Jump to content
SAU Community

Coolant Hoses For Rb20 - Adelaide

cam32
 Share

Recommended Posts

cam32 Explorer

cam32

Posted
Posted (edited)

hey all

i imported some rb30 (r32) coolant hoses from japan for my car but no longer need them. They r still in their pagaging so yeah. I would have returned them but u can't do that with stuff from japan. Anyway i have the part numbers which i will put up, i have 5 hoses. Ones under the inlet.

part no. 14056-72L02 - This is the hose that is on the gear box side of the inlet, basically a right angle hose with a little kink on one of the ends

part no. 14056-80S00 - This is a thin little hose with a few kinks in it, this is also just under the inlet but more towards the middle.

part no. 14056-72L21 - This hose is also pretty small but but on the front of the vehicle side comparing it to the last hose. this has like 4 right angles in it. all over the place.

part no. 14056-80S11 - This hose is further towards the ground and goes into a fitting more next to the block then goes along towards the back of the car. Right angle in it.

part no.14056-72L20 This again another small hose under the inlet, its got sort of a hook on the end of a straight bit of hose.

any questions ask away or pm me.

cheers cameron

Edited by cam32
Link to comment
https://www.sau.com.au/forums/topic/184092-coolant-hoses-for-rb20-adelaide/
Share on other sites
cam32 Explorer

cam32

Posted
  • Author
Posted

come on someone must want some hoses. The prices will range on each hose. i know exactly how much they cost coz i have the invoice for them.

  • 1 month later...
Thelen Rising Star

Thelen

Posted
Posted

Im looking for coolant hoses and the like. My R33 needs basically a full new cooling hose kit. Do you have anything I can use?

(I don't want to pay $700+ through Nissan if I can avoid it)

Cheers,

Josh

Oh, im in Greensborough, Melbourne, so delivery/whatever shouldn't be a problem.

  • 8 months later...
cam32 Explorer

cam32

Posted
  • Author
Posted

i also have the small little hose at the back of the motor, its only like 10 cm long. like i said i can put the diagram up if need be and if people are interested i will work out some prices coz they weren't cheap

  • 2 weeks later...
cam32 Explorer

cam32

Posted
  • Author
Posted

th_P6110423.jpg

th_P6110425.jpg

th_P6110427.jpg

th_P6110429.jpg

th_P6110431.jpg

th_P6110433.jpg

these r the pics of the hoses. a bit hard to see and they r all random but this is them. i will try and get the diagram up for the hoses soon

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      New fix for low tyre pressure from bmw

      By TurboTapin · Posted

      CTIS (Central Tire Inflation System) has existed since the 80's. I'm looking into buying a Hummer H1 and they generally included it. 
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Dose Pipe Sutututu
      Another little story of weird shit happening

      By Dose Pipe Sutututu · Posted

      Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
    • MBS206
      R34 gtt rb25det neo timing belt kit

      By MBS206 · Posted

      It's most likely the bolt/bush where the cover bolts back wore and allowed cover to move forward.
    • GTSBoy
      Another little story of weird shit happening

      By GTSBoy · Posted

      Still haven't put the injectors and R35 AFM in so we can tune the bloody thing for the HG highflow it got mid last year! I think I can forecast the upgrade path to a bigger twin scroll, external gate, Haltech, flex setup, Samsonas, dis dat, etc will be .... a while away!
×
×
  • Create New...