Jump to content
SAU Community

Recommended Posts

Drove my ceffy up to winton today to watch drift atack, found out my spedo is 10k's out no drama but had a funny feeling its to free reving.

I was doing 110 just under 4000rpm in 5th gear?

Im pressuming that because my car had a manual conversion in japan they probably keep the stock auto diff but would that acount for that high?

What are you guys sitting on at 100 or 110k

Link to comment
https://www.sau.com.au/forums/topic/184219-rpm-reading/
Share on other sites

Yeah mine sits a lot lower than 4000@ 100 in 5th. I have done a manual conversion on mine since it's been in aus too so it shouldn't be any different. I still have the stock auto diff too, not sure if there is any difference with the manual one.

Link to comment
https://www.sau.com.au/forums/topic/184219-rpm-reading/#findComment-3338259
Share on other sites

my first ceffy sat on around 3-3.5krpm @ 110-ish, my new one doesnt have a working speedo but it seems to travel with the traffic at about the same rpm. my 33 sits very similar in the revs but it has a 3.79? ratio diff, so the gear ratios in rb25 boxes are definately different. do you know what type of gearbox you have?

Link to comment
https://www.sau.com.au/forums/topic/184219-rpm-reading/#findComment-3347171
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pete knows these cars well, he does my car too, if he was concerned about the traction arm length for your use he would have said so. Do you have adjustable bushes in that arm, maybe he got enough adjustment there (or maybe the bump steer was not material for your use of the car)
    • Hmm. Yes. I should have been clearer. 1000s for Haltech, for extra headroom. 725s for Nistune. You might even be OK with 640s, but if the possible power ends up much more than 300 rwkW you will run out of headroom on the 640s. That would probably be OK and a signal to not push it to that sort of power with Nistune anyway. At that level you probably do want to be thinking about engine protection functions. Oh, and all of that presumes 98 only, not E85. Well....the 1000s would allow you to run E85 at ~300rwkW territory, again, maybe sort of running out of headroom. Hard to tell with E85 - depends on the tuner as to how rich they like to set it up.
    • Yes.  The only scenario I can imagine when the answer isn't yes, is if you drive like there is highway patrol behind you at all times.  If your car currently runs, enjoy it and keep saving. Better costs more, keep saving until you can budget the better ECU. It's worth it.  Nope. Plenty of us making >300kw on unopened motors. Mine is unopened and makes about 350kw if I turn everything up, its fine (lots of caveats here, how the car will be used/abused, how long you expect the engine to last between rebuilds, how has the engine been maintained prior to coming into your ownership, etc etc).   
    • Sorry just wanting to clarify, at this power goal, which should I be going? Also, More info regarding suspension, the rear upper camber arms were used to get the camber back to i believe around -0.5 ~ -1 degree (@ Road and Race in Rydalmere), I forgot the exact figure, but ALOT less camber than what it came originally which was like -2.5degrees. Are the traction arms still recommended? The bilsteins from SydneyKid, they've got 400lb/in fronts & 275/in in the rear, revalved to his specs. Intercooler, I'm just having a look at some on Rakuten.jp and some other japanese sites. Might get something from back there, GReddy, Blitz or HPI, all crossflow. Looking at roughly $450-$500 AUD + shipping... Theres not many choices except that chinese branded Justjap unless you go for blitz return flow. Yeah, only downside with Haltech is the price ahhaha, so expensive, and with all the sensors if I go that route... $$$$$ yeesh. Are headstuds/gaskets needed for <300akw?
×
×
  • Create New...