Jump to content
SAU Community

Recommended Posts

Hey,

Im currently in the market for a new clutch for my R32 gtst (which will only see 200kw atw in the future)

With so many clutches on the market, with different names and parts, which one would be the best/easiest for daily driving?

So far in mind are;

-----------------------------

Exedy H/D Clutch - Genuine

Exedy H/D Clutch with Pressure plate rated @ 1050kg

Exedy Sports Organic Clutch - Genuine

Exedy Sports Organic with NKK Pressure Plate

Exedy 5 puk Button Kit with Pressure plate rated @ 1200kg

----------------------------

I heard the Sports organic is a much easier clutch for driving than the H/D and also holds more power.

Although not sure where the 5puk button kit falls into this comparison

Thanks

Patrick

Link to comment
https://www.sau.com.au/forums/topic/183640-clutch-confusion1/
Share on other sites

Have had the Exedy HD with stronger pressure plate fitted in my 32 GTST & it had a nice feel to it. Slightly heavier than stock but not enough to even bother my mum. However, on a fairly stock RB20DET (exhaust, intercooler & boost), I managed to kill it in 12 months & 13,000 km's. I am a very hard driver but I was still expecting more... Have now fitted an Exedy un-cushioned 5-puck brass-button clutch & I love it! Stiff as hell, with little to no play in it, it sure isnt for everyone but is a lot easier to drive than I would have imagined. Just takes a little getting used to...

Is there a lot of difference in pedel feel between 800kg and 1000kg pressure plate?

It's either Exedy HD w/ 1050kg PBR plate

OR

Exedy HD w/ 800kg Exedy plate

Only $100 price difference between them, 800kg easier to drive in traffic or no difference between the two pressure plate loads?

Thanks again

Yo dude, thought I might add that I put a new clutch in my 4 door r32 drifter not long ago. The clutch was from CBA( clutch and brakes australia ) and cost me $500. It was a ceramic coated 5 puck with a 1100 or more cant remember pressure plate. This was the heaviest duty clutch I could get without going to full race spec (which dont last), and it was easily drivable as my daily gardeners car also. Whilst on the r32 clutch topic I thought I might ask if your going to keep or bypass the loop bit in the clutch lines that makes the pedal feel softer ? If bypassing do you know if you just block the outlet and inlet for this loop with screws or what?

Edited by ryano
mm sounds like the HD is the way to go.

Anyone had any experience with Sports Organic clutches?

Cheers

If your a confident manual driver man go with a EXEDY 5 PUK BRASS BUTTON. Can take up to 300rwkw and will save you time later when you drive it hard, or push the car for some more rwkw.

That way you wont have to worry about it breaking, but might strain and blow the box first lol

Doesn't take that much getting used to, if you drive manual frequently you will pick it up in a few days.

Abu

Edited by abu

hey mate i just recently put in an exedy heavy duty cushioned button in my r33 i got 210kw at the wheels and its real good, grips heaps well and the pedal feel is a little heavier but not to much heaps better than the 5puk for every day driving still can slip a little i would reccommend it im very happy wit it.

Anyone recommending a button clutch has either driven on them for the last 4-5 years or it's their first one and they haven't had it long.

People who think button clutches are easy to drive are wrong, You can make them easy to drive but by driving it like a regular organic clutch, it will wear out in close to 12 months. To drive a button clutch is to drive it harsh, no riding...just in or out/on or off. Damages driveline and other components.

Only recommended if you are willing to replace it in 12-14 months and keep learning to drive it properly. Sometimes there is no option but to run a button clutch if power levels exceed a certain amount.

The Exedy heavy duty clutch will hold up to 240rwkw. If you don't to ghey stuff like flat shiftingand 6k launches, then you will not break it.

If you are local to Brisbane we are fitting these clutches for $715 including flywheel machine and spigot.

If you want something a little heavier then you can request the NSK-7056 kit with the NC10T pressure plate. This is the 1100kg pressure plate, and is the true antiburst/antislip cover that exedy make for Nismo. These are a fair bit more expensive but will hold more torque and last longer.

Just remember, you don't need to go overboard but you do need to consider what the car will be used for in the future because if you decide to add more power, then a different clutch may be required. Careful consideration is required to make sure you don't waste your money.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update: I got the magnet out. I bought 3 different flexible magnetic reach tools, but none of them worked. The magnet on the tip was all less than 2lbs of force, so i had to buy a special cylindrical magnet that had a pull force of 9lbs.  The magnet finally came in the mail yesterday, so i got under the car to get to work. The super strong magnet isn't that long, so i only have about 1 finger pinch lengths to hold it. I was so scared when i was going in the hole, that the 9lb magnet would just fly away inside the oil pan never to be seen again, but i had my butt cheeks clenched and finger gripped on that thing so tight, i managed to get it to suck the other magnet out.  It was a victory for me last night.         
    • Yep, pretty much what you said is a good summary. The aftermarket thing just attached to the rim, then has two lines out to valve stems, one to inner wheel, one to outer wheel. Some of the systems even start to air up as you head towards highway speed. IE, you're in the logging tracks, then as speeds increase it knows you're on tarmac and airs up so the driver doesn't even have to remember. I bet the ones that need driver intervention to air up end up seeing a lot more tyre wear from "forest pressures" in use on the highway!
    • Yes, but you need to do these type certifications for tuning parts. That is the absurd part here. Meaning tuning parts are very costly (generally speaking) as well as the technical test documentation for say a turbo swap with more power. It just makes modifying everything crazy expensive and complicated. That bracket has been lost in translation many years ago I assume, it was not there.
    • Hahaha, yeah.... not what you'd call a tamper-proof design.... but yes, with the truck setup, the lines are always connected, but typically they sit just inside the plane of the rear metal mudguards, so if you clear the guards you clear the lines as well. Not rogue 4WD tracks with tree branches and bushes everywhere, ready to hook-up an air hose. You can do it externally like a mod, but dedicated setups air-pressurize the undriven hubs, and on driven axles you can do the same thing, or pressurize the axles (lots of designs out there for this idea)... https://www.trtaustralia.com.au/traction-air-cti-system/  for example.... ..the trouble I've got here... wrt the bimmer ad... is the last bit...they don't want to show it spinning, do they.... give all the illusion that things are moving...but no...and what the hell tyre profile is that?...25??? ...far kernel, rims would be dead inside 10klms on most roads around here.... 😃
    • You're just describing how type certification works. Personally I would be shocked to discover that catalytic converter is not in the stock mounting position. Is there a bracket on the transfer case holding the catalytic converter and front pipe together? If so, it should be in stock position. 
×
×
  • Create New...