Jump to content
SAU Community

Coolant Hoses For Rb20 - Adelaide

cam32
 Share

Recommended Posts

cam32 Explorer

cam32

Posted
Posted (edited)

hey all

i imported some rb30 (r32) coolant hoses from japan for my car but no longer need them. They r still in their pagaging so yeah. I would have returned them but u can't do that with stuff from japan. Anyway i have the part numbers which i will put up, i have 5 hoses. Ones under the inlet.

part no. 14056-72L02 - This is the hose that is on the gear box side of the inlet, basically a right angle hose with a little kink on one of the ends

part no. 14056-80S00 - This is a thin little hose with a few kinks in it, this is also just under the inlet but more towards the middle.

part no. 14056-72L21 - This hose is also pretty small but but on the front of the vehicle side comparing it to the last hose. this has like 4 right angles in it. all over the place.

part no. 14056-80S11 - This hose is further towards the ground and goes into a fitting more next to the block then goes along towards the back of the car. Right angle in it.

part no.14056-72L20 This again another small hose under the inlet, its got sort of a hook on the end of a straight bit of hose.

any questions ask away or pm me.

cheers cameron

Edited by cam32
Link to comment
Share on other sites
  • 1 month later...
Thelen Rising Star

Thelen

Posted
Posted

Im looking for coolant hoses and the like. My R33 needs basically a full new cooling hose kit. Do you have anything I can use?

(I don't want to pay $700+ through Nissan if I can avoid it)

Cheers,

Josh

Oh, im in Greensborough, Melbourne, so delivery/whatever shouldn't be a problem.

Link to comment
Share on other sites
  • 8 months later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RB25inside
      Compatible rear drive shafts R34 N/A?

      By RB25inside · Posted

      Are these the Dmax ones you are in reference too? https://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35#description Not a bad idea to get the uni flange ones. I have sent just jap an email too. Will see what they say lmao. Only thing is the Dmax ones are on a big back order. Low key anything will be better then my OEM ones I got as they are sounding like popcorn when I go under load lmao 😂☠️🪦.
    • GTSBoy
      Compatible rear drive shafts R34 N/A?

      By GTSBoy · Posted

      They should do. I have S14 (or something S chassis, anyway) driveshafts in my R32 (because my diff flanges have 3x2). They're the right length. When you go looking for R32/3/4 driveshafts (for turbos), they're all the same thing, so are the same length. So there really shouldn't be any reason why those cheapies from JJ won't also fit an R34. R32/3 NA should also be the same thing. The (3x the price) D-Max ones are uni-fit. They have 5x1 and 3x2 bolt holes and say they cover all the cars. So that would also suggest that they are all the same except for the flanges. And in that case, the flange goes both ways. I'd be buying the D-Max ones if I ever have to replace a shaft. Because that will open up diff options without needing to juggle shafts also. Juggling shafts is gay.
    • ChoppedSpots
      GReddy Injector Help!

      By ChoppedSpots · Posted

      Yeah with the adaptors they do look like the photo above - just the fitment within the plenum itself and then further with the rail to the intake is questionable - we shall see tomorrow hopefully once I get some replies from Aeroflow, maybe those bosses are the missing piece....
    • Dose Pipe Sutututu
      GReddy Injector Help!

      By Dose Pipe Sutututu · Posted

      Should be fine, if you have it sitting too far in, you end up just spraying the walls and have shit idle. You "can" run them like that, however I don't think it's a great idea (also depends on your plenum, might be good to just get the injector bosses first, mock it up and see if you need to get the bottom extension) Ideally your injectors, with the extension should look like this  (Not my photos, just Google)
    • ChoppedSpots
      GReddy Injector Help!

      By ChoppedSpots · Posted

      Thanks for the replies guys, it's really appreciated.  It seems the kit was supposed to come with those injector bosses but hasn't. Unsure if they'll help as even with the adaptors to make them a 3/4 height injector they still sit too far out so mount the fuel rail?
×
×
  • Create New...