Jump to content
SAU Community

My Auto Tranny & Dash Went Crazy Tonight!

jaik

By jaik,
in V Series (V35, V36, V37 & Infiniti)

 Share

Recommended Posts

jaik Mentor

jaik

Posted
Posted

Folks,

I was driving along tonight and all of a sudden i noticed my Tacho bouncing up and down, then my VCS and Slip lights came on, then my speedo stopped working and when i put my indicator on it would cut in an out - ie not tick properly. Then the car gave a big thud from the tranny as it shifted gear - so i think its highly likely the Auto ECU wasnt changing the tranny properly as it couldnt get a correct RPM reading. I put my foot down and it didnt down shift. When i pulled up to lights it abruptly changed into 1st. I turned the car off and back on again and all was normal. Later on in the evening the dash started doing the same thing, and the tranny started not shifting properly (with the dash going funky etc). I then put the Auto into the Manual mode but the dash Drive Gear symbol didnt update, and the number of the gear didnt display. I could push - or + and nothing would happen, I then put the car in Reverse and the display still read D, but the car reversed OK - I then moved it back down to D and the Auto Check light quickly blinked on and off. All the time VCS OFF and SLIP were illuminated.

It has been raining here but other than that I cannot think of any other reason for this to happen.

Could it be the Dash itself on the blink? I assume like some Nissans the speedo and RPM go via the dash before going to the ECUs? If thats the case it would explain the tranny going haywire, but I dunno about the VCS off and SLIP. I tried pressing VCS but the light stayed on.

Any insight would be great!

JK

GT-R LM Proficient

GT-R LM

Posted
Posted

ive noticed in the wet in the last few days when the vdc is on and the wheels spin a bit and the slip light comes on and it stops spining but the slip light then stays on and the vdc off light stays on aswell even when you try to turn it on. when you then turnoff the car they turn off and its ok, until the vdc kicks in again.

I belive mine are just error codes that a scanner will pick up and fix, due to all the electrical work carried out on it recently.

They that thud you are talking about i never had but i would get that checked out imidiatly.

cookie--monster Community Regular

cookie--monster

Posted
Posted

read the owners manual.The infiniti one says any probs with the vdc or gearbox and it will go into 'safe mode'

untill it is restarted,to protect the transmission.

i agree that u should get it checked asap-and get the oil changed as well.

hopefully they have the correct diagnostic program to check the electrics etc at your local nissan dealer???

jaik Mentor

jaik

Posted
  • Author
Posted

Ive found what could have possibly been the issue, I have no battery cover so there was half an ocean sitting around the main wiring loom where it runs under the battery. The past few days have been fine so no rain, and the tranny is performing normally. I am going to have to price up a battery cover me thinks!

The thud was probably from the jerkyness of the gearshifting. But having the whole dash go haywire says something was going funky everywhere!

JK

WazR32GTSt Grand Master

WazR32GTSt

Posted
Posted

i have seen a similar issue with my auntie's hyundai sonata. out of nowhere the dash started to go aywire, dropping gauges down to zero then flipping up to max etc.

turned out to be the negative terminal of the battery wasn't making good contact..

the water might have been screwing up the battery somehow.. get a cover over the battery! what happened to the stock cover?

jaik Mentor

jaik

Posted
  • Author
Posted

Raining again tonight and after an hours drive in the rain my girlfriend steps out of the car with one wet shoe. Interesting... i had a bit of a look up the footwell and low and behold I see water dripping down the wiring looms! I dare not look behind the ECU cover just incase im in for a shock. Sh!t.

Is there anywhere for the water to come into the cabin?. I mean der, of course there must be somewhere but im not sure where. Possibly thru that air vent behind the battery (i think thats what it looks like). Would it come through there if I had no battery cover? Better yet, i wonder how water is getting down there...

Thanks!

JK

IT Doctor Enthusiast

IT Doctor

Posted
Posted
Raining again tonight and after an hours drive in the rain my girlfriend steps out of the car with one wet shoe. Interesting... i had a bit of a look up the footwell and low and behold I see water dripping down the wiring looms! I dare not look behind the ECU cover just incase im in for a shock. Sh!t.

