Jump to content
SAU Community

Recommended Posts

Yeh sorry about that Darren. I saw u asking ppl when we pulled over.

I was trying to tell u i had no idea where i was going and ended up following the guys in the magna.

I was thinking of going via eagle on the hill but ended up feeling really tired and couldnt pay attention.

SO i ended up getting home asap and going to sleep.

Yeh you were next on the list to ask, But all good, freeway drive is a freeway drive in the end! yeh eagles would have been good, should have run it! I noticed you must have taken off, Dan slowed down a bit for us to catch up and you were gone!!

All is good! Next time i'll actually say :whoops: properly!!

  • Replies 241
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Just a quick Q:

Following on from some comments in the photography section and in wasteland, does anyone have objections to the no. plates in photo's?

I couldnt be bothered blanking them, but if someone objects I'll take thier photo down

Cheers

Lee

Madaz:

"Luke they have to stop you and fine you thats just a laser gun very inaccurate also 1 moving object cant pin point another moving objects speed"

I have to pull you up on this one buddy. One moving object can determine the speed of another. All it needs to do is correct for the doppler shift introduced by the moving radar. You just need to calibrate for the motion of the radar. I am a physicist that works with radar a fair bit so trust me on that. :(

A lot of those highway patrols with the radar on the roof have cameras built in on them. Sometimes all they do is speed up to get a photo of your plate and then next thing you know you have a surprise in your mail box.

Luke (Heslo): Nice shot of the cop car dude! :whoops:

Aftdrk:

What's the deal with the music video version you posted. It looks like you have bird crap on the lens that isn't there in the other clips you posted.

Hotwire:

I know some people can be a little touchy about having their number plate showing. I know some people voiced their concern to me after I posted pics from the last cruise to mt barker.

Edited by kalel

^ The camera would have an input from the vehicle speed sensor. That way it would know to deduct X from Y to determine your speed.

They have been using them on victorian highway patrol cars for 10+ years. Essentially it knows the speed they are travelling at. Works out how the difference between theirs and your car, and calculates how fast you are coming at them by deducting their speed... so in your example, the difference would be 140kph, they are doing 80 kph, therefore you are doing 60.

Edited by Hotwire
Thanks "R34", "EVIL 34" and the R34 GT-4... now I want a 4 door R34 even MORE now!

Here comes another bank loan :whoops:

We had our own mini SAU cruise back haha

you forgot the R34 4door i was in :)

Madaz:

"Luke they have to stop you and fine you thats just a laser gun very inaccurate also 1 moving object cant pin point another moving objects speed"

I have to pull you up on this one buddy. One moving object can determine the speed of another. All it needs to do is correct for the doppler shift introduced by the moving radar. You just need to calibrate for the motion of the radar. I am a physicist that works with radar a fair bit so trust me on that. :drag:

A lot of those highway patrols with the radar on the roof have cameras built in on them. Sometimes all they do is speed up to get a photo of your plate and then next thing you know you have a surprise in your mail box.

Luke (Heslo): Nice shot of the cop car dude! :(

ok man that might be correct for a ship using sonar as its radar system but were talking very finicky laser guns that when dropped and bumped and with cold and heat will go out of calibration if excuse me farted near i hold very little faith for SAPOL and the way they allegedly calibrate there equipment. PERIOD i spent about 15 months defending myself because they allege i was doing 147 in a 100 zone and there was no way i was copping that on the chin... any ways long story short my expert smoked there calibration procedures and half of them wernt even done the old close enough is good enough and i got it dropped to 90 in a 80 zone dangerous driving dropped no conviction recorded and no loss of demerit points

It would be interesting to know how those cameras asses the speed "your" doing while "they" are doing X amount of speed! Like if i were doing 60 in a 60 zone and they were doing 80 in a 60, how would the camera determin if its me or them speeding??

here here see above rant.... cost me a lot of moo'la

Madaz you are correct in regard to the hand held devices. A guy who use to work for the company that manufactures our radar systems now works for SAPOL fixing speed detection equipment. He said that the guys doing the calibration don't always do a good job.

In regard to the ones mounted on patrol cars as I mentioned above, once they are calibrated with the vehicle, usually they just hook in with cars on-board computer that does all the trip stuff, they are as about as good as they will get and rarely need re-calibration.

Deluxe:

How does one moving object measure the speed of the other moving object? Hotwire is almost there, but they do it with frequencies rather than speed.

Here is how it goes.

1.)the radar works at a frequency F

2.)If the radar moves like when it is mounted on a car then the frequency of the radar beam is shifted by and amount Fd so the new frequency of the radar is:

F_new=F+Fd where Fd=(F x v1)/C where v1=speed of moving radar and C=speed of light= 300000000 metres/second= 1.08 billion kph

3.) when the radar beam bounces off the car being detected which is moving with speed v2 this produces a doppler shift of the signal of frequency F_new

so you get F_new2=F_new + (F_new x v2)/C

= F + (F x v1)/C + v2 x (F + (F x v1)/C)/C

so given that you measure F_new2, you know the values of v1 (from radar moving speed), F, and C you easily work out what v2 (the speed of the detected car is - the only thing you don't know). A computer on board does that calculation in a split second.

if you are still confused google doppler shift,speed cameras and read up. :)

Hope this clears things up for everyone. :D

Edited by kalel

The govt should have their cars impounded for letting lawyers interfere in science and engineering problems, they're so afraid of the fact these systems aren't perfect (nothing ever is but nor does it need to be) they try to hide the mechanics of this shit behind layers of bureaucracy, instead of clearly explaining how this all works, where it can fall down, but also the checks and balances in place to pick up when and where it does... but most importantly doing it in plain english.

