Jump to content
SAU Community

Recommended Posts

is it possible??

ive seen some makes like ferrari lamborghini on the raws lists but i dont see and BMW or Merc..

I wonder how hard it would be to set up a business importing them into australia?

Link to comment
Share on other sites

raws doesn't descriminate based on country of manufacture. so it's exactly the same rules as importing japanese cars. or russian cars. or mexican cars. :P

an import is an import. and there are places that bring in some euro cars but the typical euro car buyer doesn't want a second hand imported car with no known history.

Link to comment
Share on other sites

I always thought because Lambo and Fezz were both imported in small numbers they have always been imported and complied under the low volume scheme by the Australian distrubutors?

Link to comment
Share on other sites

LHD would be the most common problem with the coolest of euro cars also.

RHD examples of all modern euros except maybe for porsche are easily accessible here in japan..they are plentiful.

i get the sneaking suspicion only models made prior to 1989 are eligible for import approval..

Link to comment
Share on other sites

Yeah right I didn't think Japan got much RHD euro stuff, I thought it was mainly LHD.

For things people would want to buy like BMW M or Benz AMG ect all come out in Australia new so would be excluded from SEVS.

Link to comment
Share on other sites

RHD examples of all modern euros except maybe for porsche are easily accessible here in japan..they are plentiful.

i get the sneaking suspicion only models made prior to 1989 are eligible for import approval..

whats the average price for a Ferrari 360 in RHD? i could only find LHD examples. from what i've found the LHD stuff goes for around $150k-$250k still cheap for a 360

Link to comment
Share on other sites

you're thinking about this all wrong. again, DOTARS doesn't care whether a care is euro, jap-o, hindi, pakistani whatever. the rules apply the same to any manufacturer.

they are all listed somewhere here but basically you cannot import a vehicle if the same or very similar model was sold here in full volume. if the model you want to import was not sold in full volume then sure you can import it providing you can have it added to the SEVS register. To be added to the SEVS register there are certain requirements it must meet (be unique, performance level, equipment level, magazine featured etc). Then to comply it you must be a RAW or get a RAW to do it for you.

again, it's nothing to do with 1989 etc. There are 3 main ways to import any car into australia (again doesn't matter where from). Personal import. 1988 and earlier model cars and lastly SEVS.

Link to comment
Share on other sites

you're thinking about this all wrong. again, DOTARS doesn't care whether a care is euro, jap-o, hindi, pakistani whatever. the rules apply the same to any manufacturer.

they are all listed somewhere here but basically you cannot import a vehicle if the same or very similar model was sold here in full volume. if the model you want to import was not sold in full volume then sure you can import it providing you can have it added to the SEVS register. To be added to the SEVS register there are certain requirements it must meet (be unique, performance level, equipment level, magazine featured etc). Then to comply it you must be a RAW or get a RAW to do it for you.

again, it's nothing to do with 1989 etc. There are 3 main ways to import any car into australia (again doesn't matter where from). Personal import. 1988 and earlier model cars and lastly SEVS.

i understood the 3 methods. obviously one of the ways im going to do it is to have a private import but starting a business is also on the list of things to do.

Having a car added to the sevs register doesnt involve anything like smashing the car to prove its safety, does it?

Link to comment
Share on other sites

I think you need some reading time on DOTARS website. it will guide you through the process. :action-smiley-069:http://www.dotars.gov.au/

just remember any model of car that was sold here in full volume cannot be added to the SEVS low volume register. so forget 3 series BMW, 5 series BMW, CLK mercs, SLK mercs, etc etc.

ferrari's and lamborghinis are already on the SEVS register as this is how the manufacturers chose to import them into AUS.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Much less twat-tastic. CF wheels are too garish for civilised use.
    • From there, as the manual says....assembly is the reverse of disassembly, no tricks worth mentioning Much better (for me)
    • In my case, the standard wheel I had was in good condition but the buttons had more wear, so I swapped them across from the original wheel from the car. The plastic rear cover is held on by 4 tabs, and once the wiring is removed you can get access to 2 screws on each side the hold the buttons in From there I just swapped the wiring over. What was interesting is the standard style wheel is 2.0kg but the carbon fibre one is 50% heavier at 2.9kg. It even has a weight inside the wheel at the top to make up for some sort of imbalance in the design. weird
    • Once the airbag is off, to remove the steering wheel.... Undo the 2 plugs into the clock spring, and the horn connector from it's clip. Hit the 19mm nut with a rattle gun (preferably) or if you don't' have one, you probably want an assistant to hold the wheel in place while you use a breaker bar to undo the nut Then, screw the nut back on 3 turns, and pull the wheel sharply towards you. If that doesn't work hit it medium force with a rubber mallet on either side, or possible behind if you can get there. If that all fails (it shouldn't!) you might need a steering wheel puller
    • So, to next task....the carbon fibre steering wheel was either an expensive factory option or a chinesium special. Either way, I don't like either the flat bottom or thick ring style, so it had to go So...to remove the steering wheel.... First, disconnect battery negative and stomp on the brake pedal for a few seconds. Then, remove the small circular covers on each side of the wheel's rear surround to uncover the airbag clips. You need to push something like a flat bladed screw driver through, to push the steel clip inwards and pull the side of the airbag forward. Once you've done the easy side, same on the centre console side. You can see the tab you are shooting for circled in red Then, disconnect the horn spade connector and for the yellow airbag plug you need to get something small under the black locking tab to pop it out, then the connector releases......airbag is off  
×
×
  • Create New...