Jump to content
SAU Community

Recommended Posts

Hi guys,

Im currently upgrading my gtt to make 250 odd rwkw safly. now here is my current list of mods,

Turbo back 3inch

HKS fmic

Splitfires

nismo panel air filter

ebc (profec b) set to 10psi

to achieve my goal (250rwkw) i have purchased the following (yet to install)

Emanage Ultimate

HKS Gtrs kit

Nismo 480cc injectors

Tomei gtt fuel pump

Z32 air flow meter

Now my questions are

A. 250 rwkw reliably? any suggestions?

B. is a FPR neccisary on my setup?

Thanks Guys :D

Edited by silverr34gtt
Link to comment
https://www.sau.com.au/forums/topic/184402-injectors-and-fpr/
Share on other sites

all the mods that you need for your power goal are all there. Id say 480cc injectors should be ok without a FPR but if you want one i dont see how it wont be beneficial if you need to increase the fuel pressure. Other than that i hope youve upgraded your clutch and got good tryes to get that power down. good luck

throw the FPR in the bin, and get a set of Nismo 555cc injectors. They'll be the same price as most Nismo injectors.

That will make 250rwkw reliably.

errr you still need a reg, you can't just get rid of it completley......

Id get a reg as well, if nothing else just for piece of mind so you know you've got good fuel pressure. One of the nismo ones are fine and fairly cheap as well.

errr you still need a reg, you can't just get rid of it completley......

he dusnt NEED one..but yeh as mafia said, with 550cc injectors u wouldnt need one, but if youve spent money on the 480's already then just get a reg so that its there if fuel pressure is needed

he dusnt NEED one..but yeh as mafia said, with 550cc injectors u wouldnt need one, but if youve spent money on the 480's already then just get a reg so that its there if fuel pressure is needed

ok so 480's plus a reg will be ok. Yes ill need a clutch before i finish these upgrades

as for tyres i have a set of bridgestone re001 adrenilin's so that wont be an issue (awesome tyres).

Thanks for the input.

he dusnt NEED one..but yeh as mafia said, with 550cc injectors u wouldnt need one, but if youve spent money on the 480's already then just get a reg so that its there if fuel pressure is needed

perhaps were are talking about weather or not he needs an adjustable one. I didn't think you could just take the reg out of the system altogether and not have one. Whats going to govern fuel pressure if there is no reg in the system?

fpr's are also great if you buy injectors that are too big they can help down tune them so you dont over fuel the car, wont people dont look at it that way but they can help out there, hope that helps

ok maybe i wasnt clear enough,

im not saying get rid of the regulator all together. im saying is it necisary to buy an adjustable one. or would the stock one be ok with the increase in flow from the tomei fuel pump. the difference is quite big, standard fuel pump 130 l/min tomei 258 l/min.

would this increase require the after market regultor or will the stock one bypass the exess flow?

ok maybe i wasnt clear enough,

im not saying get rid of the regulator all together. im saying is it necisary to buy an adjustable one. or would the stock one be ok with the increase in flow from the tomei fuel pump. the difference is quite big, standard fuel pump 130 l/min tomei 258 l/min.

would this increase require the after market regultor or will the stock one bypass the exess flow?

ok maybe i wasnt clear enough,

im not saying get rid of the regulator all together. im saying is it necisary to buy an adjustable one. or would the stock one be ok with the increase in flow from the tomei fuel pump. the difference is quite big, standard fuel pump 130 l/min tomei 258 l/min.

would this increase require the after market regultor or will the stock one bypass the exess flow?

ok maybe i wasnt clear enough,

im not saying get rid of the regulator all together. im saying is it necisary to buy an adjustable one. or would the stock one be ok with the increase in flow from the tomei fuel pump. the difference is quite big, standard fuel pump 130 l/min tomei 258 l/min.

would this increase require the after market regultor or will the stock one bypass the exess flow?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You know, that is exactly the thing that I was thinking a coupe of hours ago. I even had a plan for a meme, involving one big one, another big one, and the Old El Paso girl saying "¿por que no los dos?"
    • NoS, 2 of the big ones.
    • Oh, that's grim. Something bad has been happening there.
    • Put an endoscope down the hole and saw this. Not quite all around the bore but a good 60% at least. Chin to the chest and towards further disappointments I guess.
    • 2 does "sort of" applies, maybe......but looking at what parts would be needed for the swap to get engineered, registered, and insured, and basically that's everything under the car, the modifications the make it legal would be problematic and horrendously expensive, all for a street car that just cruises around and hits a few twisty roads on the weekends Also, from looking at the NSW rules and Regs, with all modifications that is required just to make the car safe and not twist itself to pieces, and then actually get registered for street use, may still be impossible nowadays As for 1, when you add in a fresh engine, fresh transmission, rear cradle and diff, tailshaft, suspension, brakes, cooling, and all the other fabrication required, your probably looking at up to $100k to do it right, all for a 20 year old MX5 that is over engineered and you would never be able to actually use the power it has on the street, much like your beastie, which I love, but you actually track that thing and can use all of its powers in anger, in a safe environment  Hell, the old Bogan Cruise Ship had more power than I could use on the street, and in hindsight, I went a bit silly on that thing, it didn't really need the 500hp it had for what I actually used the car for, it was fun, but basically unusable on the street if you value your licence  As for cams, yeah, I'll probably book it in for them to get installed and tuned soonish, like next month after MX5 Mania are back at work....... and yes, I've already sent a email to bin the turbo quote and quote instead to install cams and a new Fluidampr balancer that will suit the 2.5 better than the OEM 2.0 balancer that is swapped over for the 2.5 install, as the balancer needs to get pulled to time the cams it's a while your in there sort of thing I did think a bit about flex fuel for a laugh, but being na, and no where really around locally anymore to get E85, I've binned that idea, so no sweet sweet corn smells are set for the car I wish E85 was more of a standard fuel, it's better for the environment, better for tuning, plus that sweet sweet smell we all love As for fitting in the family, that's not needed, as everyone in the family already owns a car that can seat 5 humans comfortably enough, the MX5 is "my toy" As for buying a car that is already built, nah, I would rather pick and choose my parts, I enjoy the process, and in the big picture, the additional cost is well worth the enjoyment, and the occasional frustration, I get out of doing it, albeit with other people spinning the spanners, and me, just paying the invoice 🤣
×
×
  • Create New...