Kalel's given you all lesson on the science, and I've worked closer to all this than I care to admit on a motoring forum, the above is tied up in politics and a general disrespect for intelligence of their voters.

But at the end of the day you all know when you've been speeding, personally I've been done three times, and I was in the wrong each time. If you have a GENUINE doubt then pursue it like anything else, but if you KNOW you were speeding take your lumps and stop whining (this isn't directed at any one in particular I must stress), don't fight it coz it makes ratings for Today Tonight.

oh yeah Ash couldn't agree more

i didn't go all the way with it cause i was pushing my luck and trying to get off something i had done i did accept the 90 in a 80 zone because i was speeding just not the amount they claimed, plus a years loss of license was worth $1500 and fighting for

BTW i hoped my comment before about Kalel was taken tounge in cheek go to admire a smart man im only as smart as my google searches :) and spell checks

Just a quick Q:

Following on from some comments in the photography section and in wasteland, does anyone have objections to the no. plates in photo's?

I couldnt be bothered blanking them, but if someone objects I'll take thier photo down

Cheers

Lee

no worries here, ppl who iv pissed off prob already hav my plates an dont read these forums SO MORE PIKS I SAY

But at the end of the day you all know when you've been speeding, personally I've been done three times, and I was in the wrong each time. If you have a GENUINE doubt then pursue it like anything else, but if you KNOW you were speeding take your lumps and stop whining (this isn't directed at any one in particular I must stress), don't fight it coz it makes ratings for Today Tonight.

Too true Ash!

I just was curious thats all!!

Aftdrk:

What's the deal with the music video version you posted. It looks like you have bird crap on the lens that isn't there in the other clips you posted.

Hotwire:

I know some people can be a little touchy about having their number plate showing. I know some people voiced their concern to me after I posted pics from the last cruise to mt barker.

haha sorry kalel i was just mucking around with some trial software that i had to download to put the clips together, that 'bird poop' on the music version was the watermark from the program i was using, oh yeah and i was using my crappy phone camera :)

Edited by AFTDRK

you should try ulead video studio thats was i was using trial software also i think i even first compressed the .mov into mpg in sony vegas pro 8.0 trial :) goto love trial software then formats :D

also http://www.virtualdub.org/ is free

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The engine stuff is Greg Autism to the Max. I contacted Tony Mamo previously from AFR who went off to make his own company to further refine AFR heads. He is a wizard in US LS world. Pretty much the best person on earth who will sell you things he's done weird wizard magic to. The cam spec is not too different. I have a 232/234 .600/603 lift, 114LSA cam currently. The new one is 227/233 .638 .634. The 1.8 ratio roller rockers will effectively push this cam into the ~.670 range. These also get Mamo'ified to be drilled out and tapped to use a 10mm bolt over an 8mm for better stability. This is what lead to the cam being specced. The plan is to run it to 6800. (6600 currently). The Johnson lifters are to maintain proper lift at heavy use which is something the LS7's supposedly fail at and lose a bit of pressure, robbing you of lift at higher RPM. Hollow stem valves for better, well everything, Valve train control. I dunno. Hollow is better. The valves are also not on a standard valve angle. Compression ratio is going from 10.6 to 11.3. The cam is smaller, but also not really... The cam was specced when I generated a chart where I counted the frames of a lap video I had and noted how much of the time in % I spent at what RPM while on track at Sandown. The current cam/heads are a bit mismatched, the standard LS1 heads are the restriction to power, which is why everyone CNC's them to get a pretty solid improvement. Most of the difference between LS1->LS2->LS3 is really just better stock heads. The current cam is falling over about 600rpm earlier than it 'should' given the rest of my current setup. CNC'ing heads closes the gap with regards to heads. Aftermarket heads eliminate the gap and go further. The MMS heads go even further than that, and the heads I have in the box could quite easily be bolted to a 7.0 427ci or 454 and not be any restriction at all. Tony Mamo previously worked with AFR, designed new heads from scratch then eventually founded his own business. There he takes the AFR items and performs further wizardry, CNC'ing them and then manually porting the result. He also ports the FAST102 composite manifold: Before and after There's also an improved racing crank scraper and windage tray. Helps to keep oil in the pan. Supposedly gains 2% power. Tony also ports Melling oil pumps, so you get more oil pressure down low at idle, and the same as what you want up top thanks to a suitable relief spring. There's also the timing chain kit with a Torrington bearing to make sure the cam doesn't have any thrust. Yes I'll post a before and after when it all eventually goes together. It'll probably make 2kw more than a setup that would be $15,000 cheaper :p
    • Because the cars wheels are on blocks, you slide under the car.   Pretty much all the bolts you touched should have been put in, but not fully torque up.   Back them off a turn or two, and then tighten them up from under the car with the wheels sitting on the blocks holding car up in the air.
    • Yes. Imagine you have the car on the ground, and you mine away all the ground under and around it, except for the area directly under each individual wheel. That's exactly how it'd look, except the ground will be what ever you make the bit under each wheel from
    • Yes, if you set the "height" right so that it's basically where it would be when sitting on the wheel. It's actually exactly how I tighten bolts that need to be done that way. However....urethane bushes do NOT need to be done that way. The bush slides on both the inner and outer. It's only rubber bushes that are bonded to the outer that need to be clamped to the crush tube in the "home" position. And my car is so full of sphericals now that I have very few that I need to do properly and I sometimes forget and have to go back and fix it afterwards!
    • Discover the best Halal food near you with Maharajaonline.com.au. Our delicious selection of Halal dishes will satisfy your cravings and make you feel like royalty. Try us today and experience the difference!   halal food near me
×
×
  • Create New...