Jump to content
SAU Community

Recommended Posts

For a decent job your looking around 4 grand for the spray job unles syou have a contact who can do it cheaper for ya, and ya kit fitted will cost about 1700. Obviously if ya do it at the same time you save on fitting and painting costs but sitll not cheap no matter which way ya go.

Originally posted by drunkentiger

;)  no the number plate isnt URMINE.... :P

Depends on the extent of the spray.

If it's different colour + you want an engine bay spray and even boot etc. etc.

Can be upwards of $6,000-7,000...

Same colour and just say most of the car is ok AND it's a flat colour (non-metallic) you can be looking at as low as $2,000.

I've been told that if the large surfaces (ie. bonnet, roof) are ok - could be a fair bit less.

Guys who say $1,500 is perhaps getting on the dodgee side.

Unfortunately mine is spark silver and it's gonna cost an arm and a leg.

T.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’d love to find some where that can recover the dashes to look brand new and original. Mine has a very slight bubble, nothing compared to some I’ve seen though 
    • $170K. I asked one of the guys there as a joke if that price was just for the passenger seat as it was where the price sheet was... he tried really hard to crack a smile 😄 He also mentioned that every single part of the car was inspected and either restored or replaced with a new or as new part, or made from scratch. The interior was incredible, every inch like a new car.
    • Time for a modernisation, throw out the AFM, stock O2s, ECU into the e-waste bin. Rip out the cable throttle, IACV, pedal, etc. into the scrap metal bin. DBW, e-throttle, modern ECU, CANbus wideband, and the thing will drive better than when it left the factory.
    • I agree, don't go trusting those trims. As I said, first step is to put the logger away, and do the basics in diagnosis.   I spend plenty of time with data loggers. I also spend plenty of time teaching "technicians" why they need to stop using their data loggers, and learn real diagnostics.   The amount of data logs I play with would probably blow most people away. I don't just use it to diagnose. I log raw CAN data too, as a nice chunk of my job is reverse engineering what automotive manufacturers are doing.
    • I'm aware, but unless you're actually seeing the voltage the ECU is seeing and you're able to verify the sensors are actually working I find it hard to just trust STFT/LTFT. I will say, logging the ECU comes naturally to me because it's one of the lowest effort methods of diagnosis and I do similar things in my day job all the time. Staring at 20+ charts looking for something that isn't quite right isn't for everyone. NDS1 allows you to log almost everything so that's normally what I do and then sort out the data later. 
×
×
  • Create New...