Jump to content
SAU Community

Recommended Posts

hey everyone my cars just recently been painted matt black and im wondering how to keep it clean, cuz the color duznt have a clear coat which means no protection.. which sort of rules out goin to carlovers cuz the gurney might strip the paint off, would it best just to get a very soft cloth n just dampen it and wipe the car down????

thanks

josh

Link to comment
https://www.sau.com.au/forums/topic/183025-matt-black/
Share on other sites

I would of given it a coat of clear with matting agent in it, then you get the matt finish but you can clean it the same as any other paint finish, dont think anyone will be able to give you a correct answer on your question, as your not suppose to just coat a car in base coat, its going to attract the moisture and get micro blisters after time, clear coat seal's the base and protects it, like I said giving it a coat of matt clear is your best option.

Edited by DriftyR33
Link to comment
https://www.sau.com.au/forums/topic/183025-matt-black/#findComment-3319240
Share on other sites

Yes you need to use a Matt Clear if you want it to last. If you dont you will see marks all over the car from people touching it etc. Moisture will be absorbed by the paint causing the paint to flake off and rust the surface. Its like people driving around with cars in primer, when they go to topcoat the topcoat doesnt adhere due to all the moisture the primer has taken in...

In Speed magazine there was an R33 GTR in matt black, looked tough as, in that article they also say they were changing the paint to a satin finish as marks appear to easy on the flat.

Satin and Matt are different..

Link to comment
https://www.sau.com.au/forums/topic/183025-matt-black/#findComment-3322995
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...