Jump to content
SAU Community

Recommended Posts

My aerial wont go up or down. It just stopped working one day.

Is there a fuse for it somewhere?

Is there a common fault to look for with these?

Are the motors known to just die? Mine isnt making any noise, so it's not likely to be stuck, or trying to work at all.

I already pulled my deck out and checked the power aerial wire was still connected.

Link to comment
https://www.sau.com.au/forums/topic/182488-r33-power-aerial-is-there-a-fuse/
Share on other sites

did you try connecting a wire straight from the battery onto it to make sure something in the deck isn't stuffed. also may be worth pulling out the plug that controls the height and making sure that it is connected properly

hey chris

it's an S1

which black/red wire?

there's a red/green wire hooked up to the headunit power aerial (blue) wire. it was working fine before.

also, while we're at it, what's this for? (see pic). it's bolted inside the rear quarter, just before the aerial.

post-29392-1188374361_thumb.jpg

hey chris

it's an S1

which black/red wire?

there's a red/green wire hooked up to the headunit power aerial (blue) wire. it was working fine before.

also, while we're at it, what's this for? (see pic). it's bolted inside the rear quarter, just before the aerial.

post-29392-1188374361_thumb.jpg

fuel pump ballast resistor I believe.

ok does it have voltage on that wire in the back? pull the antenna out and check for power on the plug. it should show up in 3 places. one that has +12 on it. one should have +12v key and the last +12v radio.

if all 3 are there then its motor time.

fuel pump ballast resistor I believe.

ok does it have voltage on that wire in the back? pull the antenna out and check for power on the plug. it should show up in 3 places. one that has +12 on it. one should have +12v key and the last +12v radio.

if all 3 are there then its motor time.

do you mean the wire in the back of the headunit? will check when i get time, in the next 2 days

if thats showing 12v, then i'll take the antenna out of the rear quarter and check for voltage.

chris, could you give me a quick guide to removing the antenna?

theres only 2 bolts holding the antenna assembly from the inside. is that right?

and do i need to remove the external bit around the tip on the outside of the rear quarter?

i havent had time to get to it yet.

thanks mate

IF you really need help I live in Liverpool area in sydney I can give you a hand if u want. I do this for a living, thought I help out a skyline member. Cheers Andy

thanks for the offer mate :D

i think i've got it covered. now i need to find time to do it. lol

Edited by Munkyb0y
  • 3 weeks later...

ok, i checked the voltages........finally, and i got 12v constant at one point, 12v on ignition at another 2 points, and 12v on 'tuner' at another point.

looks like the antenna is stuffed. i havent tracked one down yet.

can you answer these 2 questions for me? (refer to pic)

cheers.

post-29392-1189917638_thumb.jpg

ok bottom item is the water drain tube. that drains teh antenna so when you wash / runthe car trhrough water it doesnt stay in the motor and destroy it.

antenna wwire (top) will unplug. give it a good tug and it will release.

looking at that I think I can find one Identical to it in an aftermarket version.

happy to try if you want to send it up to me.

ok bottom item is the water drain tube. that drains teh antenna so when you wash / runthe car trhrough water it doesnt stay in the motor and destroy it.

where does it drain to? is there a drain hole somewhere in the rear quater?

you have pm

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I don’t really have any ideas how to set the timing on the CAS 😂, sounds like the top, sounds like it maybe misfiring as well as ticking,  got the box sorted 😌, must of been a air bubble on the clutch side
    • Use a 2' length of hose (that's 2 foot, not 2 inches) as a stethoscope to localise the source of the ticking. From cam covers? From exhaust or turbo manifold gasket? From injectors? From lower down in the engine? Etc. Use a timing light to set the timing. Put Redline Lightweight Shockproof in the box. It's not the very best thing for the box, but it will take a box that refuses to engage a gear with other oil, and make it engage a gear. I had to put it in when I installed the R33 box I have in my car. It would not select ANY gear when running. Smurf jizz made it work. That was >10 years ago and I still use it. I'm stuck with it now. Failing that - rebuild the box.
    • Well done Duncan. The fuel tank bulkhead lid is also in great condition (some of mine were stuffed). These are now out of production and good ones like that are becoming hard to come by.
    • Wow that's a steal, you've done well there. 
    • Exterior LEDs R34 2Dr R34 4Dr Position Lamp T10 T10 Winker front T20S T20S side T10 T10 rear T20S S25S150 Anti-hyfla relay TYPE3 TYPE3 tail T10 T20W Stop Lamps T20W T20W High Mount T16 T16 back T16 T20S number T10 T10 trunk T10 T10 Interior LED Item No.     Map Lamp BA9S single-sided     Room Lamps T10×31     Trunk Lamp T10     meter Early T6.5 pedestal     final T6.5 pedestal     NISMO T6.5 pedestal     Liquid crystal section T6.5 pedestal     Winker T6.5 pedestal     High Beam T6.5 pedestal     3 SERIES METER Early T6.5 pedestal     final T6.5 pedestal     NISMO T6.5 pedestal     air conditioner Early Liquid Crystal T3     Late LCD T4.2 Short     button T4.2 Middle     Hazard SW T3 Pedestal Short     Keyring T5     Cigar Socket T5
×
×
  • Create New...