Jump to content
SAU Community

Recommended Posts

Hi all,

I'm kind of a noob here. My name's Eugene, I bought an R32 GTST a few months ago.

paid $8500 for it. it had some body kit damage and is pretty much stock.

But yeah i love the car and skylines in general. the thing kicks out lovely :whistling:

Just wondering if anyone had any advice what i should mod on it first and also who's good to go to in canberra for imports.

some people tell me to change the stock turbo straight away cause they're shit

but i dunno, I figured it would be better to do the intercooler and exhaust first.

props for any help.

Link to comment
https://www.sau.com.au/forums/topic/184130-quick-hello/
Share on other sites

Theres definately a few things to do before replacing the turbo. Although most people would know more about that than me. I'd go for a bigger intercooler and exhaust first. Upping the boost with a electronic boost controller, or a manual one.

BTW welcome.

Link to comment
https://www.sau.com.au/forums/topic/184130-quick-hello/#findComment-3334764
Share on other sites

i would also recommend some sort of aftermarket engine management before changing the turbo

otherwise you are pretty much limited to exhaust, pod or good quality panel filter, intercooler and a tad more boost.

depends on what side of town you are on as to where to take the car.

ive dealt with trojan in mitchell, autotech in fyshwick and gas tune in tuggeranong and they all seem to do good work

Link to comment
https://www.sau.com.au/forums/topic/184130-quick-hello/#findComment-3334944
Share on other sites

once you have done the exhaust (go for a full system not just a cat back if anything they just make a lot of noise), the intercooler and gotten a boost controler talk to CEF11E. He should be able to retune your stock ECU for a reasonable price.

Link to comment
https://www.sau.com.au/forums/topic/184130-quick-hello/#findComment-3335480
Share on other sites

Theres definately a few things to do before replacing the turbo. Although most people would know more about that than me. I'd go for a bigger intercooler and exhaust first. Upping the boost with a electronic boost controller, or a manual one.

BTW welcome.

Having said that, the common turbo upgrade is the R33 turbo. I happen to have on I will sell cheap to get rid of it ;) Shameless I know

Link to comment
https://www.sau.com.au/forums/topic/184130-quick-hello/#findComment-3336908
Share on other sites

Firstly, welcome to the forums! I hope you have much fun and friendship on here!

1st thing I like to see done is brakes and supension work( including quality rubber). Power is no good if you can't keep it on the ground. Then the 'little things' that need neatening up like loose bodywork, blown bulbs, loose wiring etc; all the things Plod may look for a reason to make life difficult. THEN the fun starts. There's much info' and opinion on here:take it all on board, stir once, digest, and plan your course of attack. Have a firm end result you want to acheive (use, power, economy, 'feel' sound, look, degree of legality etc) and try to stick to it!

Enjoy!!

Link to comment
https://www.sau.com.au/forums/topic/184130-quick-hello/#findComment-3337278
Share on other sites

Get rid of the RB20 and transplant an RB25 inplace along with the R33 gearbox... Thats where the fun is :D

But if you dont want to do that (or dont know how) then go for some good tyres first, like Jayce said its not good having power if you cant get it to the ground, then put some decent brake pads in it and fluid aswell... And if the suspension isnt to good replace it too, there are some great kits that you can get through these forums, just have a look in the group buy and for sale sections.

As for rubber, either Frink or I can help you out there... GO Federal Tyres! :wave:

To get some more go, do the intercooler, pod filter and exhaust and have the ecu re-flashed and you'll be happy as a pig in sh!t... Check out Just Jap for intercooler and exhaust kits, they're good quality and inexpensive bolt on kits that you can install yourself.

Oh and Welcome to the club :wave:

Edited by Bullet32
Link to comment
https://www.sau.com.au/forums/topic/184130-quick-hello/#findComment-3337955
Share on other sites

Hey mate, welcome to SAU.

This place is pretty wicked. I'm a nube to the whole car scene, let alone the modification side of things! You'll find HEAPS of info and everything you need to know about your car and its mods inthe forums.

I'm currently in the process of digging up some info so I can get a bigger turbo. I'm so lost.. BUT, it's all in here somewhere!

Link to comment
https://www.sau.com.au/forums/topic/184130-quick-hello/#findComment-3338377
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've watched some vids and the technique seems to be to butt the sheets up to one another and use MIG to spot weld and slowly fill in the spots until its eventually all sealed. No runs as you would normally do, as there's too much heat generated that way. Yeah my stick welds are terrible these days because its been so long since i've done any of it. I expect to be spending many hours practicing
    • I have personally seen a Tomei USA RB26 cam that didn't even fit the head. Kind of nuts to me that it was even possible for that to happen but such is life.  There's two UP Garages in the US. One is a US branch of the Japanese company which sells things they brought over at tremendous markup. The other is University Place Garage/Fairlady Motors which is a shop best known for putting VCAM in RBs and trying to convince people to stop putting in 800hp of turbo on a 2.5L motor.
    • Gasless MIG is not exactly suited to what I would call "delicate" or "attractive" welding. So I would rule it out for sheet metal rust repair type stuff, unless you're only doing it in hidden places. I'm thinking about getting myself a gasless MIG for "hack together" type work. Noting that my welding experience is very very low, and quite a long time ago. So I'm also looking for "simple", but I'm not expecting "excellent". I'm not even sure that proper MIG is the best for sheet metal work. I get the feeling that the degree of control and the minimisation of heat input that you get from TIG is probably what you really want. And then you have to get good at doing it before the welds won't look like a monkey flinging a handful of shit anyway. You're probably SOL for an easy and cheap way to get from where you are to where you want to be. Much like myself.
    • Any recommendations for what would be the easiest welding type to start on, for sheet metal rust repairs and maybe some exhaust piping too? Seems like MIG is the most common. Would gasless MIG be ok to learn on and do some simple jobs? I have a stick welder which has a Lift TIG setting, but i'm more interested in getting whatever's easiest to do, and most suitable, rather than using what i have.
    • Is the UP Garage in the US of Ayyeee even the real UP Garage?
×
×
  • Create New...