Jump to content
SAU Community

Recommended Posts

Im proud to say this is my first post on SAU, unfortunatly its not a happy one.

I scored myself a 1989 R32GTR for a reasonable price. I absolutely love the thing and im not ashamed to say im obsessed with it. Any noise or feeling out of the ordinary i would have it checked out.

That being said i even have sleepless nights over it!!!!

I have been reading alot of articles about the dreaded Engine Rebuilds and on average people are spending between $10,000 to $12,000.

What are people doing to get to that point!!! I mean my engine is completely stock and never been on the track (as far as i know). Its clocked up 148,000kms and still runs fine except for a gearbox whine which im checking out soon.

Do i need to concern myself with such news?

I would love peoples opinions about my concerns, im pretty sure people would share the same.

Link to comment
https://www.sau.com.au/forums/topic/182739-should-i-keep-an-89-r32-gtr/
Share on other sites

From what I can gather from reading this forum and other info on the www is that people have an engine failure withing 6 months or so of owning it.

If your carefull and take care of your car there isnt any reason that your engine will not make it to 300,000k's or beyond

if your car is running stock boost, it will probably run for ever. Its only when you start upping the boost and other things that shorten the engine life. Engine rebuilds are not cheap, especially if you want to get a good job done. And then you'll start saying 'well, as long as the engine is out, might as well do the turbos and the rest' ... viola, $12k :)

Dont modify it, you generally wont have a problem. :)

Its when people try to chase every poofteenth of a kilowatt with the stock turbos, or lean heavily on stock motors (over 300rwkw) that you are going to have issues.

One turbo dies (generally rear), and then the motor goes along for the ride due to dust.

Or other issues surrounding oil pumps etc etc.

If the car is not over boosted, serviced regularly and not driven like you've stolen it. Then you really have nothing to worry about.

I would confirm it has had the 100k service. This is critical to change the oil/water pumps and idler bearings which are all common fail points.

Mate, I've got an '89 R32 GTR with just as many k's, making 250rwkw on 1bar. Fresh-ish stock turbos however.

Anyway,it's going strong and hopefully will for a little while yet - fingers crossed. But if it breaks, i'll deal with it.

I don't spend my time worry about it - takes the enjoyment out of actually having/driving the thing.

Like others have said if you keep it stock, and treat it well, there is no reason why it'll need a rebuild anytime soon.

And this may or may not help but Redline lightweight shockproof does wonders for tired GTR boxes - maybe it'll prolong the life of it a bit while you save some pennies.

$10K - $12K rebuilds are due to people going "well.. it's already apart, might as well do this and might as well do that."

In all honesty, if your car is stockish, and you're use for it is street use, and the turbo fails and the engine goes, you could get away with fixing it for alot less than the figures you read.

example from Nismoid...

your rear turbo blows, ceramic exhaust wheel dust goes in to the engine, resulting in low compression on the rear cyclinders.

so you're up for a rebuild and a pair of turbo's.

You can pick up a pair of R34 GTR turbo's for about $700.

yes they still have a ceramic rear wheel but they are about 10 years newer, and also ball bearing.

You can have your engine rebuilt using stock cast pistons instead of fancy forged gear.

while it's apart, change the wear and tear things, like water and oil pumps, timing belt, idler, gaskets and seals etc.

you could have the car back on the road and running like new for about $5K - $6K.

and you have new turbo's, no oil leaks, no exhaust leaks, even compression etc.

don't lose sleep.

and if it ever breaks and needs a rebuild, and the car is only STREET DRIVEN, do a standard rebuild and don't start saying "well since it's already apart, might as well......."

that's where it doubles in cost.

Im in the same boat. Ive got a r32 gtr with about 130'000 kms and i have stressed about the cost of rebuilds and whatever. But really, its been 1.5 years now and its been the most reliable car ive owned. Sure some stuff needs attention like the CV boots and other stuff that gets old but mechanically its been great and never left me on the side of the road like the r31 i had.

If like me you want to be sure about things.. id do the following.

Get some redline oil in the gearbox and change all fluids, use decent engine oil.

Compression test.

Change the turbos if you really want to be sure they are in good nick.

Clean injectors

New fuel pump

Install a reliable oil pressure guage

Get your Air/fuel mixtures checked on a dyno

And i too am a believer that any RB engine is good for over 300'000 if taken care of.

Should you keep it? sure! r32 gtr is such a good bit of kit. preventative maintenance can save you the big bucks.

good post hazerb30

Prevention is the key. New parts like fuel pumps and AFR readouts can prevent these nasty failings that lead to a rebuild in the first place due to owners neglecting to upkeep the car in great condition.

Look after her and she'll look after you haha

don't lose sleep.

and if it ever breaks and needs a rebuild, and the car is only STREET DRIVEN, do a standard rebuild and don't start saying "well since it's already apart, might as well......."

that's where it doubles in cost.

well that just makes me depressed... again haha

and its not double the cost, its more like triple

Its really funny,everyone has a 130,000 km gtr32(89) LOL.

Let me see....20 years old....divided by 130,000....6500KM's per year....

