Jump to content
SAU Community

Sau Vic - Help Don1 Find The Right Workshop


Recommended Posts

Good Afternoon Skylines Australia,

My 1990 R32 GT-R has been getting a full engine rebuild, forged pistons and N1s at RE Customs for some time now and I have been totally happy with their service and results, and would wholeheartedly recommend them to anyone.

The problem is now my engine is all fixed up I want to have a good hard look at the interior and exterior - maybe get a paint job, new boot, some new seats, a new wheel etc. I am also looking to get a good alarm system installed.

RE Customs only do engine work so I am looking for advice about what might be a few good workshops to look into. I looked through the workshops thread but couldn't really find much. If I can take my car to one shop and get all of the interior/exterior and alarm taken care of then that would be great - but any info on any workshops that do any of this is most appreciated.

Thanks in advance to anybody who can point me in the right direction.

Dude... 3 posts in 20mins lol.

Spray work - Micolour in Cheltenham have been doing excellent work.

9555 8011/0713 815 810

As for other things like seats etc. Its more a personal thing. Your better to shop around and see what suits you best really

Wheels. I dont think you can go past Rampant (Aaron).

www.rampant.net.au

There are a few places to get you started, good luck with it all

DT Panels for any bodywork. They are in Chingvale across the road from the station

Agreed! :) Vu does awesome work!!! Just about to get another of my cars painted by him.

PM: evilsub on here, thats him!

http://www.stylyn.com/

For car alarm installation.

Recommended by Chris Rogers (check out audio section if you dont know him)

Spent about 6 hours installing my alarm into the car. Removing whole dash etc etc

Know's what he is doing :)

Give em a call

dont mean to hijack and start up another thread but on the same note, anyone know of a good insurance pannel workshop in/near springy? Doesnt have to specialise in imports like DT Pannels. The family corolla got can-opened by a 4x4 reversing out and not looking.

thanks.

edit...never mind its all been sorted. :)

Thanks heaps for the advice!!! I'll give most of them a call and see what they can do. Looks like it might be smartest to take it different places for the exterior, interior and alarm respectively.

Heres what I got....

Exterior/Spray Shops

DT Panels

Micolour

Alarms/Audio

http://www.stylyn.com/

Interior

???????????

Try Con or Andrew at C&A Auto Fashion in Blackburn.

Do those guys do interiors? Or just exterior?

Just take out your interior. its cool.

Do you mean I should rip out my entire interior and put a whole new dash in? How much is that gonna cost me?? Like millions, right?

As for other things like seats etc. Its more a personal thing. Your better to shop around and see what suits you best really

I'm happy to do that, but pretty clueless on how to "shop around". Where would I look to find a bunch of places that sell/install seats and dashes etc?

Thanks again guys!!

Also Alarms.

If you become a member of SAU-Vic, it will give you access to heavily discounted Alarm installation by a friend of mine who is a supporter of the club :)

It offsets the cost of membership easily, so there are MANY bonuses just there.

They can probably do both. Ask them.

Thanks mate I will. Theyre in the yellow pages? Or do you have a number?

Also Alarms.

If you become a member of SAU-Vic, it will give you access to heavily discounted Alarm installation by a friend of mine who is a supporter of the club :)

It offsets the cost of membership easily, so there are MANY bonuses just there.

Sweet I'll check it out. Does he also do audio/turbo timer installs? Cause I'd probably get them done at once.

Last time: Is there anything more anyone can tell me about how I can track down a bunch of people that do interior work on cars? Like where I should look. I got no friggin clue.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...