Jump to content
SAU Community

Recommended Posts

How to Fix a front bar :)

anyway was detailing my car today just minorly.. waxed her up and got the old polisher out and buzzed her down.. noticed my front bar sagging :( opps minor drift incident from last sat ahaha easy fix.. :P

ZIP TIES :nyaanyaa:

also heres some pics of the 180 after a quick wax and buff :)

black cars look hot when clean..

post-25555-1188196843_thumb.jpg

post-25555-1188196966_thumb.jpg

post-25555-1188197092_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/182483-how-drifters-roll/
Share on other sites

Also to make this thread a lil more useful..

Post Up what cleaning Products you use.. also if u got some pics of the cars finish that would be swell:)

used.

Armor All wash and wax

AION CHamois

Armor All interior cleaner

Mothers Cleaning wax California Gold label.

Armor All super soft Polishing Cloth

i use a Supercheap 10"rotory polisher

thinking of changing from the wash and wax to a wash only.

Edited by markimak
She's looking pretty flash mark, makes me want to get one sooner ( damn 5 week holiday got in my road) :( .Yes zip ties are a drifters best friend :P

seey a guys.

not bad for 2 hours of my life..

chris is u come to the coffee meet this sat ill show u over the 180sx :nyaanyaa: i want u to get one.. we can do tandems :laughing-smiley-014:

Dont they have 180sx forum somewhere else than here??? Last time I looked this was a SKYLINE forum. (joke)

zip ties are the best thing since sliced bread

you guys need me.. and who would do ur cooler installs.. shane.. :P wanna wait 1 year for a engine to be built lol?

you guys need me.. and who would do ur cooler installs.. shane.. :P wanna wait 1 year for a engine to be built lol?

Need you.....no, Tolerate you......yes,, tired of your 180 silvia crap.......most definitely. This is a skyline forum. :nyaanyaa:

u dont want to comment on the zip ties noel..?

marki ya gotta let go :P

Those red ties in Noels' engine bay set it off sweet I reckon

mick

sorry :nyaanyaa:

ahh ArmorAll car wash

yellow cheap as sponge

Kemco hydro chamy

Elbow grease

Edited by pnk32
not bad for 2 hours of my life..

chris is u come to the coffee meet this sat ill show u over the 180sx :) i want u to get one.. we can do tandems :laughing-smiley-014:

would love to come but im heading out of the country for over a month from tomorrow.Will definitly want to when we get back.

So Mark drift safely :P

nice lookin pos marki. maybe u wont need to use zip ties when u learn to drive :P

for cleaning products, i've used the following:

Meguirs Gold car wash

Meguirs Gold Chamois

Meguirs Terry Clothes

Meguirs Microwipes

Meguirs Applicators

Meguirs Deep Cleanse

Meguirs Paint Cleaner

Autoglym Synthetic Wax

Turtle Wax Carnuba Wax

im pretty much out of that and gonna get a full set of the Zymol stuff, dont need it til the car's running so that'll be awhile lol

Need you.....no, Tolerate you......yes,, tired of your 180 silvia crap.......most definitely. This is a skyline forum. :thumbsup:

come on noel.. ill see if can dig up that pm u sent me a while back when i left for a while.. u miss me.. just cause we dont have sexy time and no hang at dnner lately... lol

please we have a skyline.. its on bricks in the bottom carpark...

Zymol polish, Meguires paint cleaner and brite shine and mothers on the chromies the ones you love MARK.

ahaha kill themm chromies.. i actually saw some nice chromies.. but they had like 5inch of dish and wernt gay patterned

Zipties rule. You should see the front bar on our silvia lol

ahaha :sorcerer: hi5.. but ur a drifter too woot...

would love to come but im heading out of the country for over a month from tomorrow.Will definitly want to when we get back.

So Mark drift safely :glare:

haha its still a bit patchy changed the front camber settings.. lol mcpherson struts lol..

nice lookin pos marki. maybe u wont need to use zip ties when u learn to drive :nyaanyaa:

for cleaning products, i've used the following:

Meguirs Gold car wash

Meguirs Gold Chamois

Meguirs Terry Clothes

Meguirs Microwipes

Meguirs Applicators

Meguirs Deep Cleanse

Meguirs Paint Cleaner

Autoglym Synthetic Wax

Turtle Wax Carnuba Wax

im pretty much out of that and gonna get a full set of the Zymol stuff, dont need it til the car's running so that'll be awhile lol

ur right shane ur always right.. :P

Zymol.. how much that cost.. u go to alot of trouble for a car that doesnt work.?

