Jump to content
SAU Community

Recommended Posts

  • Replies 682
  • Created
  • Last Reply

Top Posters In This Topic

nice pic that Dave took with the front wheels off the deck on launch.

post6151250689717814548.jpg

nice pic paul - TWOOGLE must have so much more potential considering that your suspension isnt even setup.

what did it end up making awkw? im sure its somewhere in this thread but reading thru almost 30pages seems painful

Thanks Rob. Did a 1.38 the run before and blew the turbo outlet pipe off changing from 1st to 2nd...still ran 9.8

Mate it went 6.0 @ 114 to 1/2 track. What do you think it is capable of at that boost/power level?

Looking back I did 1.39 in the drag-r at 1740kg on ET streets so Meremere's not toooo bad off the line I suppose, its the rest of the roller coaster ride and the bumps and lack of top end grip thats the problem, Reece runs 3-4 10th quicker in Aussie easy, he told me I'd be shocked how much power you can use from 1/2 track compared with here.

On the aborted 9.7 run in the drag-r I had 5.something @ 117mph at 1/2 track and that car has gone on to run 9.4 @ 155mph on a pretty average air frield runway so you'd have to be talking 9.40-9.50 with 6.0 @ 114???

Rob

9.4 ??? on low boost?

9.4 on 29psi

turned it up 3 psi and blew the tyres off it (smoked all four right through 1st and part through 2nd) but still ran 9.7. Tyre pressures were a little high and the suspension needs tweaking before we can run more power. Its scary to think we have around 6-7 psi up our sleeve which equates to around 130hp at the tyres. Ive discussed a custom rear cradle with a supplier today with adjustable pick-up points which may be handy.

the 60' times on 29psi ranged from 1.39 all the way down to 1.36. Lots of fun :blink:

Edited by DiRTgarage

10/10 for the sig Paul your a talented boy arent you. I agree with Marko a little bit of smoke would ne nice. Or how about have 2 or 3 different sequences one staging the R doing a massive burnout etc etc you know what i mean.

Congrats Paul on another PB. I am sure that you will soon see the magic 8 pass :blink:

Mark ran 9.38 with the same set-up (turbo kit and box) with 100whp more using the clutch to shift gears. Changed to flatshifting and went to 9.0...so at least 1/10th saved on each shift as well as the added momentum gained with the increase in MPH.

The maths looks to be in my favour for a high 8...but theory doesn't always carry into practice easily.

Edited by DiRTgarage
Paul was good to meet you and was impressed when i saw you run the 9.4, pitty you broke out. did you manage to grab the next gear after all.

yes...was its pass with the car shifting properly, went into 4th like a hot knife into butter. I dont press anything other than the accelerator pedal when going through the traps...this back off when in front or pressing the brakes before the traps shits me. I should have given myself a little more headroom with the dial-in...i first decided to dial 9.47 a 1/10th quicker than my PB which was 9.57...but changed to 9.50. So it wouldn't have mattered either way. Next event ill have more of an idea and be able to bracket race it a bit better. Smashed him at the tree with a 0.02 reaction and the race was over at 1/2 track...he should have bought me a beer for letting him win.

Edited by DiRTgarage

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Also had a look at the Nissan JP website looks like the 400r has a slightly shorter ratio than than the regular V37 3.133 VS 2.937 which from a guy who has driven both 3.69 vs 4.11 ratios in the S15 is bugger all. Seems that the AUTO Z runs the same ratio as the 400R but can't find any info as to if its an open or LSD? More often than not the auto LSD is open
    • Do not replace the power steering lines with this stuff. If it's anything like the Chase Bays stuff it will leak and be worse than stock. The reason why the reservoir is on the LH/passenger side of the car is because that's just where the reservoir was most convenient to fit. Don't overthink this stuff. The intake/cold side of the engine is pretty busy on these cars. And again, the hardpipe is designed to be a janky power steering cooler. In theory you can replace it with a real power steering cooler but that's really only for track use where boiling the fluid is a distinct possibility. Start with the low pressure lines feeding the pump from the reservoir. Make sure there isn't a bunch of junk in the reservoir filter. Be careful to not get ATF all over the engine bay. I hate dealing with ATF spills, you can clean it up and the slightest crevice will still release more oil that can still drip over time. You also want to inspect for leaks before you make a mess and can't tell what happened. Most likely you have a leak somewhere that is allowing fluid out and air in. Failing that it's allowing air in but not fluid out. Only place I can really see that happening is on the low pressure side because the pump will pull a slight vacuum to draw fluid in. Everything after the pump is high pressure or lower pressure, approaching atmospheric by the time it returns to the reservoir.
    • I did a skidpan night at SMSP this week, it was much cheaper than $350. But yeah, you need to slap an LSD in that thing.  I put an OS Giken in the 370Z and it's f**king MARVELOUS even compared to Nissan's viscous LSD. So you're saying it's free now that it's a housing estate? 😂
    • Nah, the car seems to run exactly as it did prior, in saying this it does "seem" to be better down low, like more eager to rev, but that may be 100% placebo effect from intake noise But, I'm not worried about it at all, in the end it is a fairly low compression NA engine that has a well shrouded intake,  if it is getting hotter IAT I cannot notice anything negative performance wise from the seat of my pants thrashing it about on the street or sitting in traffic, so meh, car now now makes induction noise so I'm happy
    • Do you have an IAT sensor? It's worth checking it to see. You may be suprised how little gap you actually need to flood your engine with hot air. (I tape up my airbox for a reason) :p
×
×
  • Create New...