Will This Fit An Rb25?

[DaGr81]

i know these are for gtr's but they look awesome, much better than the plain rb25 ones, anyway i think ive seen somepeople do this before, but does this fit nicely on an rb25? how about the oil pipes, they are much further back on the rb26, the rb25 ones are in the front, does it make a difference?

[abu]

Not bad.

No idea if it fits, but why don't you just get your ones painted?

Probably be cheaper than buying those

If you were in Melbourne, I would have hooked you up with some quality, and well priced powder coating.

Edited August 24, 2007 by abu

[DaGr81]

any1?

[WARLORD]

any1?

no so you should give them to me..... lol lol

yes they fit

but just paint yours

Edited August 24, 2007 by WARLORD

[SECURITY]

they should go straight on, but you'll need to modify the breather plumback hose, you'll just need to get some kind of hose and route it to the standard return.

adont forget the PCV hose has to go somewhere, im not sure how the gtr does it but if it doesnt have a hole for it then you'll have to extend it and 'T' it into one of the breather hoses.

[jeffworld2]

think you need to ditch the crossover pipe fi9rst, or the throttlebody is sitting in the cam cover. can someone confirm?

[BHDave]

The front cover won't clear the vtc gear.

[W0rp3D]

think you need to ditch the crossover pipe fi9rst, or the throttlebody is sitting in the cam cover. can someone confirm?

I would also like to know this, have been trying to figure out a way to move the breather pipes to the back and mount a catch can on the firewall to keep it nice n neat.

[BigBlueR32]

it will bolt on but as previously stated the RB26 covers are too tall to have the stock manifold/intake set up and the VCT gear makes the front cover useless..

[W0rp3D]

any idea how close it is, can a little trimming make it clear or is it way to high?