Jump to content
SAU Community

Recommended Posts

Greetings fellow Skyline enthusiasts!

I am a new member here altho i have been browsing the forums for some time now. I am also a member of NS.com.

Unfortunately i do not know too much about Skylines, so you will have to bear with me at times. Hope i can make a good positive contribution to this community :)

One of the main reasons i am here is because i am finally selling off my beloved s13 and upgrading to r34 GT-T Skyline (my dream car for some time now!). I am looking at buying one from an importer here on the Gold Coast but firstly i would like to get some feeback on a few queries of mine.

Firstly, how much is too much (in ur opinion)... regarding km's on a freshly imported 34?

Secondly, im not too fussed about Auto or Manual, but can anyone shed some light on the responsiveness and overall feel of the tiptronic gearbox?

and lastly, what things should i look out for when inspecting the car and should i take it to a mechanics first to get it all checked out and get some tests done?

Thanks guys, look forward to your feedback!

Link to comment
https://www.sau.com.au/forums/topic/184247-greetings/
Share on other sites

1. km's mean nothing as *every* import has its speedo wound back (***not every single one has, but its very rare to find a car with genuine kms, spend more time on #3 as its more important)

2. nfi, get a manual

3. first thing i normally look at is panel alignment, and look at bolts on guards etc to see if they've been removed. the way i see it, every single part that makes up your car is bolted to the chassis, anything thats f*cked can be replaced, no matter how big of a job it may be, it can still be replaced. but if the chassis/body itself has worn impact, it cant be replaced without buying another car basically.

next, get them to start it and look out for odd coloured smoke etc, although some blue/gray smoke at startup is normal, as long as its not excessive (should be very little on a new-ish car like a 34gtt) take it for a drive, make sure it pulls hard through the gears. most places will get pissed off at doing this, but f*ck em, if your spening up big, dont take no chances. make sure you go through every gear (not flat out, leave that for 1st and 2nd) make sure the box feels good, and the motor is smooth listen for any wierd noises, check temp guages etc.

get a mechanic to compression test etc on the motor, and check the car over, this may be worth a few hundred bucks but well worth it, just make sure u take it to a reputable mechanic, dont bother with RACQ as i've heard they dont know sh*t when it comes to imports (RACV, but im guessing it'll be the same up in QLD)

make sure it stops well, a good hard step on the pedal will tell u this, dont warn the person from the shop thats with u if u dont like em lol

another thing i like to do is just assess the interiors general condition, but dont put too much importance on this as some places may go over it to freshen it up before they sell it, however if you find a car with 'only' 30,000km and severally worn steering wheel and handbrake, run.... make sure u punch the guy on the way out too :thumbsup:

i'm no pro but at least that ^ is a start. more ppl will add to it

cheers,

VB

Link to comment
https://www.sau.com.au/forums/topic/184247-greetings/#findComment-3336391
Share on other sites

thanks for the reply VB-

does anyone know how much difference there is between the coupe and the sedan in terms of handling and power? Obviously the sedan is heavier therefore slower, but if someone could give some input from personal experience would be greatly appreciated?

Also what's everyone view on the r34 sedans?

Link to comment
https://www.sau.com.au/forums/topic/184247-greetings/#findComment-3338113
Share on other sites

I drive a 4 door auto:

1. Expect to see vehicles between 80k - 120k, be wary of anything saying less. Still, km's don't mean a whole lot to these vehicles.

2. I don't have any issues with it, obviously :D Auto's tend to be cheaper as there's less of a demand

3. All the stuff you'd do with any other car you'd buy.

on sedans: Don't think there is a huge different between them. Having the 2 extra doors though is handy.

Link to comment
https://www.sau.com.au/forums/topic/184247-greetings/#findComment-3338358
Share on other sites

[hi

i just bought a gtt r34 two weeks ago, it had 88.000 on the clock and had the original log book.

great car love it i have trip tronic and i like it.

go for the two door it looks heaps better.

look at spending 20 000 to 25 000 for a good one. try to buy privite by someone who has imported it themself.

most of the car yards sell shit boxs.

good luck

Link to comment
https://www.sau.com.au/forums/topic/184247-greetings/#findComment-3338977
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Very nice - I also have a 92 GTST and hardly see any others around these days
    • When I need something else to edit, I use Movavi. A friend who does video editing on a daily basis recommended me) it's an easy video cutter to use for beginners
    • I need to edit some videos for work but I'm not good at all this. Which video editor can you recommend?
    • I think you're really missing the point. The spec is just the minimum spec that the fuel has to meet. The additive packages can, and do, go above that minimum if the fuel brand feels they need/want to. And so you get BP Ultimate or Shell Ultra (or whatever they call it) making promises to clean your engine better than the standard stuff....simply because they do actually put better additive packages in there. They do not waste special sauce on the plebian fuel if they can avoid it. I didn't say "energy density". I just said "density". That's right, the specific gravity (if you want to use a really shit old imperial description for mass per unit volume). The density being higher indicates a number of things, from reduces oxygen content, to increased numbers of double bonds or cyclic components. That then just happens to flow on to the calorific value on a volume basis being correspondingly higher. The calorific value on a mass basis barely changes, because almost all hydrocarbon materials have a very similar CV per kg. But whatever - the end result is that you do get a bit more energy per litre, which helps to offset some of the sting of the massive price bump over 91. I can go you one better than "I used to work at a fuel station". I had uni lecturers who worked at the Pt Stanvac refinery (at the time they were lecturing, as industry specialist lecturers) who were quite candid about the business. And granted, that was 30+ years ago, and you might note that I have stated above that I think the industry has since collected together near the bottom (quite like ISPs, when you think about it). Oh, did I mention that I am quite literally a combustion engineer? I'm designing (well, actually, trying to avoid designing and trying to make the junior engineer do it) a heavy fuel oil firing system for a cement plant in fricking Iraq, this week. Last week it was natural gas fired this-that. The week before it was LPG fired anode furnaces for a copper smelter (well, the burners for them, not the actual furnaces, which are just big dumb steel). I'm kinda all over fuels.
    • Well my freshly rebuilt RB25DET Neo went bang 1000kms in, completely fried big end bearing in cylinder 1 so bad my engine seized. No knocking or oil pressure issue prior to this happening, all happened within less than a second. Had Nitto oil pump, 8L baffled sump, head drain, oil restrictors, the lot put in to prevent me spinning a bearing like i did to need the rebuild. Mechanic that looked after the works has no idea what caused it. Reckoned it may have been bearing clearance wrong in cylinder 1 we have no idea. Machinist who did the work reckoned it was something on the mechanic. Anyway thats between them, i had no part in it, just paid the money Curiosity question, does the oil system on RB’s go sump > oil pump > filter > around engine? If so, if you had a leak on an oil filter relocation plate, say sump > oil pump > filter > LEAK > around engine would this cause a low oil pressure reading if the sensors was before the filter?   TIA
×
×
  • Create New...