Jump to content
SAU Community

Recommended Posts

Guest Tempest

Now there is something i am somewhat unclear of...

I have asked twice already if you import a car from japan do all mods have to be removed and destroyed... Both times i have got the answer "correct"

Now.. could someone explain why it is that anyone would purchase a car "highly modified" if all the mods are to be taken off before they actually get it?

This may seem very noob of me but i intend to import soonish.. and i am getting some idea's of how it all works.

I downloaded the FAQ's from www.prestigemotorsport.com but it didn't answer the question fully...

Link to comment
https://www.sau.com.au/forums/topic/18421-car-details-before-purchase/
Share on other sites

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

It is dependant on how the car enters the country, so there should be nothing to stop you taking off the parts overseas and shipping them with the car .. as long as the car itself is 100% stock and any aftermarket parts are not fitted prior to registration.

it all seems to simple to remove the mods and get them shipped over seperately ... its going to cost $'s to:

a) remove the mods

B) source stock bits

c) install stock bits

d) send over original mods seperately

e) re-install mods when landed

i wonder by the end of it how much you've really saved...?

  • 2 months later...

Question:

When is a RAW NOT a RAW?

Answer:

When they leave on or re-fit after market(non-conforming parts) with-out evidence!!!

This is going to be a huge problem for "some" of the RAW workshops here in Aust particularly the ones importing Skylines,as to import and sell a stock33 will be about as saleable as a" pair of trousers filles with African killer bees" . and some Raws have allready gone out and publically said"If they think I am going to remove a S/Steel Trust exhaust of a vehicle and destroy it ,they must think I am a F%CK$# Idiot" un-quote!!!!

I wonder how long someone will be a RAW for with that kind of attitude?

What would happen to somebody who has paid a deposit to a RAW to import a modified Skyline, and the vehicle gets inspected and the RAW gets an audit and nailed? where would that leave the client and his vehicle???

Originally posted by regan

What would happen to somebody who has paid a deposit to a RAW to import a modified Skyline, and the vehicle gets inspected and the RAW gets an audit and  nailed? where would that leave the client and his vehicle???

Can someone PLz answer this question

A raw without a licence... workshop... and probably in Jail.... or fined heavily.

The customer..... without a car... and probably out of pocket a lot due to the car (probably) being destroyed or re exported.....

(Just guessing here)......

hehe..

anyway, i wouldn't be trying to get an importer to push the rules as they'll be regular inspections. The only people that are going to suffer from this are those trying to do the dodgy, or you when you're car gets taken back or destroyed. That is one of the whole reasons the new scheme was brought in the first place, to stop some of that from happening.

Originally posted by P1E

I am currently importing a vehicle through Geoff and he has assured me that this is untrue. :confused:

Yes, that is true - ALL aftermarket parts will have to be destroyed or re-exported with evidence provided to keep the RAWS out of hot water when they get checked out by the DOTARS.

At this stage it appears that this may even include stupid things like gear shift knobs and additional gauges .. nobody really knows how strict they will be with enforcing these laws so it will be a case of "better safe than sorry"

I would not personally suggest importing any car with modified parts unless you are prepared to lose them and wear the cost of buying stock parts to replace them .. trying to "sneak" anything through at this stage would be just plain stupid for you and beyond belief for the RAWS workshop.

Hi Pie,

If you are talking about a 15Y/O vehicle, a/m gear can be left installed as the only dramas you may encounter will be the local Licencing authorities. and it may just be a case of removing some of the parts to licence the vehicle.

Although if you have been "promised" a vehicle imported by a RAW(SEVS) vehicle with the non-conforming parts retained or re-fitted then be very very carefull. In fact if anybody from"DOTARS"is monitoring this thread then I would say you are allready shot! and possibly the company you have mentioned!!!!!

I would guess that if a RAW was caught out with your vehicle in his premisis that was signed -off and found NOT to be conforming to his evidence ie:17" Rims fitted or S/steel exhaust ect then you would be without your vehicle, and DOTARS would not care who owns it ,as it would come down to a legal claim between you and the RAW, not DOTARS.....

I'm looking to import a relatively stock Series II R33, although a couple I have looked at have had a few small extras (GT-R seats, rims, gauges, etc.).

I was originally under the impression that all aftermarket parts had to be destroyed, but Geoff explained that such rumours are completely unfounded.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, pretty much what you said is a good summary. The aftermarket thing just attached to the rim, then has two lines out to valve stems, one to inner wheel, one to outer wheel. Some of the systems even start to air up as you head towards highway speed. IE, you're in the logging tracks, then as speeds increase it knows you're on tarmac and airs up so the driver doesn't even have to remember. I bet the ones that need driver intervention to air up end up seeing a lot more tyre wear from "forest pressures" in use on the highway!
    • Yes, but you need to do these type certifications for tuning parts. That is the absurd part here. Meaning tuning parts are very costly (generally speaking) as well as the technical test documentation for say a turbo swap with more power. It just makes modifying everything crazy expensive and complicated. That bracket has been lost in translation many years ago I assume, it was not there.
    • Hahaha, yeah.... not what you'd call a tamper-proof design.... but yes, with the truck setup, the lines are always connected, but typically they sit just inside the plane of the rear metal mudguards, so if you clear the guards you clear the lines as well. Not rogue 4WD tracks with tree branches and bushes everywhere, ready to hook-up an air hose. You can do it externally like a mod, but dedicated setups air-pressurize the undriven hubs, and on driven axles you can do the same thing, or pressurize the axles (lots of designs out there for this idea)... https://www.trtaustralia.com.au/traction-air-cti-system/  for example.... ..the trouble I've got here... wrt the bimmer ad... is the last bit...they don't want to show it spinning, do they.... give all the illusion that things are moving...but no...and what the hell tyre profile is that?...25??? ...far kernel, rims would be dead inside 10klms on most roads around here.... 😃
    • You're just describing how type certification works. Personally I would be shocked to discover that catalytic converter is not in the stock mounting position. Is there a bracket on the transfer case holding the catalytic converter and front pipe together? If so, it should be in stock position. 
    • You talking about the ones in the photo above? I guess that could make sense. Fixed (but flexible) line from the point up above down to the hubcap thingo, with a rotating air seal thingo. Then fixed (but also still likely flexible) line from the "other side" of the transfer in the hub cap thingo up to the valve stem on the rim. A horrible cludge, but something that could be done. I'd bet on the Unimog version being fed through from the back, as part of the axle assembly, without the need for the vulnerable lines out to the sides. It's amazing what you can do when you have an idea that is not quite impossible. Nearly impossible, but not quite.
×
×
  • Create New...