but no pics!

It WAS the only decent guide on the net.

[toddlls]

Have used this guide to fit a Greddy Plenum to a RB25det Neo in my R32Gtst.--works a treat

All is very similar but you will need to make an adaptor place to fit the Neo AAC/cold start valve.

Also the R32 Clutch master will need to be changed over to a R33 S2 unit as the R32 Clutch cylinder sticks out too far. The R33 S2 unit has a bit more inside the car than the R32 unit hence why it seems shorter when viewed on Firewall.

Used a R33 S2 throttlebody also.

I have used the top feed injectors off the neo also & a twinfeed fuel rail so new brackets had to be fabricated-used Aluminum 3mm angle which worked a treat too. Holes are offset but everything is Rock solid with no movement.

Cheers ix9, matey you rock-this is 1 hell of a thread & 6-7yrs after the time you did it its still helping people like me

Todd

[Strick.]

OP you still around, would love to see the pics again!

[95_ECR33]

im going to do this install this coming weekend and went searching for another how to with photos in it. stumbled across this http://rb26.net/index.php/guides/3-installing-a-greddy-style-plenum-into-a-rb25det which appears to be exactly the same as this one

[Strick.]

Have been using that one too. Post up how you go or any tips/pics etc. im half way through mine

[MathewZ]

Can op please update thread. as no pictures work anymore.

[B-rice]

Two posts up follow that link

[sully528]

hey mate! having trouble viewing the pictures! they're just coming up as icons??

[Jordy32]

hey mate! having trouble viewing the pictures! they're just coming up as icons??

http://rb26.net/index.php/guides/3-installing-a-greddy-style-plenum-into-a-rb25det

few posts up

[AngryRB]

Would it really give 40% better throttle response? seems to contradict the view of the stock runners being best for response then.

[Ben C34]

Would it really give 40% better throttle response? seems to contradict the view of the stock runners being best for response then.

I seriously doubt it.

Stock runners are best for torque.

[lcxu105]

About to do this mod. But can't see any of the photos at the start of the thread. Can anyone put them back up. Thanks.

[cav33r]

Click on the link a few post up ^^

[lcxu105]

When doing this change over. What have people done for the tps. This is the problem I have. R34 tps won't fit the throttle bodie supplied with the manifold.you can see the difference.

[cav33r]

Get a adaptor plate and put the original throttle body back on. Not going to make a huge difference going to a 80 or 90mm tb. Plus you also have better throttle control down low with the std

[lcxu105]

My std one contains the trackion control

[lcxu105]

Also has anyone got a photo of how they hooked up the lines to the r34 neo aac valve?