Jump to content
SAU Community

Recommended Posts

You will find that your lights are crazed ( they have tiny little cracks on the lens from exposure to the sun) nothing short of changing them can fix it . Put your lights on at night and look in the lens you will the tiny little cracks . Polishing them fixes it for a little while, well makes them look better, not realy fixes them.

Mine are pretty bad on my R33, so i was going to replace them, but everywhere i inquire they all want anywhere from 350 to 450 per head light.

Is there anywhere I can get a set from that is not going to hurt my hip pocket to much. 700-900 for a pair of second hand oem headlights is a bit steep for me.....unless im cheap :D

I see some on US Ebay second hand ones that start low, but unsure if they will comply with AU standards?

Is it possible just to replace the headlight lenses wit new ones?? I know they're sealed on,

but are there places that heat off the old one and can fit a new one on? Can you buy just the lenses from nissan?

S2 Headlights new from nissan are $500+ each

Mine are pretty bad on my R33, so i was going to replace them, but everywhere i inquire they all want anywhere from 350 to 450 per head light.

Is there anywhere I can get a set from that is not going to hurt my hip pocket to much. 700-900 for a pair of second hand oem headlights is a bit steep for me.....unless im cheap :D

I see some on US Ebay second hand ones that start low, but unsure if they will comply with AU standards?

I have a good pair, no fogging and nothing broken you can have them for $350.

Get some really fine sandpaper, and some warm soapy water, and sand the headlights until you get a milky residue.

You can repeat again with a more corse paper, but still really fine.

Then cut and polish it with some good polish.

Has worked for me before, so give that a go.

Takes away the hazey yellow layer, and makes them pretty damn clear.

My xenons have gas marks on the inside of the lens, and from what i've heard the lights are totally sealed so apart from using a heat gun or something to open em up anyone else opened R34 len's ot cleaning the inside of them?

I use Meguires PlastX. It's a clear plastic polish specially designed for faded plastic and works pretty well. A few people i know thought i replaced the headlight. For $18 you cant really fault it except that you have to re-apply it every 1-2 months.

Edited by quiksta

lol 18 $$$$$$$$$$$$$

i just use 20 cents worth of polish and a bit of wax and it last for 2 months

has anyone else tried the wetrub with 1500 like mentioned earlier?

there is a new 29 $ dollar headlight kit i seen in supercheap but cant rem the company?

I know for the supras theres a mob that makes glass lenses for them. You can unseal the standard ones with a heat gun or oven or something, then replace the lens with a glass one and never worry about fading.

Any one made like a replacement glass lens for the skyline head lights instead of plastic??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
    • From memory, on the R33 GTSt at least, while everyone says "It's not adjustable", I found when I changed clutches in mine, it just needed a small adjustment on the rod length. But be very wary here, as you could end up trying to push the pushrod in the master too far, or blowing out the slave.   Most likely though, if the master/slave isn't bypassing internally or leaking out, then the throw out is the wrong height compared to the fingers on the clutch, so when it moves to disengage the clutch, it isn't 100% disengaged. You can check part of this out too by jacking the car up, having the engine running, put your foot on the clutch and try to engage 1st gear. If it goes in pretty easy (Compared to the ground) and/or the wheels start turning a fair bit and it takes a bit too much brake pedal to bring them back to a stop, this is likely the issue.  I'm not sure if you can adjust the height of the forks etc in these though, it's been that long since I've touched any RB gearbox.
    • That's all good, I thought I was missing some interesting feature! Maybe @PranK can double check if that is something that is meant to be operating or not.
    • I hope that is not something that bad. From what i remember he said that only first gear is "hard" to get in and that he has couple of ideas what to try next but idk 😕  hope it is not gearbox out. I will let you know.
    • If it's not the hydraulics, it is probably gearbox back out. Usually as per @Duncan's post, or otherwise associated with not getting the throwout fork positioned correctly. All the way up to catastrophically bolting shit back together without it being aligned properly and wrecking the clutch/input shaft/flywheel/something else.
×
×
  • Create New...