Jump to content
SAU Community

Chasing R33 Gtst Drivers Side Window Motor

phee

By phee,
in Classifieds

 Share

Recommended Posts

phee Experienced

phee

Posted
Posted

Guys / Girls,

I am preping my car to sell so I am fixing all the misc items that I couldn't be bothered fixing before now, so does anyone have an R33 drivers side window motor that I could take off your hands? Please let me know, if reasonable I'll pay postage as it will still probaby work out cheaper than getting one from Nissan.

Thanks :ninja:

Phee

_MRR33 Experienced

_MRR33

Posted
Posted

Have you tried Import Wrecking Yards? Try the yellow pages there's some in there ...JustJap is another one that can get there hands on one.

They're around th $100 mark.

phee Experienced

phee

Posted
  • Author
Posted

No I live in a mining town in the middle of bum-f**k-idee-hoe so it's really hard trying to get this gear out here without being ripped off.

I'll try JustJap and see what they have to say, thanks for the tip.

Mud Grand Master

Mud

Posted
Posted

Are you certain its the motor?

There are three things that can stop the window working.

1. Switch

2. Relay

3. Motor

there are 3 different types of relay also for Series 1, 1.5 and 2.

I thought the swicthes or the motor was stuffed in mine, after a lot of swapping parts and testing, it turned out to be the relay.

I would suggest swapping some bits to diagnose the fault before buying bits.

 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • MBS206
      NC MX5

      By MBS206 · Posted

      There's a good German place in Brisbane if youre up for the drive 😛
    • Dose Pipe Sutututu
      NC MX5

      By Dose Pipe Sutututu · Posted

      The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • joshuaho96
      R33 GTR running -9 with no tune

      By joshuaho96 · Posted

      Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
×
×
  • Create New...