Jump to content
SAU Community

Recommended Posts

I'm going to be changing my gearbox and diff oil this weekend and I've read really good things about Redline Shockproof.

What type do I want to get for my gearbox and diff? Heavy or Lightweight?

I got quoted $115 for a 3.8 litre bottle from "Performance Wholesale" at Slacks Creek (Brisbane). Does this sound right? Will this be all I need? I read somewhere that the gearbox takes 2.4 litres and the diff takes 1.4 so it should work out ok. Can anyone confirm?

Edited by Simmo1985
Link to comment
https://www.sau.com.au/forums/topic/183077-which-type-of-redline-oil-to-use/
Share on other sites

I was told that shockproof will make the LSD shudder a bit. I used lightweight shockproof in the front (open) diff and gearbox, and redline 75-90 in the rear diff. Just make sure that whatever you get for the rear diff is LSD friendly. Also, you should use a GL-4 in the gearbox and a GL-5 in the diffs.

what do you guys recommend for a Cusco 2way? and shock proof for the gearbox.? light or heavy? the 2nd and 3rd are a bit crunchy when cold..

Lightweight shockproof is often recommended for tired R32/R33 gearboxes. Dunno about the diff - ask Redline for a recommendation here

  • 3 weeks later...

i recently put redline heavy duty shock proof (i think thats what its called) in my gearbox. i havent felt any shudders so to speak but it is a little bit more difficult to shift into gear. espcially 1st when it is cold.

is this normal? my mechanic said this was the best stuff around.

i use ls140 with ford motorsport additive in my kaaz 2way so i dont see why it wouldnt work in a cusco. as for gearbox i use 75/90. dont see the point in using expensive shit when i'll only change it in 30,000kms

dont see the point in using expensive shit when i'll only change it in 30,000kms

The point is;

- You'll be better protected during those 30,00kms (and beyond)

- You dont have to change it until you get to 100,000kms

i recently put redline heavy duty shock proof (i think thats what its called) in my gearbox. i havent felt any shudders so to speak but it is a little bit more difficult to shift into gear. espcially 1st when it is cold.

is this normal? my mechanic said this was the best stuff around.

No its shouldnt be more difficult to shift. The common recommendation is lightweight shockproof, not heavy. Perhaps that's the problem.

Shudders would only occur in LSD diffs, not gearboxes.

No its shouldnt be more difficult to shift. The common recommendation is lightweight shockproof, not heavy. Perhaps that's the problem.

Shudders would only occur in LSD diffs, not gearboxes.

Sorry i didnt get the shudder and diff connection

yeh well it definitly is alot harder to push the gearstick into gear. but like u say it is probably because its a more viscous oil.

other than that it is alot smoother since i changed the oil.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would again like too thank Matt for his help in me sourcing the detachable hard top for the little red car, without Matt's assistance in inspecting it and locking it down, I can guarantee it would have sold before I could get up to see it,  and as that was the only available NC hardtop in Australia, I consider myself extremely lucky on multiple levels To say I'm more that happy would be an understatement And, it is 100% water tight, I drove through torrential rain coming back south, and by torrential, they type of rain that doing 40kph in a 110kph zone was a real thing, and even then, the standing water on the Hwy was deep enough to throw waves I'm also more than happy that the huge "BEASTS" that Matt calls dogs didn't eat me for lunch, I'm sure the sniffs and licks were more to "taste test" me, over being to friendly Now to work out what colour to get it painted, panel match, or gloss black........first world problems are real
    • Actually I might have figured out. Looks like there is a tab according to google images but it's hidden. Silly me.
    • No clips on this one like the other connector. Only that red tab that I can push slightly up.
    • For any loom connector that has an obvious release that resists pushing far enough to unclip, just spray some silicone lube into it. You might also benefit from using a bent screwdriver or small pick to push in the right place at the right angle.
    • Hey all, I went to try and fix my indicator not canceling, but I couldn't remove the clockspring cable under the column so I could twist that green thin. Anyone know how to remove this cable? I see this red tab but didn't have any luck. I was thinking of unscrewing it but wasn't sure if it would cause issues. I did notice for my indicator stalk, 2 out of 3 cables were plugged in but the last cable wouldn't fit in the stalk. I'm getting it's for fog lights. It was like this when I originally pulled it off.  
×
×
  • Create New...