Jump to content
SAU Community

Recommended Posts

hey i have got a problem wiht my indicators.

all globes work, but they are crazy fast, however when i put my hazards on they are normal. any one got some suggestions???

cheers

A common problem with the 33's is a shorting that occurs at the base of the indicator stalk due to wear. I am assuming you can hear the flasher unit clicking but probably don't actually have the indicators flashing? There are some sliding contacts at the base of the indicator stalk that wear and eventually the small amount of plastic separating the contact strips melts and a small shortcircuit results. Eventually you will see smoke from the buring plastic emitted from the base of the indicator stalk.

Do a search because I directed someone else to this problem in 2005 and he took pictures of the repair process. I personally can't recall how I solved the problem and can only recall cleaning the contacts ( I did a quick fix on the side of the road).

Hope this helps.

Cheers

Most flashers are load based (expensive ones that aren't are rarely used OEM), basically you don't have enought load, maybe a globe has gone (is it both sides? Left & Right?), sometimes after ppl install LED globes without resistor packs or equiv. other wise check wiring.

But given you hazards are fine(uses same flasher unit as individual left and right), it seems the problem lies with the indicator stalk.

try re conecting the wires into the back of it.... i had that problem ... i just re did all the wries to the front indicators and it worked fine... ( i too had the same problem of the hazards being normal)... maybe give that a try... bastards of things

  • 2 weeks later...

I haven't had this problem with my skyline but I did with my old car. The problem was a bad earth, fixed that and it was all good. I'd just do the simple things first like check all connections etc. after that you may need to check the flasher etc. Swap with a mates one if you can to test it.

Good luck

yeh, ive got the same problem all the globes work at normal speed with hazard lights but only when i indicate right it goes double the speed, its fkn annoying i find myself avoiding turning right all the time due to embarasment.

I have the same problem. they flech really fast left and right, but hazard lights work at normal speed. i checked the fron indicators and only two of the three wires are connected to the after market indicator on my body kit... i'm assuming that the wires that are not connected to the indicators are shortening the circit? what do i do with the left over wires? any opinion?

cheers in advance~!!

I have the same problem. they flech really fast left and right, but hazard lights work at normal speed. i checked the fron indicators and only two of the three wires are connected to the after market indicator on my body kit... i'm assuming that the wires that are not connected to the indicators are shortening the circit? what do i do with the left over wires? any opinion?

cheers in advance~!!

I'd check out what is going on with the wires with preferably a multimeter or a test light. Find out whether the wires are supplying power or meant to earth the circuit. I'm not fantastic with electrical problem solving so I'm sure someone will correct me at some point.

If there is a plug to your indicator disconnect it and see what each one does when the indicator is switched on. The disconnected wire could possibly be a missing earth wire? Is it possible to connect the 3 wires to the indicators?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Surely the merged entity will be called "Honda" given the relative company values. I've got to be honest, I don't understand how merging 2 companies that missed EVs (despite Nissan making the first mass produced one) will solve their problems
    • If you haven't bought the ECU yet, I would strongly consider buying a modern ECU. Yes it is very easy to setup and tune, however it is lacking many of the features of a modern ECU. The pro plug in is something like 10 or 12 years old now? Can't remember exactly but it is very dated now. In that time the Elite was released and now we have the Nexus platform.  I would strongly consider not buying the ECU that is 3 generations old now (especially as it isn't a cheap ECU!). 
    • Im happy for it as long as it means reanult gets the boot 
    • Sorry I should have been more clear with the previous post.  The block is a sanding block - picture something like this https://motorguard.com/product/motor-guard-bgr161-bgr16-1-rigid-psa-sanding-block-2-5-8-x-16/ The guide coat is the paint It's two separate things I was talking about, there is no "block guide coat". 
    • Maybe more accurately, you aren't just dulling the existing paint, you are giving the new paint something to 'grab on to'. By sanding the existing paint, you're creating a bunch of pores for the new paint to hook on to.  You can lay new paint over existing paint without sanding it, might last a year or two then sad times. The paint will peal/flake off in huge chunks. By sanding it, the new paint is able to hang onto it and won't flake off.  Depends on the primer you are using. When you buy your paint, as the paint supplier what grit of sand paper to use before you lay down the primer.  Use whatever you like as a guide coat. Pick a colour that really stands out in contrast to the paint. So say your sanding/painting a currently white car, using a black guide coat would work well. You very lightly lay the black guide coat down, then as you sand the car with the large block, all the high spots and low spots will stand out as the black paint is sanded off (or isn't sanded off).  When you buy your paint, hit up your supplier for recommendations for what paint to use for a guide coat if you're unsure what would work well with your setup. 
×
×
  • Create New...