expensive marki, farken expensive. i'm talking ~700 for a full kit

i had all this gear from when i got my 33 imported back in 05, i had it freshly resprayed so i looked after it like u wouldnt believe!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • PRICE  : $1400 LOCATION   : NSW Central Coast FIT  :  All Nissan 350Z type Z33 and Infinity G35 Coupe. See delivery note. Hi, brand new, unused, still in the box.  ($1850.00 is what i paid ) My bad luck !!! I thought my right front  Bilstein was cactus so i bought the ST 's to replace all.  Turns out the right front is fine ( loose mounting after service  by a well known importer of Bilsteins ) So im selling the ST's. They are made by KW ( no intro needed ) . Iam on the Central Coast and im willing to meet up in Sydney metro, within reason and Newcastle.
    • Yep, yeah would need to do the flywheel although the 6 bolt NA clutch can handle a 20de if just wants to replace the stocker.
    • No it's fine. Heat sleeve is a thing. With oil running through it it is unlikely. Engine off heat soak can be a thing though. There is no way that you have a leak through the hose. That has pressure behind it and any small hole will turn into a large one in very short order. It is so much more likely to be leaking from the connection.
    • Really? That's piss weak. I didn't know they hobbled the shitboxen that badly. OK. So probs need to buy a flywheel too. But that's not too bad.
    • Hi all. I already posted some newbie-ish questions here and there but this will be my first "big" post. Last summer I went and fulfilled a kind of childhood wish, because I just thought I needed this experience in my life no matter what. The car I bought is a mildly modded 1995 BCNR33 Vspec. It was repainted to a metallic orange color all around and it had all windows reseated. Not so well done black respray in the trunk and a metallic black in the engine bay. From outside it looks very nice except for a minor paint error on the roof and the rear spats needing new adhesive tape. The inside is pretty clean and no broken plastics, missing or faded buttons. Even the adjustable mirrors and trunk antenna work like a charm. Despite a moderately long list of issues I don't (yet) regret buying this car. Most mechanical problems are just due to age, like worn rubbers here and there. The underside sadly has lots of corrosion, especially to the back. It looks like it either has been driven in the winter for a while or it lived near the saltwater in Japan, the rust is nothing terrible but it'll require to be looked after. Mostly panel gaps and all the mounted components underneath are a bit crusty, but I don't think anywhere has progressed so badly that there's going to be holes. Front right jacking rail is crushed and needs some care so it doesn't develop into a rust crater at some point. Worst part is definitely the strut towers. I thought they looked fine but after taking off the strut bar I noticed that it actually started bulging up on the passenger side. Probably would have passed on the car or negotiated down by some thousand Euros more if I had noticed this before buying, but here we are. Trunk area also has signs that there was a water leak to the interior once but nothing too crazy, I guess lots of Skylines had this at some point. As for the list of (known) issues, I'll try to make this compact. I hope the coloring is self explanatory. Mechanical: -Various busted or soon-to-be busted rubber bushings and ball joints. Will replace ball joints with OEM or better and bushings with polyurethane where possible. -Shaking steering wheel at above 80kph -downshift from 5th to 4th is a bit crunchy unless I rev-match, might just try to renew the shifter assembly, but it's not a priority issue -tailshaft centre bearing could use a replacement, is it worth going 1-piece tailshaft as it doesn't look too fresh all around? Chassis: -underbody corrosion on many spots and in hollow spaces, needs to be treated -corrosion on many bolts, hoses, lines, suspension components, subframes, will be treated when replacing of the bushings is needed as time goes on -strut tower top panels and some of the surrounding panels are rusty, so needs fixing. Will look into doing this with a buddy in the winter, otherwise bite the bullet and pay a professional -driver side door is misaligned to the body and needs to go a slight bit more inwards -both door windows are misaligned and have an airgap where the window meets the door at the B pillar -The Aerocatch latches for the bonnet have locks but no keys, need new keys. -driver side door window is kind of gritty and could use a polish -damaged jacking rails and front frame rails, from people lifting the car the wrong way, might have this fixed by a bodyshop Electrical: -Nismo tachometer is just bouncing and displaying nonsense, supposedly worked fine when the stock ECU was still in the car -An old Greddy boost controller sits on the dash which will be removed as it servers no purpose anymore. -a led segment rpm gauge is on the steering column, will probably also be (re-)moved once the Nismo tacho is working correctly -there was an attempt to make the sound system better by the previous owner but it was just inducing noise all the time, ripped out the amp and filters in the back, no music for now -trunk antenna goes up as long as the radio is on regardless of the mode, I want it to only rise if I choose Radio specifically or per switch -3rd brake light is a bit dimmer than the taillights but everything was converted to LEDs so mabye now it just seems dimmer? -reverse light flickers, have to test if that behavior changes when I fiddle with the gear stick. Hope I can get around changing the switch. -Left side taillight, blinker section has minor water intake and is humid after washing. Other side has a hole in it, probably for that exact reason. I'll probably reseal them entirely and plug the holes. Engine: -minor coolant drips on one or the other hose -rear turbo leaks oil onto the exhaust making the car essentially undriveable due to fire hazard -Oil filter relocation kit has an oil drip at the Dash lines, will probably make a new connection there and tighten real good and pray -throttle body assembly is slightly stuck for the first throttle pedal input after sitting for a while I'm always open to suggestions and advice from more experienced people, I'm sure half of this list is easily dealt with and just requires some time and effort to sort out properly. Once I have some proper pictures of the car I will post some in this thread, I just have to remember to take some more once I get the chance to. Will post updates when I have news on anything, I want to try to keep this thread as kind of a logbook as well. Ultimately my goal for this car is to just enjoy it. An engine rebuild is probably going to happen sometime as well, because it is old after all. It will never be fully new again, I am just not that rich. But I want it to look good, work well and not rot away while I drive it. I'm probably gonna spend a lot of money on this journey, hopefully not an unreasonable amount.
×
×
  • Create New...