Jump to content
SAU Community

Recommended Posts

hi wondering if anyone has had this kind of problem on there r33 gts-t my revs started going up and down alot just out the blue when idle i thought it must be the afm i have arranged to sort one out in 2 weeks but ive found another problem now and a again when driving my mph drops even if my foots to the floor total loss of power than can come back on and off again and acts like its going to stall as it gets to low mph engine cuts off as if the key is in mid position lights come on ect no power steering could this be something with the afm or is it a fuel pump issue thanks for your time

Edited by johnwd
Link to comment
https://www.sau.com.au/forums/topic/183190-engine-cutting-off/
Share on other sites

I had this problem recently with the idle hunting and then dying turned out to be the battery wasnt that great and when the alarm was set it emptied it abit too much.That tripped the computer too much and wrecked it. but airflow meter is a definate possibility. if you know someone with a skyline switch the airflow meter over.

Try checking your fuel filter, leads and spark plugs. The fuel pump could also be the cause - however problems with the fuel pump tend to be less frequent in regards to the symptoms you have described.

took the afm out last night and cleaned it up as much as i could the mesh was black with muck so did that too it seemed to help alot there was alot less popping on the exhaust so i guess that not as much fuel is going through im going to attempt to re solder some of the pins and see if that brings it back to life , but so far looks like it is the afm due to how i havent had the problem since i cleaned it

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes...but look at the numbers. There is a tiny tiny fraction of the number of Joules available, compared to what is used/needed. Just because things are "possible" doesn't make them meaningful.
    • Thanks for taking the time to post that ! If anything changes or happens please do update us. 
    • Somehow Vertimass/Oak Ridge National Labs has figured out a catalyst that can convert ethanol into C9-C10 hydrocarbons in basically a single step without ending up with a bunch of ethylene or similar waste products: https://patents.google.com/patent/WO2023224867A1/en I still don't think anything like this will keep us from needing to transition to EVs regardless along with all kinds of other electrification, but things like this will go a long way towards alleviating the problem of how to electrify things like planes. Renewable diesel is seemingly an easier problem as well, Chevron is already running refineries for the stuff and the primary feedstock is tallow and other waste fats from agriculture.
    • Ok so I have sorted everything with my uniclutch and  i can offer up a bit of feedback and some things that might help others.    I found problems with factory damper line. Weird shit and had trouble with peddle adjustment    I used this https://au.gktech.com/products/r33-gts-t-skyline-braided-clutch-line?_pos=2&_sid=22b01b9b9&_ss=r Also when adjusting peddle leave a bit of play. You can get into a over stroke condition easy.. Make sure you can push the slave forward after adjusting to confirm fluid can return to master then you will need to pump it up heaps…..not sure why but that’s how it is.    last thing the splined adapter is machined perfectly. If your input shaft is old like mine was I would put a bit of valve grinding paste on it and stroke it like a 15 year old. Just to give it a tad more clearance and to better match it to the spline.    reason is on a near flat shift I have had situation where the peddle returns a millisecond after you lift from the clutch. No slip or anything but I reckon this is due to tolerance on the spline being way tighter than stock clutch and binding for a sec. I think this will go away but also my spline was old. Box is old so I guess I should have checked better. It’s a super neat fit.    it feels light as and holds awesome without any noise    
    • My Fuga Hybrid is JDM, 2014 model but very similar to the V37 from the looks of things..same platform just physically larger and very comfortab;e
×
×
  • Create New...