Jump to content
SAU Community

Just Because I'm Excited Guys

Spooner

By Spooner,
in Queensland

 Share

Recommended Posts

GOR33 Mentor

GOR33

Posted
Posted
dont use a microguess, only poor rotor owners use them

and make sure u get a WRITTEN quote from predator, or expect to pay 3x the amount they originally quoted u, im dead serious

P.S have fun lighten up 3rd on the fly when she's done :)

lol only poor rotor owners like pac performance? on their 6 seconds drag car? u have no idea do u lol

microtech would be fine for you car but im not sure if it allows u to keep all your electronic comforts such as air con. as for tuning its fine mate.

Al Grand Master

Al

Posted
Posted
nice choice of turbo

I made 303rwkw at 18psi with the same turbo (with the .84 rear) tuned by predator

In theory it should be a good set up....spools up nicely but yet to fell the full effect, but the less said about that in public the better

Any dyno graphs?

I am using this turbo on my RB30DET build and wouldn't mind comparing it to an rb25det.

My engine will have the following parts: GReddy plenum, q45 throttle body, 550cc SARD inj, Tomei Poncams, Extensive Head Porting, Tomei Valve springs, High mount ext manifold (Extreme Turbo Manifolds), Forged internals, GTR race bearings, ATI balancer, etc.....

All tuned via a Wolf3D V500

I was hoping for anything between 270-300rwkw; but after reading your post i am looking at about 320-340rwkw@20psi :)

Bunta Grand Master

Bunta

Posted
Posted
Any dyno graphs?

I am using this turbo on my RB30DET build and wouldn't mind comparing it to an rb25det.

My engine will have the following parts: GReddy plenum, q45 throttle body, 550cc SARD inj, Tomei Poncams, Extensive Head Porting, Tomei Valve springs, High mount ext manifold (Extreme Turbo Manifolds), Forged internals, GTR race bearings, ATI balancer, etc.....

All tuned via a Wolf3D V500

I was hoping for anything between 270-300rwkw; but after reading your post i am looking at about 320-340rwkw@20psi :)

I will get it and scan it for you mate

Spooner Collaborator

Spooner

Posted
  • Author
Posted

well its not looking good for the weekend :pwned: car is at Predator now getting exhaust done, but I am waiting on an intake pipe to arrive. I am flying to sydney tomorrow arvo and wont be back till 7:30 Friday night, and I need to get the pipe to the shop so they can fit it up. So I guess I'll be seeing you guys next weekend if anything is happening, but im pretty sure I'll be so happy about having the car back on the road that i'll be driving it down the driveway to check the mail I miss it that much, hahahaha

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      MR HAMMER has said his piece. Painted up to avoid Rusty Rusty. Actually lines up well. (i.e it lines up the same as the unmolested GTR guard). Turns out the GTR Strut brace does foul on the bonnet vents ever so slightly. May need a little bendy bendy if intended to keep using with a strut brace. So spacing it out to clear the FAST102 is not an option. Annoyingly, the bonnet vents also foul on the heater lines running over the engine. Given this engine does not EVER require a heater, a delete loop is going to be used. Don't worry, the defogger uses the AC. The heater is basically "Do not use the aircon and turn the fan on". It will still be effective, I promise.... once I get the system regassed... Will have to revisit with unvented bonnet I suppose, and suitable strut brace. There's plans to do this and other things tonight and bleed brakes (there was a weep) and put the bumper back on, and take Good Friday morning - Because troubleshooting on the side of the road limping it home at midnight tonight is ... not very smart.
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      Thank you all for you assistance. I contacted Nistune regarding the support for the RB20DE along with my ECU Code (23710-10U00). They do have a map for it and added the RB20DE as a purchasable option now as well. They also added Malta as a Billing and Delivery options as this was missing. I was honestly amazed at their quick response and action, it took less than 24 hours. I also looked again at direct fit options for injectors, just in case I were to replace them. DeatschWerks seem to use a Bosch EV14 base and makes ones that fit mine at 440cc lowest, but also have 550cc at the same price. I tried looking for other direct fit options and managed to find one (also Bosch EV14 based) which includes a plug and play adapter on ebay. Did a small test with a Noid Light on the troubled injectors and all seems good, so they are pulsing properly electrically. One weird part is that they are missing on the same two cylinders as before I got the injectors cleaned. Mechanic also found this weird as he did not label the injectors and it is unlikely to have the faulty injectors be installed in the same cylinders.  
    • Murray_Calavera
      Exhaust silencers/varex exhausts

      By Murray_Calavera · Posted

      Nice, let me know how you find the 98 tune
    • GTSBoy
      R33 GTS25 NA - Stalling when vehicle is at operating temp

      By GTSBoy · Posted

      Put a hand on an injector and see if that's what the buzzing is. You might be triggering the injectors by moving off idle command.
    • PotatoCake
      Exhaust silencers/varex exhausts

      By PotatoCake · Posted

      Ah, should have been clearer. Currently has a flex sensor installed all good to go.    like u mentioned, I’ve only ever known the car on e85, I might hate 98, but I have to try it out first. Everyone says the -5 turbos get pretty laggy on 98 octane tho…
×
×
  • Create New...