Jump to content
SAU Community

Recommended Posts

i would be changing it simply due to age of the pump, but also i think the stock one would be at it's limits.

new fuel pumps are cheap and take about 1/2 hour to install yourself

Edited by Green_s13

Ok cool, sounds like I should get a new one! lol

Might get one installed today while its in the workshop.....

My mate said he can get me "JR coilpacks", has anyone heard of them before? Ive tryed doing some research on google but cant find anything. Or would it be best just to get Splitfires?

Best to change it man.

WALBRO fuel pump is like $130ish, very good pump. I think there is someone with an R33 making about 300rwkw with one?

GTR pump is also a good upgrade. Its a similar price to a WALBRO pump, but 2nd hand obviously. There a good size pump and will serve you fine.

BOSCH 040 pump is a slightly larger pump, but worth more like $180. Also a good brand pump good for big power.

Personally running a GTR pump and aiming for about 220-240rwkw which I think it should be fine with.. But I only bought it because I got it cheap.

Would go with a WALBRO if I did upgrade as they are good value for money, just make sure you get an original one.

Just my input, hope it helps. :nyaanyaa:

Edited by abu

Oh and just a quick input about injectors. They will be fine to about 215-220rwkw, once you exeed that or get near that its recommended that you change them as they get high into the duty cycle, which means there more prone to failure.

R32 GTR injectors are a good replacement, but for a few hundred more you can grab a new set of NISMO 740cc injectors, about $500-$600.

just think about how vital it is to keep a nice flow of fuel in your car.. change it asap.

i personally wouldn't change your 15 year old standard pump with a 15 year old GTR pump.

if you're really after GTR type, get the nismo pump. if you want your money's worth, get a bosch 040.

change the injectors too. i wouldn't feel safe keeping them close to full load.

that's my 2c :nyaanyaa:

Ok cool, sounds like I should get a new one! lol

Might get one installed today while its in the workshop.....

My mate said he can get me "JR coilpacks", has anyone heard of them before? Ive tryed doing some research on google but cant find anything. Or would it be best just to get Splitfires?

If you dont have ignition problems, then you dont need any.

Fuel pump:

http://www.skylinesaustralia.com/forums/in...=91993&st=0

When you say ignition problems do you mean when i start the car? Becasue everytime i start the car i need to touch the pedal a bit to get the fuel going through? Would this be the fuel pump or my injectors?

With the Coilpacks, i wanna get some new ones as every now and then the car will start miss firing, but then it will be ok for awhile..... Think im gonna go for the JR coilpacks, they are new for $400. Spilfires seem to be $700... bit expensive.... Has anyone heard of the JR coilpacks?

Edited by r32matt
Oh and just a quick input about injectors. They will be fine to about 215-220rwkw, once you exeed that or get near that its recommended that you change them as they get high into the duty cycle, which means there more prone to failure.

R32 GTR injectors are a good replacement, but for a few hundred more you can grab a new set of NISMO 740cc injectors, about $500-$600.

It'll be okay to run your standard injectors at 215rwkw+ aslong as you've got a good tuner. I think it'll be best to change your injectors at 200rwkw though.

Like everyone else has said about the fuel pump, just get a new one. Don't replace a 15 year old pump with another 15 year old pump.

With the Coilpacks, i wanna get some new ones as every now and then the car will start miss firing, but then it will be ok for awhile.....

don't start pulling the cash out yet.. try a couple things.

for starters, have you taken off your spark plug cover? with it on it traps the heat inside which can make your coilpacks go funny.

second, try doing a coilpack diagnostic check to see if they're up to scratch.

and third, slap some injector cleaner in. see if that helps.

:P

Best bet would be to change them out before they do go, as the density of compressed air/fuel in the combustion chamber increases, so does resistance, putting more load on the coil packs which will eventually cause them to fail :P

Splitfires are proven to work but they're also a rip off.. If you're handy with electronics it doesn't take long to wire up 3 bommodore coil packs in a wasted spark type setup :(

If you dont have ignition problems, then you dont need any.

Fuel pump:

http://www.skylinesaustralia.com/forums/in...=91993&st=0

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I have done a lot of research before posting here and on gtruk forum. couldn't find anything. I have my gauges all part except the needle itself. the needle has a extremely small hole in the center, but the shaft going to the needle is extremely small and appears to have nothing to index it either. doesn't seem strong enough to simple pry or pull without damaging something. Already tried the old spoon trick on a extra triple meter I have from a gtt, but no luck. the center cap comes off easily but the hole in the meter face plate aren't big enough to get over the needle itself. figured this would be my best place to find someone who might have actually removed theirs. wonder if there is some type of small pin press tool to push the pin in while pulling the needle base off.
    • Ok...its taking me long enough to finally do this.  Feck financial security...heart disease will get me soon enough anyway So welcome to the garage..."Clem" Belsil80 has been running a 370Z in Super TT series. So after entering with him in last years Winton 300 i figured I  need my own car. Seems SAU Vic race cars need to be yellow....{tick} Reckon with enough motor i will be able to make up for the lack of talent and stay ahead of the 370Z... but the LS powered S13 and E36s are a ways up the road Aim is to have a car that doesnt stop or turn but has a bit of shed built motor with jam...maybe some cream  First step is getting this ex drift car log booked I am keeping faithful silver car. As the road-club car gets upgrades the race car wil get the sloppy seconds
    • Assuming that they will come off without damage at all.... i would have thought just pull straight up off the spindle with a something or other than can reach underneath. Have you searched for youtube vids of people doing similar on R34s or any other Nissan from the same vintage? They should be the same technique, in all likelihhood.
    • Keeping in mind that sandblasting is really aggressive on softer metals like cast alloy, and you can do damage that you might regret. For trash wheels, not a problem. For wheels with value/scarcity issues, etc.... perhaps a less aggressive media is a better choice?
    • Don't get all high and mighty. Experienced spanner wielders know exactly what effort is required to release an Oof.
×
×
  • Create New...