Let me do the calculations again...yes.....6500kms a year. :blink: <I believe in him too.

Fuel pumps,oil pumps and all the other things discused on this Forum just don't give up

at 130,000 Kms...wake up and smell the roses boys.

OK..fun stuff over...

Drive the car until its motor dies.......it is more cheaper fixing it once than fixing things so it does not die.

But if you want:

Get all your oils replaced...gear/box ,engine,brake etc etc.......use the one's mentioned in this forum that have

made people happy.

Change your fuel pump,timing belt and turbo's.....not to ceramic second hand ones...you have no idea how many k's they have done either...

My thoughts on Turbo's...throw them out after 100,000..in your case..you are at least 30000 overdue..

Buy -7 or -9's in the garrett...bolt on and don't look back

Happy motoring.

-9s?

Thought you were an advocate for -5s Tekin :O

Yes I am Trav..like most with them bolted on... :blink: .

But then again...I have upgraded nearly everything.

Stock Engine and no supporting mods.....-5's will be an overkill.

My 89 shitter has got service history every year since 50'000kms... so yeh. legit Km's. It may all be in jap and i cant read a word of it but at least i know its 130k :)

So yeh.. your wrong. im sure im not the only one

Since 50K...what did it do between 0 to 50K :D ...200K.

If your service history is lost or began at 50K...they have tampered with the books.

If you have your service history of the car since new...stamped and written in the owners manual

then you might be right....I have a mechanic that can stamp a few services in with made up odometer readings.

Anyway,good luck with your car and keep up the services if you intend to drive it daily.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As you're looking at using a Link ECU, then large injectors are not a problem. But there's not really any need to go 1000s on an RB20 unless you're planning >>600HP on E85, which would seem unlikely. There are other options for injectors. The Xspurt ones are available from a number of places and you can get them in the mid 600s and 725cc, which is probably a sensible place to be. These are all EV14 based. If you are not using the stock AFM (at all, which would be the case with a Link) then a large turbo intake pipe to suit the ATR turbos is not an obstacle, so you should use one instead of a highflow. Results will be better.
    • Hey guys,  I'm after some advice and this here is the best place to get it imo. I was a member a looong time ago under another account, with a lost email address. Its nice to jump back on and see some of the same names still giving good advice.  I mothballed my car when i moved to perth in 2013, and after getting towed across the nullabor a few times it has officially done more km's on a trailer than under its own power. Now that i have started the process of tidying up and modifying it, i see the fruit available (and the fruiterers selling the produce) is different than back in the day. hence my questions, as i used to 'know' what to get and now, i'm not so sure. Engine wise the car (92 gtst) has a walbro 255, k+n, fmic, cam gears and and turbo back 3"exhaust. Wish list is a Hypergear high flow or ATR43G1, Link G4x and some newer injectors before a tune up. My goals are modest, only low 200's power wise. i know i could achieve this with less, but i've been swapping out old for new where i can. Every cooling hose has been replaced, along with mani gaskets, WP, thermostat and radiator, fuel pump and timing belt, tensioner and idler, and i rebuilt the steering rack. Regarding the injectors, the fruiterers all seem to sell what used to be considered quite large injectors. There are a lot of options for bosch 1000cc EV14's, and i would like to know if that is a suitable choice for my build. Is modern injector design good enough to run these at the low duty cycles that i likely would be? is there a downside to running a too large injector these days? or, would there be an upside to running a smaller injector at higher duty cycle? I can see that there are smaller injectors still available, but the ones i have seen specifically marketed for RB's are pretty large (see: https://golebysparts.au/collections/fuel-rail-injector-kits/products/nissan-rb20-fuel-rail-bosch-980cc-1150cc-injectors-turbosmart-fpr800-regulator-kit), and i dont know enough about them to say one not marketed for RB's would fit or not. I have searched the forums, and amongst all the posts on older tech, I did see gtsboy recommend EV14's, but no size was mentioned... again, i'm not clear on if the smaller size bosch injectors are also EV14's as they do look similar.  also, if someone can recommend a tuner familiar with RB's in the Geelong or West Melbourne area i'd appreciate it. Thanks in advance guys. Cheers, Rowdy  
    • FWIW the depth of the groove in the rubber pad is not super essential, the blocks are rubber and squish a bit. If you are worried an angle grinder will make a deeper groove quick smart
    • I mean, if you were to move the jacking points away from the original location, that is, away from the wheels and closer to the centreline of the car, then it will be more likely to overbalance and tip off the supports. Same as we talked about before. I was talking about moving for-aft. If the sill is bent outward or inward, then the car would obviously look unstraight from the outside. Hopefully that hasn't happened either. Again, you can do comparative measurements from the chassis rails to see if there is much deflection.
    • Can you elaborate what you mean with your first sentence? I meant move as in the bulge kinda seemed like it got pulled "outward" meaning it got pulled down and to the side with the jacking rail itself, so the load bearing bulge now sits lower than usual and is not level with the sill on the other side of the jack point. Either that or the jacking rail just got pushed in a good bit.
×
×
  • Create New...