Jump to content
SAU Community

Recommended Posts

Over the last few weeks I have noticed that my right head light is getting very cloudy on the inside but the left one is fine. Does anyone know why this has happened and what do I have to do to fix it. Is there a way to take the headlight cover off and clean it?

Maybe yours has had a smash and the one that's clear is a newy? The only way to clean them if its on the inside is a pain in the ass. It involves taking the headlight assembly apart cleaning it with polish and re-sealing it.

Do a search it's your friend :P

if it is on the outside supercheap auto sell a headlight resoration kit. used one on a mates headlights a few weeks ago and works a treat. so all those skyline with cloudy headlights can clean them with ease now.

cheers brad

Check the breather tube first, but likely moisture is getting in somewhere. So find some new sealant and pull the sucker apart.

10-15 minutes in the oven at 200 deg farenheight.. NOT CELCIOUS.. and it will come apart with ease.

i had the same issue, but it didnt matter what i did i still had a one light slightly duller lookin than the other. i used clr. i ended up buying clean used lights and sealing them up. havent fogged or leaked at all. so if you can clean them up good as mentioned above seal them up tightly.

I can almost guarantee its NOT on the inside. All skyline lights are made of the same plastic and unfortunately it gets stuff on it and goes all cloudy. I'm not 100% sure what it is, but you'll notice older ford falcons have the same problem. They fixed it from the AU and onwards and I have a brother with an AU wagon which has the clearest headlights I've seen and he's never cleaned or polished them.

Here's a tip to try - i've tried it on my headlights (which are both cloudy evenly) :laugh:

it wont cost you much, and you can buy it in every supermarket.

and its called....

TOOTHPASTE.

yep, its been covered on this forum before. I've tried it on one of my headlights, as my bro polished the other one with mcquire's polish (available from auto shops like sprints/supercheap etc). Whilst you could tell the difference, it was surprising how effective the toothpaste was.

Obviously avoid getting any on the paint because toothpaste is abrasive. But on the plastic it works fine and will polish up quite good with a bit of work.

If you want a really good polish I'd recommend mcguires. Its good stuff - just go easy when applying polish to metallic paint, some polishes will destroy it (read the label and also try it on a small section thats not very visible first).

Either way, they will get cloudy again in time. So re-apply whatever works for you as its needed.

  • 3 weeks later...

umm all skyline lights are plastic??? id hate to make u look silly but... my GTR lights arent plastic.. theyre glass and the right side still gets hazy/dirty on the inside

umm all skyline lights are plastic??? id hate to make u look silly but... my GTR lights arent plastic.. theyre glass and the right side still gets hazy/dirty on the inside

Mine are glass and they're perfectly fine at the moment. I think you could have stuffed seals. They shouldn't get foggy.

r33 non xenon headlights are plastic... r32 an i think r34 are glass.

what you'll probably find is that moisture is getting inside you headight that gets dirty (usually thru a crack or a break in the silicone seal). water can carry dust particles and also speed up the UV reaction that the plastic undergoes.

r33 non xenon headlights are plastic... r32 an i think r34 are glass.

what you'll probably find is that moisture is getting inside you headight that gets dirty (usually thru a crack or a break in the silicone seal). water can carry dust particles and also speed up the UV reaction that the plastic undergoes.

R33 and R34 Plastic! R32 is Glass!!

Anywayz try Meguiar's PlastX my R33 had cloudiness and oxidation!! LOOKs like new again! under $20 from autobarn..product_G12310.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Means something is not set up right, tune/calibration related.  
    • Finally replaced the previous temporary mesh indicator surrounds (temporary was the last 10+ years 😂) with a 3D printed GTR style version for the front indicators. I think it looks a lot nicer than the old setup and at least the indicators now point in the correct direction rather than angled off. Needed a little bit of tweaking to deal with the intercooler piping but got there in the end. Old and new photos below. 
    • It's weird to me that you say this because I'm pretty sure locals with relatively standard standalone tunes (boost/barometric compensated alpha-N) still have driveability issues when they pop intercooler hoses. Maybe with enough data I can just train some kind of model that spits out an expected grams/cyl given every sensor input except MAF like what FCA did with their Pentastar 3.6 ECU logic. Basically stock everything. The main motivation honestly is to have a sensor that can be a decent baseline source of truth. In scenarios you're describing obviously it won't work every time but it seems to me the number of corner cases that exist in MAF load is maybe not as severe and difficult to manage vs ITB alpha-N with some MAP/barometric compensation.
    • What are your plans for your blow off valves? Purely plumb back? How soft will the spring in them be? AFM can be tricky to get super smooth and nice, especially depending on the rest of the system, and then can be very easily upset if something slightly changes. IE, even if you run recirc blow off valves, you could still see issues getting it to behave at certain load points as turbos might start to spool, but you release the throttle but it's not enough pressure to crack the bov open to recirc, and you can end up with reversion which can cause double metering, and hence dumping of fuel into the system, and stalling the engine.   If you're going to run a map sensor for closed loop boost control from the ECU, what makes you want to keep the AFM?    
    • It's not bad, it's just not flexible. And say if you have any leaks between the MAF and plenum, well then your load axis goes out the window. Here's a real world scenario, I blew off an intercooler hose last track day, as the clamp decided to Bluetooth itself somewhere. Still continued to do 2 laps and drive it to the pub for a couple of beers then home. Good luck doing that with a MAF setup 
×
×
  • Create New...