Jump to content
SAU Community

Recommended Posts

There well supported but a tad basic for street R33(Stinger version) and waste spark etc.You would need the top model to do it right so best to look for a plugin like PFC or Wolf etc. You need Idle speed,VVT,, boost, Aircon request,and closed loop minimum for a nice road car, Stinger uses it outputs for tacho,fuel pump control etc leaving you short on outputs.Ive seen fuel pumps hard wired cause theres no outputs left so if going EMS look for their topend model,and as your saying the price is cheap i think your talking Stinger.The real upside it EMS are fantastic ppl to deal with.

Link to comment
https://www.sau.com.au/forums/topic/181842-ems-ecus/#findComment-3302894
Share on other sites

Thanks NIB. I think in the end I may go Wolf, just a shame the dashes are not availble until they find another supplier. IMO PFC's are not really a good choice considering what they are and feature for the prices people are asking, you need to run Z32's with them which is an additional cost and nothings guaranteed because its all 2nd hand now. In comparision (for cost) there are many better choices, the only thing they have going for them is the support for tuning.

Anyway my intake/turbo setup is..

HKS GT2530

SARD BOV

3" Turbo back exhaust (inc stainless steel dump/front)

Hi flo cat

Pod

With an ECU i suppose i should get around 300rwhp?

Link to comment
https://www.sau.com.au/forums/topic/181842-ems-ecus/#findComment-3304298
Share on other sites

will be putting one of these in my 32 very soon spoke to a mechanic who tunes these all day everyday he was telling me he tuned a 32 rb20 only mods he had was pod filter after market intercooler and 3'' cat back exhaust and the thing pulled 197rwks on 10psi will let yas know what mine pulls out when i get it done

Link to comment
https://www.sau.com.au/forums/topic/181842-ems-ecus/#findComment-3305246
Share on other sites

will be putting one of these in my 32 very soon spoke to a mechanic who tunes these all day everyday he was telling me he tuned a 32 rb20 only mods he had was pod filter after market intercooler and 3'' cat back exhaust and the thing pulled 197rwks on 10psi will let yas know what mine pulls out when i get it done

I find that very hard to believe.. must have been a very generous dyno..

Link to comment
https://www.sau.com.au/forums/topic/181842-ems-ecus/#findComment-3305471
Share on other sites

will be putting one of these in my 32 very soon spoke to a mechanic who tunes these all day everyday he was telling me he tuned a 32 rb20 only mods he had was pod filter after market intercooler and 3'' cat back exhaust and the thing pulled 197rwks on 10psi will let yas know what mine pulls out when i get it done

Will need a good Turbo for that.

Link to comment
https://www.sau.com.au/forums/topic/181842-ems-ecus/#findComment-3305930
Share on other sites

stinger is a great little ecu for a basic setup converting a car on a carby to an efi setup.

For a nissan it's not a good move.

how come??

my car has made over 400 hp@ 27psi on NIB's dyno with the stinger. stock internaled rb20...

my best mate converted a series2 rb25 into his r32 with gt30 and stinger and that made close on 400 aswell

there an awesome bang for buck ecu, u dont need to wire it up as a standalone it can be pickybacked aswell meaning you keep a few outputs.

they have just realesed a whole new range aswell which would be worth looking into

Link to comment
https://www.sau.com.au/forums/topic/181842-ems-ecus/#findComment-3306052
Share on other sites

how come??

my car has made over 400 hp@ 27psi on NIB's dyno with the stinger. stock internaled rb20...

my best mate converted a series2 rb25 into his r32 with gt30 and stinger and that made close on 400 aswell

there an awesome bang for buck ecu, u dont need to wire it up as a standalone it can be pickybacked aswell meaning you keep a few outputs.

they have just realesed a whole new range aswell which would be worth looking into

I like the stinger myself , I had one not long ago running a turbo efi converted A14 in a datsun 1200 ute.

Power numbers themselves aren't a measure of how good an ecu is, the setup is a complete pain in the ass compared to things on the market that have plug in abillity to suit the RB nissans. But If you like mucking around then why not?

hows the fuel ecconomy on yours?

Link to comment
https://www.sau.com.au/forums/topic/181842-ems-ecus/#findComment-3306293
Share on other sites

I like the stinger myself , I had one not long ago running a turbo efi converted A14 in a datsun 1200 ute.

