Jump to content
SAU Community

R32 Rb25de Head, Q45 Afm, Blitz Turbo Timer, R33 Gtr Parts, Apexi Suspension, Updated 21/1/08 Prices Dropped!


Recommended Posts

Hey all,

Got a lot of stuff I need to clear from the garage, I need room to work on my project! I’m open to reasonable offers on all parts..

R32 parts:

RB25DE head from a r33, . I am chasing $500 for it. Reasonable offers will be considered. Due to the weight freight will be expensive but I’m willing to arrange it at the buyers expense. Also have a RB30 S1 block for sale.

R33 Gtst Parts

Q45 afm 90mm as new condition $250

Rear seats complete (2 pieces) $80

Rear bar $40

Rear Tail lights, $80 each includes surrounds.

Power Window Switch Drivers side with surround $120 Series two only

Power window switch surround only $40

Drivers window side glass $80

R33 GTS-4 parts

Ignition barrel with rack and genuine Nissan key and all surrounds $200

6x rb25 coil packs with wiring loom and bridge from r33 series 1 $220

Boot lid black no spoiler r33 gts-4 coupe has sound deadening $120

RS-r springs for suspension $140

17 inch Chrome wheels almost new tyres suit 4 stud Nissan. Rears have good rubber fronts are worn. $400

R33 gts-4 rb25de manual gearbox 5 speed twin syncro, looks like the rb25det box with 4wd rear output shaft like a GTR box $400

R33 rear cradle does not have hicas from factory no extra weight of hicas or lock out bars, has better geometry for traction upgrade for 300zx or weight reduction for r33

this is for a bare cradle $200

R33 Vspec GTR Parts:

HKS camshafts in/ex 280 degree 10.2 lift were installed never used $700

Drivers door trim blue insert $50.00,

White exterior Power mirror $60

Standard rb26 twin turbo pipes from cooler to turbo $300 set

Apexi N1 rear coil overs $400, fitted for 40,000kms. no leaks or damage

Blitz full auto turbo timer $120

90mm high flowing cat $150

Nissan S13 Silvia parts

S13 silvia 3 inch catback exhaust VEILSIDE best sounding zorst and rare jasma plated has 2 dents can't be seen on car $440 ono

Misc Parts:

RB30 s1 block crankshaft head will sell cheap

bridgstone turanza er30 tyres x 4 205/55/r16.....6mm tread left on two 7mm on the other two cheap $ 80

Im open to reasonable offers. Need all this stuff gone ASAP I need the space to work on my car! All items are located in Sydneys west. Happy to post the small stuff and can arrange local delivery for a small fee.

Also got a 180sx for sale.. has a bit of damage PM me if interested

Cheers,

  • Replies 59
  • Created
  • Last Reply

Top Posters In This Topic

Can i grab the spoiler without bootlid, $350 (unless the boot will fit an S2 R33 GTST)

  • 2 weeks later...

that is not just your awd controller.. its also got your active diff controller... the unit on top >;P

fyi

  • 2 weeks later...
collin- will not fit an r33 gtst there will be issues with the floor pan.

mad gt4 - it was running in the gtr before it was removed.. and pm sent

The GTR box will fit in a RWD skyline just need a bit of modifying! Ive got a GTR box in a RWD 32. need custom tailshaft, customize the transfercase, modify the mounts in some cases. Spewing bout the box I would have grabbed it if it was for sale bout a month ago. just replaced my one and the new box I got aint nothing special either :D

The GTR box will fit in a RWD skyline just need a bit of modifying! Ive got a GTR box in a RWD 32. need custom tailshaft, customize the transfercase, modify the mounts in some cases. Spewing bout the box I would have grabbed it if it was for sale bout a month ago. just replaced my one and the new box I got aint nothing special either :D

thanks for the info mate.. much appeciated.

the box is much cheaper then a r33 gtst box. its of no use to me as I will be using my existing box for the rb26 conversion..

HI, would you happen to have the under bonnet carpet and the rear side bumper pods?

Sorry mate dont have either of them.. Bonnet lining will go with bonnet.

Hey mate,

How much for the steering wheel on its own? I dont need the other stuff.

