Jump to content
SAU Community

Recommended Posts

hey, i have just picked up a 33 ser 2 gts-t. i have no reverse lights, i checked the globes and these are fine. i checked all my fuses and these are all fine.

it has a short shift kit installed (unsure of which brand) does this have any impact on the reverse sensor in the gearbox?? has anyone had to replace the reverse sensor if this is my problem

any help would be appreciated.

thanks Brad

Link to comment
https://www.sau.com.au/forums/topic/182413-no-reverse-lights/
Share on other sites

hey man, my mate has an series 2 gts-t with the same prob. his reverse globes are fine, but when its in reverse the lights flash on and off....he worked it out to be a problem with the gearstick or whatever sensor controls the lights...when he's reversing if he holds the gear stick forward just a tiny bit the lights go on, but if he lets it sit right down where it does naturally they go off....sounds similar to yours...

if you work out how to fix it post back here and i'll let him know ;)

  • 1 month later...

I have the exact same problem with my R32 GTS-T. Did a search and found this thread.

I found that if I hold the gear firmly into reverse - the lights come on.

If I let it sit in reverse as normal - they dont come on.

Did anyone end up finding a solution?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My son has an R34 gt auto. I'm looking at methods on how to tune it with the view to be able to further tune it down the track when he is off his P,a and can go turbo. The issue is the 98 gt auto has a seperate TCM and is not compatible with swapping out a gtt auto nistuned pcm ( from what I have read so far ) Please if anyone has info on what to do here I would much appreciate. Realise that some options include manual swap, manualised valve body. Just hoping there is a more direct running option I haven't been able to find. Thanks in advance. 
    • Hi Everyone, I did 4.11 gears in my 34 GTR and only thing that remains is to fix the speedo reading (it reads about 15% higher) using the R33 GTR speedo sensor. Few questions:   1. Does the R33 speedo sensor fit right in to the 6sp getrag? I read it does but wanted to confirm because the speedo sensors between 33 and 34 look quite different   2. The connector on the 33 speedo sensor will not plug into the connector on the getrag. Do I just need to wire the pins together manually?  See pic: https://imgur.com/a/NTDzFe8
    • Does anyone know how I could find the part number for bolts used with  r34 with rb25detneo engine lower timing belt cover?   my timing cover was rubbed and i fixed it but upon putting the harmonic balancer i see the timing cover is almost rubbing and that is due to previous owners using general bolts and washer rather than the bolts per link below which sits inside the washer and pull the cover in   not sure if those bolts will fit rb25   https://www.ebay.co.uk/itm/326510870741?gad_source=1&gbraid=0AAAAAB_7XZxjuciMybdVOTShCs9857686&mkevt=1&mkcid=1&mkrid=710-53481-19255-0&campid=5338723872&toolid=20006&customid=7jIl12glAAAAVfHSSnyxAmSsdRxnAAAAAA
    • If the slightly higher internal EGR caused by a high flow cat causes detonation your tuner was way, way, way too aggressive to begin with. Timing scatter is a problem unless you go to a crank trigger, winter vs summer blend has different octane, list goes on.
×
×
  • Create New...