Jump to content
SAU Community

Recommended Posts

RB20/25/26 knock sensors are all the same.

I'm after a pair also. :S

How are yours playing up? My original set wouldn't read any higher than 1 knock on the pfc.

This other set I have in won't read higher than ~14.

I've put the multimeter on to them and they have gone open circuit? i think. Constantly reading 13-14volts.

RB20/25/26 knock sensors are all the same.

I'm after a pair also. :S

How are yours playing up? My original set wouldn't read any higher than 1 knock on the pfc.

This other set I have in won't read higher than ~14.

I've put the multimeter on to them and they have gone open circuit? i think. Constantly reading 13-14volts.

one was completely melted & the other got lost during a year long rebuild. I thought the best way to test them is to tap the block lightly with a hammer and u should be able to hear the timing retard.

If you have the engine manual you can get a rough idea if they are working as there's a small test you can perform with a multimeter.

Tapping the block may not work as the knock sensors only hear between 2 frequency's.

Apart from that.. You have a powerfc with a knock readout. Let us know if the block tap works. :D

RB20/25/26 knock sensors are all the same.

I'm after a pair also. :S

How are yours playing up? My original set wouldn't read any higher than 1 knock on the pfc.

This other set I have in won't read higher than ~14.

I've put the multimeter on to them and they have gone open circuit? i think. Constantly reading 13-14volts.

Just found out through a guy who imports the sensors new that rb20/25 sensors are heaps defferent from rb26. the 20/25 ones come straight out with round green plug on the end and the 26 ones are round with a bolt through the middle and a square 2 pin plug coming off at 45 degrees. I think the 26 ones are the same as sr20.

If your after the 20/25 ones i know someone with a couple on a dead motor.

I'll thank a couple of different wreckers for that incorrect information. :rofl:

Cheers for the heads up.

How much can you get the new sensors for? I know the sensors you are talking of as I've seen them on a lot of the newer nissans and sr20dets.

The 90's maxima's run them also. BMW's almost everything. :)

So I have 4 knock sensors to suit an rb20/25. :S

I'll thank a couple of different wreckers for that incorrect information. :rofl:

Cheers for the heads up.

How much can you get the new sensors for? I know the sensors you are talking of as I've seen them on a lot of the newer nissans and sr20dets.

The 90's maxima's run them also. BMW's almost everything. :)

So I have 4 knock sensors to suit an rb20/25. :S

I can get the RB26 ones through nissan trade at $300 and aftermarket for 250. Rang nissan and they reckon the part no's for sr20 ones is different to rb26 but i found some sr ones at a wrecker for 45 ea and they look identical. gonna put them in and get this thing running at last. yeah maxima's also run them as well as a few other nissans i cant think of right now.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hello everyone. I believe I have s1 headlights but I just wanted to make sure and getting confirmation from you all. Thanks in advance for your help!
    • Crazy how good the aero bar looks compared to the stock one
    • Yes, but you will need to rewire all the things that are different. CAS, coils, etc. Yes, but there is no IAT. What? You can use anything you like. It just has to be hooked up so that it will work.     Or are you wanting to just plug and play without having to do any thinking/work?
    • It's been a little over a decade since I bought the S15. As I did on my socials, I'll share some of my favorite pictures from over the years further below. If you haven't realised, pretty much all the pictures in my posts are ones I've taken.  In terms of updates, I don't have pictures, but I acquired a near-perfect pair of fog lights from a friend of mine, so those got swapped in for the pair I already had. As for the JZX110, I just got it back from being fixed. A few weeks back, I was on the highway when I suddenly drove over something with very little time to react. It was probably the size of a soccer ball, but it went under the car and banged into the underside pretty loudly. I pulled over and realized the fluid leaking was fuel, and of course, it was right near my exhaust. This required replacing the fuel tank. If you happen to be in the same predicament, thankfully this car shares a fuel tank with the JZS171, IS200, and IS300, so it wasn't too painful to replace. Enjoy some pictures as mentioned above, including the carnage from the fuel tank and a bonus picture I came across which shows how ridiculously shiny the Bugels are on the 110. So many more pictures I could share of the S15 but this will do for today, enjoy. 
    • Welcome.  Was the mistake the car, or joining us? 😏
×
×
  • Create New...