Is there anywhere for the water to come into the cabin?. I mean der, of course there must be somewhere but im not sure where. Possibly thru that air vent behind the battery (i think thats what it looks like). Would it come through there if I had no battery cover? Better yet, i wonder how water is getting down there...

Thanks!

JK

Jaik

Did you get a warranty from C-Red when you bought it? Might pay to go back and ask them for the battery cover and to see if while they were doing all the mods wether or not they might have taken a cover off around the ecu unit etc and forgot to put it back, might be a simple thing and save you alot of stuffing around.

P.S. I hear the guy in the meat van loved your sound as well :) .

Paul

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      R32 update from 1990's spec.

      By joshuaho96 · Posted

      Wideband is worth setting up if only for tuning purposes. I would not mess with the ignition system unless there's a misfire. HKS crank trigger is popular out here for the relatively easily sourced Denso crank sensor, not a bad idea to install as well regardless of power level on a standalone. Boost leak test is worth thinking about. Oil pressure sensor tied to a fuel cut isn't a bad idea either. Getting the tune figured out is a good idea. Without putting eyes on it and getting under it there's no way for us to tell you exactly what it needs but most likely you're down to the last 10% that will make a big, big difference in how happy you are with the car.
    • PotatoCake
      Has anyone put in brand new full carpet? (not floor mats)

      By PotatoCake · Posted

      Doing a refresh of my 33 and can see a few websites stating they sell the entire main carpet for our cars, but they all have generic photos which is fine, i understand they are custom made to order.  Just seeing if anyone has got it done or had any experience with this, as i would only want to do it if the fit and finish was as good as oem https://carmatsdirect.com.au/products/moulded-carpet-or-vinyl-for-nissan-skyline-r33-1993-1998-coupe https://knoxautocarpets.com.au/moulded-carpets/nissan/skyline/skyline-r-33-1993-1998/
    • MBS206
      R32 update from 1990's spec.

      By MBS206 · Posted

      Any plans for E85? If so, add flex fuel sensor.   I'd probably add in the sensors I mentioned above if the Link will support using them for engine protection. With water pressure, you need to be able to effectively set it that "If temp > X, and pressure = atmospheric, shutdown" as at running temp, you should be able to read pressure in the cooling system. If pressure suddenly disappears, it means the water went some where, and this is a quicker reaction than waiting on water temp to go up (Which, can take a little longer than you'd like, considering it now has to wait for hot air to heat it up) Oil pressure, Oil temp, both would be on my list too if you're looking to add sensors. Wideband O2. And at least one EGT sensor. If you're feeling deluxe, put in individual runner EGTs. Single EGT sensor is more so forget about a specific number, get used to "What is normal EGTs", and then keep an eye on it, if it starts going away from "normal" it's a sign something is wrong (Also, things like the tune can still start going out of spec, but EGTs may not show it, for example one injector starts running leaning, so ECU richens everything up, now 5 out of 6 cylinders are rich, and running cool, with one cylinder lean and running hotter, so it's not perfect) Then there is your other things to look at non sensor related, but you may have already done, or have underway, and that would be things like building a sump for more oil, and better oil control under high G-Forces (Cornering, brakes, acceleration). Basically, the above is worth looking/thinking about, if the ECU can do protective stuff with it, and you continue to use it how you are (Drive it to the track, thrash it, drive home, repeat once every 3 to 4 months)
    • Ty1
      Hicas ball joint install tool

      By Ty1 · Posted

      Can also confirm these work a treat for most balljoints and bushes. If you have access to a big rattle gun, they make the job so much easier and quicker, compared to using a socket wrench or shifter on the c-clamp 👍
    • djr81
      R32 update from 1990's spec.

      By djr81 · Posted

      Its sort of street but got used for circuit sprints on account of I never drive it on the road because I dont have the time to spare. So it usage was sits around for months at a time then gets driven either 50 or 250 kms to the track followed by 20 laps followed by 50 or 250kms home followed by stuck in the shed until next time. So yeah neither fish nor fowl. Just dont want to break it on the track as a preference. Hence the fairly short sensor/mod list. Probably more worried about it pinging itself to destruction more so than anything oil related.
×
×
  • Create New...