Power numbers themselves aren't a measure of how good an ecu is, the setup is a complete pain in the ass compared to things on the market that have plug in abillity to suit the RB nissans. But If you like mucking around then why not?

hows the fuel ecconomy on yours?

yeah true i can understand the wiring up as being an issue to some, but it made life a hell of alot easier to me (managed to ditch most of it from the exhaust side)

agreed on the power thing but 27psi on the internal map sensor... no need to upgrade to bigger sensor unlike some of the more expensive ecu's on the market.

fuel ecconomy is like any hard tuned car,I see 350km to a tank with light driving and with full throttle hill runs type driving (on off on off) ive seen up to 400 a tank :rolleyes:

Link to comment
https://www.sau.com.au/forums/topic/181842-ems-ecus/#findComment-3306403
Share on other sites

will be putting one of these in my 32 very soon spoke to a mechanic who tunes these all day everyday he was telling me he tuned a 32 rb20 only mods he had was pod filter after market intercooler and 3'' cat back exhaust and the thing pulled 197rwks on 10psi will let yas know what mine pulls out when i get it done

You must be kidding. Is that even possible with such mods? I find it hard to believe man. As bubba said, must be a very generous dyno.

Link to comment
https://www.sau.com.au/forums/topic/181842-ems-ecus/#findComment-3306618
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Looking at finally painting and installing my R32 GTR wing I bought back in 2018. I got two quotes: Quote 1: $880 includes: wing, spare boot, holes welded up prep/paint. Pro: full boot with wing AND hole-less boot with lip i can swap between Con: $$  Quote 2: $330 wing only. Pro: cheaper Con: lose my (relatively) rare no holes sedan boot Also to consider I do plan on painting my whole car at some point "soon" (been saying that since 2018) Anyway Enjoy these All Japan Day 2025 pictures of my 4 door, still rocking the Calsonic Livery! Rolling in Interior shot Matching Peer Pressure Racing overalls are pretty cute ngl. This year was a hard 1990 cut so I got to be over with all the older cool stuff Next to arguably the best car there. A mighty S-Cargo
    • I personally would run 2x from the cam covers into the catch can, 1x sump vent to catch can (would mount this at a low point of the catch can, so it can also act as a drain). I would see if you can run a -12AN down there to improve venting and also draining. The head drain thing, just drain that back to the sump on the other side. Catch can to be vented, unless you plumb or back to the intake.
    • Yeah the head "drain" is rather a sump/crank case vent. My catch can stopped filling up after venting the sump to the catch can. I have 4x fittings in mine, which is about 5Ls. 2x cam, 1x sump vent/catch can drain, 1x fitting back to the intake and a massive breather which can be blocked so it's a fully sealed system.
    • Ok glad you clarified on the frenchy’s options , I was worried about if my oem hoses would fit the new compressor or not if I just bought the bracket/compressor kit ,  didn’t realize they also sold a larger full conversion kit. Hmm may just go oem in that case then to make it easy only because I plan to sell this car to upgrade to a 32 GTR or 34 GTT.
    • Right, here's a video of the basic operation at least.  This is what you can expect day to day when you turn the car on and it boots from standby.  The only thing from a media point of view I haven't gotten working is for it to autoplay plexamp when it turns on from standby (it works from cold boot) but that's more of a plexamp problem as it will autoplay other music players.  Also attached is my one stray cable.  It's part of the screen's wiring adapters but there's just nowhere for it to go in my car.  I've just now done a bit of research and found a matching port on a 2010-2014 head unit with BOSE.  Mine has no BOSE so that's that case pretty much closed I think.  Plugging in the Infiniti AC panel basically did nothing for me, so that's a dead end as well.  Next port of call is to mess with this CANBUS module and see what I can find from it.  I found this resource containing the DBC files for a 2010+ G37 : https://github.com/icecube45/Dash_InfinitiG37/blob/master/InfinitiG37.dbc I'll now have something to go from when I try to extract my CANBUS data so I can see if the HVAC Mode, Fan Speed, Temperature, etc. match and also the gear shifter position.  It's a pretty big assumption that it's just mismatched CAN signals but considering all the devices in the CAN network are talking to each other (AC can be fully adjusted just with no info on screen) it might be a safe one.  I will report back WhatsApp Video 2025-02-26 at 12.49.10.mp4
×
×
  • Create New...