Jump to content
SAU Community

Recommended Posts

hay all just want to know how many of u would buy a vented bonnet for your stagea

they are transport approved in queensland make from firbeglass and will help they stagea get ride of a lot of heat

from under the bonnet price i will let u know soon going to the bodykit place today to give them a move on making mine

i will post a pic asap thanks guys and girls :blink:

Link to comment
https://www.sau.com.au/forums/topic/183899-stagea-bonnets-vented/
Share on other sites

hmm .. interesting! I wouldnt get one personally just because the stagea is stock as a rock at the moment and more than likely going to stay that way.. and I have never had an overheating problem yet( granted its in the middle of winter )

but back to my point.. it will be interesting to see how these bonnets match the lines of the car ( I noticed on our S2 there is an area near where the bonnet is hinged that it meets with the lines on the rest of the car - sheesh.. reading that again makes NO sense.. least I know what I mean :blink:

oh and I am pretty sure they are defectable in W.A but dont quote me on it.

hmm i would suggest to do a Carbon Fiber ones no point in doing fiberglass. Venting it doesnt matter as long as it looks good. Probably with a ari scoop for the air intake? I would be interested in a CF ONLY.

A matter of interest as well. Probably have your guy to qoute us on the pricing for Fiberglass, wet Carbon Fiber and a dry carbon on a design that we agree om. I can upload the picture for that shows the air scoop if need.

Dale - I agree on the rearward facing vent comment.. but I was thinking more the material ( carbon fibre /. fibergass ) aspect that might be defectable.

Only if the vents face rearward. (engine / coolant system failure could project fluids etc onto the screen apparently)

I don't think so, I may be wrong (I am pretty sure that happened once) but due to the A9X Torana, and even the new turbo diesel puegot has fibreglass bonnet vents so they do comply with adr's I just think that you would have to be careful not to cut any braces or anything to install them.

I think its a great idea myself and I was looking at the same thing myself, anything that removes under bonnet heat can only be a good thing IMO

hay guys went and seen the bodykit guy today he will be starting in a few weeks. carbon fibre is illegal. with these bonnets u will get

a written letter that u can show the cops and u will not get fined for it they will all have id numbers on them and transport will be notified that u have an arftermarket vented bonnet when

u buy them.

will get a pic asap thanks guys

CF bonnet is illegal? hmm i dont know. Cos theres alot of people using CF bonnet and vented too. Im only interested in CF for a seiries 1.

Unfortunately, Yudi, the fact that there are quite a few people using them doesn't make them any more legal...

I would love one, but don't (and probably won't) have the funds to dedicate to this any time soon. Need to do a few other more important things to the car for now, then I'll focus on some minor cosmetic stuff.

the carbon bonnets are "illegal" as they do not provide any crumple zone support in victoria at least so i would assume that fibreglass would be the same?

just my 2 cents

I think there is some confusion in this thread over the fact that ( from what I understand) these bonnets are going to be almost entirely CF or Fiberglass. Its not a steel bonnet with a fiberglass/CF scoop or vent.

Yea I was under the same impression as oxford1327 in regards to the crumple zone etc.

I think its best that each purchaser check with their local authorities about the legalities of it

the carbon bonnets are "illegal" as they do not provide any crumple zone support in victoria at least so i would assume that fibreglass would be the same?

just my 2 cents

CF bonnet is illegal? hmm i dont know. Cos theres alot of people using CF bonnet and vented too. Im only interested in CF for a seiries 1.

If you smack a pedestrian with one you'll litter their body with Carbon shards and they don't show up on X-Rays.

Or so i'm told.

Edited by Xmetal

hi all

these bonnets are transport approved in queensland they are all made of fiberglass and i will speak to they today about how it works in other states will post a pic today

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few more recent pics
    • full send the cnut, do this   fark the wrapping and/or stick on siet. These guys are the ones to go to: https://www.realthermo.com.au/  
    • Just had a look, they don't. Fuelling on the base map is purely alpha-N, and the ignition table is MAP. Remember it's just a base map to get the car moving  
    • Hi everyone, I’m Dave from Canberra. Here's a few pics of my 1992 R32 GTST coupe which I imported back in 2006. Only mods so far are HKS Hi-power cat back exhaust, K&N filter, ATC Volanti steering wheel, Pioneer stereo, amp and sub. This was my daily driver up until 2015 and sadly hasn’t been driven at all in the last 5 years due to marriage, work, and kids taking up most of my time and spare cash.As such its in need of a bit of TLC and one of my goals for this year is to get it back to running condition and maybe look into club/historic rego. I’ve joined SAU so I can ask a few questions along the way (although I promise to google Current Problem +SAU beforehand!)
    • From talking to the mx5 guys the NC doesn't actually need bonnet vents like the earlier NA and NB models, due to a better designed cooling system and undertray design There's plenty of them used as street cars and weekend track toys running anywhere from around 170 to 250kw with stock non vented bonnets, I initially was going to get some bonnet vents, but, as they are not actually required, I'll put vents on hold for a while and just monitor temps, though I do need to get something to actually monitor engine oil temps though, coolant temp can be pulled from the OBD2, but the oil gauge in the car is not actual oil temp, it is only a calculation based off coolant temp and RPM ☹️ They do recommend upgrading the radiator, which I have already done with a triple pass, and the only other thing they recommend for a street car is heat management, like I talked about above to protect bits in the engine bay from radiant heat, and to either replace the nearly 20 year old plastic coolant expansion tank, which I have done, or get a aftermarket alloy jobbie for some bling They did also say that if I wanted to track the car on occasion a oil cooler and sump baffle would be required, and as I already have had a sump baffle installed when the engine was out......... I'm going to get a oil cooler with a thermostat....... just in case I do eventually track the car, but probably not, but still maybe...🤪
×
×
  • Create New...