Microtech Setting Injectors

[ragex]

i have a microtech lt12 on the way, i just want to know canu select the size of the injectors in the software? also any one know if i can fit gtr injectors onto a rb23det ?

[Adriano]

i have a microtech lt12 on the way, i just want to know canu select the size of the injectors in the software? also any one know if i can fit gtr injectors onto a rb23det ?

No and Yes

[ragex]

so how do u change the injectors with micortech then?

[Strik3r]

i dont think you have to 'change' the setting. You just start tuning and tell the injectors what percentage to open for various load points. Assuming its a new one that you ordered for an rb20 / rb25, it should have a fairly rich base tune on it. Your tuner should be able to sort all of this out for you. If you have to get it from the workshop to the tuner, then it becomes a bit trickier ^_^.

[Dobz]

the microtech's come with a base tune that suits the engine it's going on, in your case it will be for a stock RB20det how it's setup from factory eg. stock cooler, injectors etc.

your best off keeping the stock injectors in and maxing them out before upgrading otherwise you might be waisting your money on injectors you don't need depending on your turbo setup.

to me the best benchmark for starting off with microtech is everything stock apart from a fmic and 3" exhaust and only when say u wanted more power with an upgrade turbo and a bit more boost only then you'd really need to think about upgrading injectors.