Its out of a R33 Series two V Spec, cluster had 80,000 clicks on it. box spins freely, had little to no metal flakes in the oil when drained..

Cheers,

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Ok glad you clarified on the frenchy’s options , I was worried about if my oem hoses would fit the new compressor or not if I just bought the bracket/compressor kit ,  didn’t realize they also sold a larger full conversion kit. Hmm may just go oem in that case then to make it easy only because I plan to sell this car to upgrade to a 32 GTR or 34 GTT.
    • Right, here's a video of the basic operation at least.  This is what you can expect day to day when you turn the car on and it boots from standby.  The only thing from a media point of view I haven't gotten working is for it to autoplay plexamp when it turns on from standby (it works from cold boot) but that's more of a plexamp problem as it will autoplay other music players.  Also attached is my one stray cable.  It's part of the screen's wiring adapters but there's just nowhere for it to go in my car.  I've just now done a bit of research and found a matching port on a 2010-2014 head unit with BOSE.  Mine has no BOSE so that's that case pretty much closed I think.  Plugging in the Infiniti AC panel basically did nothing for me, so that's a dead end as well.  Next port of call is to mess with this CANBUS module and see what I can find from it.  I found this resource containing the DBC files for a 2010+ G37 : https://github.com/icecube45/Dash_InfinitiG37/blob/master/InfinitiG37.dbc I'll now have something to go from when I try to extract my CANBUS data so I can see if the HVAC Mode, Fan Speed, Temperature, etc. match and also the gear shifter position.  It's a pretty big assumption that it's just mismatched CAN signals but considering all the devices in the CAN network are talking to each other (AC can be fully adjusted just with no info on screen) it might be a safe one.  I will report back WhatsApp Video 2025-02-26 at 12.49.10.mp4
    • Thanks for that Paul.  Do you think if I posted a picture you'd be able to remember where it went? 
    • Sorry Duncan, I didn't get a notification for the replies.  Thanks for responding!  It's a full Android device, but does allow you to use CarPlay/AA as well.  This is the one I bought from NaviRS on AliExpress: https://www.aliexpress.com/item/1005006368602668.html?spm=a2g0o.order_list.order_list_main.111.59aa1802JDzQ0E - the 2K 8G-256G CAM variant but it seems to have gone up by £170 since I bought it!  My purchase was £307.14.   It's not the fastest thing in the world but performs perfectly adequately.  It stays on standby unless I disconnect the battery and let it power down, then it's just a fairly standard Android bootup time from cold.  The DSP Equaliser is very nice and made the standard stereo system sound pretty decent compared to the stock screen.  Perhaps I can take a video of it when I get a sec. It *allegedly* supports the reverse camera, but I'm yet to get that working.  It has options for reverse cam (a camera unit can be bought separately) or 360 cameras (also bought separately).  To be fair it doesn't seem to detect that the shifter was put into reverse but I'm working on a theory about this as well.  At the moment I'm going without which is a bit annoying considering the car is an absolute canal barge but so far I haven't caused any damage I'll grab a picture of the wire I'm missing later today when I can get outside.  My theory, by the by, is that not only is the head unit different, but the CANBUS network has different signals for the different years.  I think this because I have a spare AC panel from a newer Infiniti G37 (as opposed to my Nissan panel) which wouldn't control anything except the volume when I had it wired up with the stock system.  I'm going to throw it back in and see if the screen will respond to it.  I've just ordered an arduino CANBUS module so I can have a look at the signals going around the car and see if I can spot anything.  I'm thinking if I can work out what it's expecting vs what it's getting I might be able to translate and relay the signal back but so far just a theory anyway. I also found this on my travels, so far the only one that specifically matches my car: https://www.aliexpress.com/item/1005002822934280.html?spm=a2g0s.imconversation.0.0.33433e5fgttovi If you look at the picture of the before, it has the card reader slot, and the picture of the head unit is exactly the same as the one pictured in my original post.  I asked if they sell the cables separately but sadly they won't.  I didn't want to just buy this one because it's a super old Android version and only dual core - likely slow as hell. 
    • As above, you did refill the coolant and burp the system before running it again didn't you?
×
×
  • Create New...