Jump to content
SAU Community

Recommended Posts

Sorry guys should of said that its out of a ECR33 1995 MOD ITS GOT A SERIES 2 MOTOR IN IT

the condition is a1 its got to adjusting screws on the top and got 5 wires (red,orange,black,yellow,white)

sorry about the pic quailty

Image0111.jpg

Image012.jpg

  • 2 weeks later...

Please note that you only need one of these if you have an atmospheric(sp) BOV, all it does is raise the RPM when you depress the clutch, very handy if you dont want your car stalling at the traffic lights, you can also raise or drop the ideling, which is handy if you are in to drag racing or getting hard launches, interesting to play around with, i have never heard of needing to have two of them, unless you have an RB26 then you may need two, i have one in my R32 Gts-t and it looks just like this one. I did have alot of trouble finding out what it is, and this is what i learnt but feel free to correct me if some one knows better, $50 also seems like a bargin so some one pick it up

  • 3 weeks later...

I'll give you $50 if you can mark which wires go where as im presuming you dont have any install instructions let alone english ones also is all the plug and wiring there? anyway I would need it posted to canberra

let me know

Thanks

Antony

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome Gabriel, and thanks for saving one of the less famous cousins!
    • Wanting to avoid this if possible but kinda looking like I may not have a choice 😭
    • Ok awesome thank you. Just wanted to have them in case I can find some and need to compare part numbers!
    • All I can say Duncan is good luck and I hope that Neil did not run any E85 in Cheryl. I have recently experienced the full spectrum of fuel tank issues in my R33's that had been caused by E85 and contaminated fuel. When you take the cover off the top of the tank and have a look inside you will get an understanding of how easy it will be. Best case situation is clean fuel with minimal contamination. My GTR was like this and it was a very simple operation to just grab the fuel pump carrier bracket and slide it up and out of the tank. My three GTS_T's had different levels of fuel contamination that was probably caused by E85 in the fuel.  In the worst case all of the metal components in the tank had rusted to the point where there were pieces of rusted metal swirling around in the tank. This required the removal of the exhaust, the tailshaft, the complete rear cradle and the fuel tank. The components in the tank were that rusted that it took days to get the fuel pump carrier and the mounting brackets out of the tank. When the tank was finally cleaned, everything inside the tank had to be replaced. With the tank all back together I could then reinstall it in the car along with everything else that had to come out. Good luck and I hope that you find a clean tank.    
    • It is a two door. It is black and also still has the OEM wheels and stereo. Exact model would be KR_R32RGFEL_SS According to GTR-Registry.com is a 2 Door Coupe; RB20DE; 2WD no HICAS; MT.F5; (11L) Projector Headlamps and Fog Lights; (12_) Electronic Active Full Auto Air Con (Climate Control); (13-14SS) V Selection -- Which seems to be accurate description of my variant. Will try to upload a few pictures soon. The OEM wheels look like the below image. Image is taken from the goo-net-exchange website.  
×
×
  • Create New...