Roll Call Rb25det Owners With Restrictors Fitted

[1400r]

got advised when ordering the restrictors today from highoctane that they wouldnt run them in a 25det vct head

I told them how most of you guys are blocking off the rear feed and running one only up the front

and that my plan was just to run one in each however they still didn't like the idea

I'd really like to hear from anyone who's had them fitted for over 12mths with no dramas

Im fairly sure I'll have no drama's as a mates rb20 does three laps and fills his 600ml catch can over and over again

so seems like theres plenty of flow in the rb's

Edited August 30, 2007 by 1400r

[R31Nismoid]

No drama here, i did 7,000 HARD km's.

Drag days, street, dyno. Never driven sedately at all with 350rwkw.

Motor was apart in '06 as part of sale. Not a problem.

[dangerman4]

yep same here

[Abo Bob]

I wish I had restrictors.

[GTRgeoff]

Simple, find a workshop that will work to your satisfaction. I have them in the racecar which is a 26/30 combo. Not a hint of noise.

[1400r]

^ fitting them myself with the help of a qualified mechanic

I figured Highoctane would be in the know

thanks for the replies guys Im going ahead with fitting them

Edited August 30, 2007 by 1400r

[dangerman4]

there not hard to fit.

get a soft punch, slightly smaller then the restrictor.

tap the standard restrictors down into the block,

and then carefully tap the new ones in on top of the standard ones.

done.

[1400r]

thanks dangerman always think of danger mouse when I see your name lol

Im fitting tomei inlet cam/adj cam gear and tomei 1.5 mm h/g at the same time as the restrictors so I wanna make sure I get it right hence mechanic mate

[dangerman4]

just because he is a mechanic, dont assume he knows everything.

past experience is worth 100x more then a educated guess.

keep that in the back of your mind and you will be fine.

If anything dosent look right, post it up on here and someone will help you thru.

when your putting your motor together and your keen to get it going,

dont guess / rush on something your not sure of, cause it could cost you dearly in the long run.

[dangerman4]

Im fitting tomei inlet cam/adj cam gear

please explain the above!

just a intake cam?

and a exhaust cam gear?

[1400r]

yep pretty much got the cam for free when the boss worked out it wouldnt fit on his 32 25de +T

got a pair of adj cam gears for $20 or something so fig I might as well through one on