Jump to content
SAU Community

Recommended Posts

Item: Nissan Skyline R32 GTR

Location: Tweed Heads

Website:

Item Condition: Good

Reason for Selling: Buying 4x4

Price and Payment Conditions: $23000 ono

Extra Info: 17" BBS rims, 4 brand new tyres, full 3' exhuast system, N1 turbos, power FC tuned by P.I.T.S to 403 HP atw, HKS intercooler and pod filters, remote oil filter and oil cooler Cusco half cage, koni adjustable shocks, Hicas lock bar, many susp bushes replaced. Engineers report for all mods done. All fluids changed recently. 11 months rego, New RDA slotted rotors + more.

Pictures:

Contact Details: 0427444495

post-23279-1187851363_thumb.jpg

post-23279-1187851529_thumb.jpg

post-23279-1188111457_thumb.jpg

post-23279-1188111686_thumb.jpg

post-23279-1188112012_thumb.jpg

post-23279-1188112222_thumb.jpg

post-23279-1188112469_thumb.jpg

post-23279-1188112658_thumb.jpg

post-23279-1188112857_thumb.jpg

Edited by JSWR32
Link to comment
https://www.sau.com.au/forums/topic/182071-r32-gtr/
Share on other sites

Sorry for the slightly off topic question but it will impact my decision on whether to enquire about the car. I have seen a couple R32 GTR's on here with the rear lock bar to replace the Hicas. What does this achieve and is it designed for track or drag?

Link to comment
https://www.sau.com.au/forums/topic/182071-r32-gtr/#findComment-3307180
Share on other sites

Sorry for the slightly off topic question but it will impact my decision on whether to enquire about the car. I have seen a couple R32 GTR's on here with the rear lock bar to replace the Hicas. What does this achieve and is it designed for track or drag?

takes out any unpredictability with the rear end when doing high speed turning. a good thing to have installed imo. all serious GTR's will have the hicas locked out.

Link to comment
https://www.sau.com.au/forums/topic/182071-r32-gtr/#findComment-3319013
Share on other sites

  • 3 months later...

is this car still 4 sale ???? wana swap........check mi page out n tell me if ur intrested

http://www.boostcruising.com/forums/index....howtopic=261388

Edited by DK (DRIFT KING) JENKYNS
Link to comment
https://www.sau.com.au/forums/topic/182071-r32-gtr/#findComment-3565818
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This is the clearest explanation out of those: Page 77: Turn the crankshaft clockwise two full rotations with the tensioner pulley installation bolt in a loose condition. Insert a wrench into the tensioner pulley hexagonal hole to fix the tensioner pulley in place, then tighten the installation bolts. Tightening torque: 43–58 N·m (4.4–5.9 kg·m). The timing belt tension should be at the correct tension. Basically you turn the engine with the tensioner bolt loose, then use the allen key to hold it while you torque it up. And yes after that a good guide is being able to twist it 90o in one of the long free lengths of the belt
    • good choice....I have a set of those and use them all the time including on this job. Plus, no-one wants a damaged nipple
    • Thanks all, went with nismo strengthened belt and all genuine nissan idler and tensioner Question on RB25DET Neo Timing Tensioner: I have a question about the RB25DET Neo timing tensioner. In one of the videos (minute 20 of https://www.youtube.com/watch?v=17y37BB9xnA and minute 27 of https://www.youtube.com/watch?v=Pb99s2E9xUg), the process suggests tightening the tensioner pulley installation bolt to the specified torque initially, and then loosening it slightly to allow the spring to set the correct tension. Is this the correct approach? The R33 workshop manual on page 74 states: Loosen the tension pulley installation nuts. Insert the wrench into the tensioner pulley hexagonal hole and turn it clockwise to tighten the installation nut temporarily. The way this is written is confusing. Does this mean: Undo the nut, then reduce the tension by turning clockwise? Snug the nut so it stays in position without applying tension to the belt while removing the timing belt? The manual wording makes it sound like the nut will tighten automatically when you turn the tensioner clockwise , which is unclear to me.   Timing Belt Tension Adjustment Process: After loosening the tensioner nut, you turn the engine two full rotations by hand, which should set the correct tension. Once the tension is set, you tighten the bolt to 43 N·m (4.4 kg·m). Before tightening, you need to insert the Allen key into the hexagonal hole to hold the pulley in place while tightening the bolt. In one of the videos, it’s mentioned that you should twist the belt side to side, or turn it slightly to check if the tension is correct. The belt should turn halfway, indicating the right tension. However, I know that twisting or turning the belt is not a good idea. What are your thoughts on this? Finally, how can I ensure the belt isn’t overtightened? I’ve seen many cases where people have overtightened the timing belt.   Manual Excerpts: Page 74: Loosen the tension pulley installation nuts. Insert the wrench into the tensioner pulley hexagonal hole and turn it clockwise to tighten the installation nut temporarily. Remove the timing belt from each pulley. Page 77: Turn the crankshaft clockwise two full rotations with the tensioner pulley installation bolt in a loose condition. Insert a wrench into the tensioner pulley hexagonal hole to fix the tensioner pulley in place, then tighten the installation bolts. Tightening torque: 43–58 N·m (4.4–5.9 kg·m). The timing belt tension should be at the correct tension.
    • Takes a few minutes to malke one. Wood, or steel, or a wrap strap with some strategically placed solids to provide teh drive onto the ribs.
    • I would strongly suggest using the correct tool. They are not expensive and make the job much easier and don't damage the lock ring. Google "fuel tank lock ring removal tool" to see what I'm talking about. 
×
×
  • Create New...