Jump to content
SAU Community

Recommended Posts

Originally posted by Soulja

Are we talking about WRX or "STi WRX"?

I have heard alot about WRX having shithouse gear boxs.

I know STi Runs around low 13 stock (as my mate has a mid mod one running mid 12s)

The best of the STi's runs a high 13.

Change the turbo,ecu and intercooler and they can run mid 12's (after about only $6k of extra mods).

Link to comment
https://www.sau.com.au/forums/topic/18416-wrx-vs-r33/page/2/#findComment-398896
Share on other sites

Let me get this right u can import s15 200SX for around 25k???

After compliancing, landed this is what i was quoted yeah , but you won't be able to do it towards the end of the year. Best to ask an importer directly, not me, but that is just what i was told. go to http://auctions.yahoo.co.jp for a rough estimate of how much the 2nd hand vehicles are going for over there.. allow your $10-12k import/compliance costs and there you go...

If you can get an R34 GT-T for $33k or so now (if you are lucky).. it seems about reasonable you can get an S15 for $25k or so. Remember in Japan, the Silvias were pretty much the cheaper "model down" from the skylines.

Link to comment
https://www.sau.com.au/forums/topic/18416-wrx-vs-r33/page/2/#findComment-398923
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • At this point I'm just 'hoping' it's the turbo seals. I did speak to someone who said it's normal for these turbos to have a bit of axial play? Not gonna lie I've never checked a turbo for axial play before but you could hear it tapping a bit as I moved it back and forth. Surely that's too much? My theory is (could be completely wrong), bad axial play, worn bearings, bad seals, oil into dump/compressor side, burns in exhaust = blue smoke. On a timing belt related note, my crank pulley was missing that front plate that sits in front of the timing belt. It's that metal round plate. It did have the rear one, and the woodruff keys are in the crank which was nice. Can anyone confirm if the NEO det engine has a front plate, im sure it would to protect the front of the timing belt or something. Water pumps...the pump I got was an NPW (yes grill me if I should've got a genuine one lol). It has a smooth mating surface, kit came with a pretty pathetic looking paper gasket. Do I need to use any RTV or just trust the gasket will work because its a smooth mating surface? Cheers legends have a good Easter break!
    • Cheers man, I thought the same.   Bit of an update on it all. It was definitely blue smoke, not grey after all. It didn't really smell oily but it was blue after all. Also puffing just the smallest amount on idle with no throttle.   I ended up pulling the intake and exhaust off and there was around 3mm of axial play on the turbo shaft. So I figured we'll that's buggered and sent it off to get hi-flowed at hypergear. Haven't got it back yet.   I haven't compression tested it yet. Had a look in the cylinder and cylinder 1 spark plug, looked a bit sooty but not oily. Then I've just started doing my timing belt because it's age is unknown.
    • In that case it is probably stock. It lives in the navigator side footwell behind the plastic trim just in front of the a pillar.
    • Good question, I don't really know tbh...I'm pretty stock thought, where could I check this?
    • This. I'm confused by the whole discussion. The only reason you would have a car with e85 only if it was track use and you only ever used e85. All other use cases you add a flex fuel sensor, do the flex tune (you only need to do a couple of % and then interpolate the rest) and then you put whatever the hell you feel like including a mix in the tank and it just works. Want a long drive? fill with 98 Want max zoom? fill with e85 Got a half tank of 98 then find e85 somewhere? Throw it in.
×
×
  • Create New...